On Sat, Mar 21, 2026 at 05:23:20PM +0100, Cristian Cozzolino via B4 Relay wrote:
> From: Cristian Cozzolino <[email protected]>
>
> Document Novatek NT35532-based DSI display panel.
>
> Signed-off-by: Cristian Cozzolino <[email protected]>
> ---
> .../bindings/display/panel/novatek,nt35532.yaml | 77
> ++++++++++++++++++++++
> MAINTAINERS | 5 ++
> 2 files changed, 82 insertions(+)
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + const: novatek,nt35532
This is not enough to identify the panel. This name identifies the
controller inside the panel, however the exact settings (and the
behaviour) would depend on the exact TFT "glass" used with this
controller. Downstream usually doesn't care that much and frequently
just uses the controller name or the the controller with some kind of
"description" like ("wqhd-dsc-cmd").
What does it mean for the upstream:
- Try identifying the actual panel used for the phones. Sometimes
googling for spare or replacement parts would reveal such a name.
Sometimes it can be seen as a marking on the cable or on the backside
of the panel (again, googling).
- If not found, come up with some artificial identifier that would
identify the controller+glass combo (e.g. "tianma,fhd-video" or
"lenovo,j606f-boe-nt36523w" (where lenovo,j6006f is a device name and
boe is a "supplier").
- Either use both strings for compat property:
compatible = "tianma,fhd-video", "novatek,nt36672a"
or just the first one.
> +
> + reg:
> + maxItems: 1
> +
> + backlight: true
> + reset-gpios: true
> +
> + avdd-supply:
> + description: positive boost supply regulator
> +
> + avee-supply:
> + description: negative boost supply regulator
> +
> + vci-supply:
> + description: regulator that supplies the analog voltage
> +
> + vddam-supply:
> + description: power supply for MIPI interface
> +
> + vddi-supply:
> + description: regulator that supplies the I/O voltage
> +
> + port: true
> +
> +required:
> + - compatible
> + - reg
> + - reset-gpios
> + - vddi-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "novatek,nt35532";
> + reg = <0>;
> +
> + backlight = <&pmi8950_wled>;
> + reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
> + avdd-supply = <&lab>;
> + avee-supply = <&ibb>;
> + vci-supply = <&pm8953_l17>;
> + vddi-supply = <&pm8953_l6>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a626dee5c106..8ed2866bbd6e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8171,6 +8171,11 @@ T: git
> https://gitlab.freedesktop.org/drm/misc/kernel.git
> F: Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
> F: drivers/gpu/drm/panel/panel-novatek-nt35510.c
>
> +DRM DRIVER FOR NOVATEK NT35532 PANELS
> +M: Cristian Cozzolino <[email protected]>
> +S: Maintained
> +F: Documentation/devicetree/bindings/display/panel/novatek,nt35532.yaml
> +
> DRM DRIVER FOR NOVATEK NT35560 PANELS
> M: Linus Walleij <[email protected]>
> S: Maintained
>
> --
> 2.53.0
>
>
--
With best wishes
Dmitry
