On Mon, Apr 27, 2026 at 09:34:53PM +0200, Alexandre MINETTE wrote: > Add the PM8921 USB ID interrupt as a disabled extcon provider. Boards > can enable it when their USB controller consumes the PMIC USB ID state > for OTG role detection. > > The interrupt corresponds to PM8921 USB_ID_IN, block 6 bit 1. > > Signed-off-by: Alexandre MINETTE <[email protected]> > --- > arch/arm/boot/dts/qcom/pm8921.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi > b/arch/arm/boot/dts/qcom/pm8921.dtsi > index 535cb6a2543f..30366536f580 100644 > --- a/arch/arm/boot/dts/qcom/pm8921.dtsi > +++ b/arch/arm/boot/dts/qcom/pm8921.dtsi > @@ -121,6 +121,13 @@ ref_muxoff: adc-channel@f { > reg = <0x00 0x0f>; > }; > }; > + > + usb_id: usb-detect {
You should not mix non-addressable children with addressable. If you really do not have address, but other children have, then probably this is part of the main device, so should be folded into the parent node. Best regards, Krzysztof
