Just noticed that Eric's address was wrong, so resend with corrected Cc. Eric, my intial report was http://lkml.org/lkml/2008/2/6/300
> Am Thursday, den 7 February hub Krzysztof Oledzki folgendes in die Tasten: > > Hi! > > > >While installing my new firewall I got the following kernel panic in > > >the MPT SAS driver which I need for the disks. > > > >The first kernel I bootet was 2.6.23.14 which did panic so I tried a > > >2.6.24 which panics, too. Our usual FAI kernel (2.6.23.9) is also > > >affected. > > > Could you please try 2.6.22-stable? > > Yes it works :-/ > > I've put some things which on the web which might be helpful: > > dmesg http://files.rfc2324.org/mptsas_panic/2.6.22-dmesg > lspci -v http://files.rfc2324.org/mptsas_panic/2.6.22-lspci-v > .config http://files.rfc2324.org/mptsas_panic/2.6.22-config > > I'll search for the last working kernel and try to break it down to a > commit tommorow when I can get a serial console or direct access. > The Java driven console redirection is everything else than fulfilling :-( > > > It looks *very* similar to my problem: > > > http://bugzilla.kernel.org/show_bug.cgi?id=9909 > > It seems to be the same controller: > > 01:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E > PCI-Express Fusion-MPT SAS (rev 08) > Subsystem: Dell Unknown device 1f10 > Flags: bus master, fast devsel, latency 0, IRQ 16 > I/O ports at ec00 [size=256] > Memory at fc8fc000 (64-bit, non-prefetchable) [size=16K] > Memory at fc8e0000 (64-bit, non-prefetchable) [size=64K] > Expansion ROM at fc900000 [disabled] [size=1M] > Capabilities: [50] Power Management version 2 > Capabilities: [68] Express Endpoint IRQ 0 > Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable- > Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1 > > Stay tuned. > > Ciao > Max -- Follow the white penguin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
