On Sun, 10 Feb 2008, Maximilian Wilhelm wrote:
Am Friday, den 8 February hub Maximilian Wilhelm folgendes in die Tasten:
Just noticed that Eric's address was wrong, so resend with corrected Cc.
Eric, my intial report was http://lkml.org/lkml/2008/2/6/300
Am Thursday, den 7 February hub Krzysztof Oledzki folgendes in die Tasten:
Hi!
While installing my new firewall I got the following kernel panic in
the MPT SAS driver which I need for the disks.
The first kernel I bootet was 2.6.23.14 which did panic so I tried a
2.6.24 which panics, too. Our usual FAI kernel (2.6.23.9) is also
affected.
Could you please try 2.6.22-stable?
Yes it works :-/
I've put some things which on the web which might be helpful:
dmesg http://files.rfc2324.org/mptsas_panic/2.6.22-dmesg
lspci -v http://files.rfc2324.org/mptsas_panic/2.6.22-lspci-v
.config http://files.rfc2324.org/mptsas_panic/2.6.22-config
I'll search for the last working kernel and try to break it down to a
commit tommorow when I can get a serial console or direct access.
The Java driven console redirection is everything else than fulfilling :-(
It looks *very* similar to my problem:
http://bugzilla.kernel.org/show_bug.cgi?id=9909
It seems to be the same controller:
01:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express
Fusion-MPT SAS (rev 08)
Subsystem: Dell Unknown device 1f10
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at ec00 [size=256]
Memory at fc8fc000 (64-bit, non-prefetchable) [size=16K]
Memory at fc8e0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc900000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [68] Express Endpoint IRQ 0
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
I did a git bisect between v2.6.22 v2.6.23 and it seems that
6cb8f91320d3e720351c21741da795fed580b21b
introduced some badness.
Thanks! This was *really* useful!
Now, how about attached patch? Should work with both 2.6.23 and 2.6.24.
Best regards,
Krzysztof Olędzki[SCSI] mpt fusion: Don't oops if NumPhys==0
Don't oops if NumPhys==0, instead return -ENODEV.
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9909
Signed-off-by: Krzysztof Piotr Oledzki <[EMAIL PROTECTED]>
diff -Nur a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
--- a/drivers/message/fusion/mptsas.c 2007-10-09 22:31:38.000000000 +0200
+++ b/drivers/message/fusion/mptsas.c 2008-02-10 17:38:51.000000000 +0100
@@ -1772,6 +1772,11 @@
if (error)
goto out_free_consistent;
+ if (!buffer->NumPhys) {
+ error = -ENODEV;
+ goto out_free_consistent;
+ }
+
/* save config data */
port_info->num_phys = buffer->NumPhys;
port_info->phy_info = kcalloc(port_info->num_phys,
