On Tue, Oct 06, 2026 at 03:15:11PM +0300, Muzaffer Kadir via B4 Relay wrote: > From: Muzaffer Kadir <[email protected]> > > Add support for tsens v1 block that exists on MSM8952 > with 11 tsens sensors. Sensor Offsets and slope values > are taken from downstream. > > Link: > https://android.googlesource.com/kernel/msm.git/+/refs/tags/android-wear-7.0.0_r0.3/drivers/thermal/msm-tsens.c#1621 > Signed-off-by: Muzaffer Kadir <[email protected]> > --- > drivers/thermal/qcom/tsens-v1.c | 44 > +++++++++++++++++++++++++++++++++++++++++ > drivers/thermal/qcom/tsens.c | 3 +++ > drivers/thermal/qcom/tsens.h | 2 +- > 3 files changed, 48 insertions(+), 1 deletion(-) > > diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c > index faa5d00788ca..f4201748ea29 100644 > --- a/drivers/thermal/qcom/tsens-v1.c > +++ b/drivers/thermal/qcom/tsens-v1.c > @@ -145,6 +145,37 @@ static const struct reg_field > tsens_v1_regfields[MAX_REGFIELDS] = { > [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), > }; > > +static int __init init_8952(struct tsens_priv *priv) > +{ > + for (int i = 0; i < priv->num_sensors; ++i) > + priv->sensor[i].slope = 3200;
Where are these values coming from? The driver that you pointed out reads them from the QFPROM (like other tsens platforms do). > + > + priv->sensor[0].p1_calib_offset = 2; > + priv->sensor[0].p2_calib_offset = -1; -- With best wishes Dmitry
