At Tue, 12 Feb 2008 12:02:16 +0100,
I wrote:
>
> At Tue, 12 Feb 2008 11:50:36 +0100,
> Matej Laitl wrote:
> >
> > Takashi Iwai wrote:
> > > Matej Laitl wrote:
> > > > after upgrading from 2.6.24 to 2.6.25-rc1, I lost headphone-out sound
> > > > output of my Intel HDA card - it is quiet no matter what the mixer
> > > > settings are.
> > > >
> > > > (...)
> > > >
> > > > The box is Fujitsu-Siemens Esprimo Mobile M9400 laptop.
> > >
> > > Could you give the output of alsa-info.sh for both working and
> > > non-working kernels?
> >
> > The locations of alsa-info.sh outputs:
> > no sound in headphones: http://pastebin.ca/901022
> > sound ok: http://pastebin.ca/901016
> >
> > Both kernels are Linus' tree snapshots as of commit cc13e442952a347f7, the
> > one
> > with working sound has just the f889fa91ad47e commit reverted.
>
> Thanks. It seems that your device has two headphone jacks according
> to the BIOS setup, and this seems to be the problem.
>
> Could you show the kernel messages like "autoconfig: line_outs..." for
> both cases? This appears when build with CONFIG_SND_DEBUG=y.
And the patch below may fix your problem. Give it a try.
Takashi
---
diff -r e84ee72676f0 sound/pci/hda/hda_codec.c
--- a/sound/pci/hda/hda_codec.c Tue Feb 12 12:11:36 2008 +0100
+++ b/sound/pci/hda/hda_codec.c Tue Feb 12 12:31:37 2008 +0100
@@ -2821,6 +2821,30 @@ int snd_hda_parse_pin_def_config(struct
}
}
+ /* FIX-UP:
+ * If no line-out is defined but multiple HPs are found,
+ * some of them might be the real line-outs.
+ */
+ if (!cfg->line_outs && cfg->hp_outs > 1) {
+ int i = 0;
+ while (i < cfg->hp_outs) {
+ /* The real HPs should have the sequence 0x0f */
+ if ((sequences_hp[i] & 0x0f) == 0x0f) {
+ i++;
+ continue;
+ }
+ /* Move it to the line-out table */
+ cfg->line_out_pins[cfg->line_outs] = cfg->hp_pins[i];
+ sequences_line_out[cfg->line_outs] = sequences_hp[i];
+ cfg->line_outs++;
+ cfg->hp_outs--;
+ memmove(cfg->hp_pins + i, cfg->hp_pins + i + 1,
+ sizeof(cfg->hp_pins[0]) * (cfg->hp_outs - i));
+ memmove(sequences_hp + i - 1, sequences_hp + i,
+ sizeof(sequences_hp[0]) * (cfg->hp_outs - i));
+ }
+ }
+
/* sort by sequence */
sort_pins_by_sequence(cfg->line_out_pins, sequences_line_out,
cfg->line_outs);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
