Add support for a generic non-pci UHCI companion controller.
Existing board files for arch-vt8500 updated to include UHCI
support.

Signed-off-by: Tony Prisk <li...@prisktech.co.nz>
---
v4:
Add the binding documentation.
Changed the OF .compatibility to 'platform-uhci'

 .../devicetree/bindings/usb/platform-uhci.txt      |   12 ++
 arch/arm/mach-vt8500/bv07.c                        |    1 +
 arch/arm/mach-vt8500/devices-vt8500.c              |    5 +
 arch/arm/mach-vt8500/devices-wm8505.c              |    4 +
 arch/arm/mach-vt8500/devices.c                     |   11 ++
 arch/arm/mach-vt8500/devices.h                     |    1 +
 arch/arm/mach-vt8500/wm8505_7in.c                  |    1 +
 drivers/usb/host/Kconfig                           |   12 ++-
 drivers/usb/host/uhci-hcd.c                        |    5 +
 drivers/usb/host/uhci-platform.c                   |  157 ++++++++++++++++++++
 10 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
 create mode 100644 drivers/usb/host/uhci-platform.c

diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt 
b/Documentation/devicetree/bindings/usb/platform-uhci.txt
new file mode 100644
index 0000000..91477d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt
@@ -0,0 +1,12 @@
+Generic Platform UHCI controllers.
+
+Required properties:
+ - compatible: Should be "platform-uhci".
+ - reg: Address range of the uhci registers
+ - interrupts: Should contain the uhci interrupt.
+
+usb: uhci@D8007301 {
+       compatible = "platform-uhci", "usb-uhci";
+       reg = <0xD8007301 0x200>;
+       interrupts = <0>;
+};
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index a464c75..19d20d9 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -32,6 +32,7 @@ static struct platform_device *devices[] __initdata = {
        &vt8500_device_uart0,
        &vt8500_device_lcdc,
        &vt8500_device_ehci,
+       &vt8500_device_uhci,
        &vt8500_device_ge_rops,
        &vt8500_device_pwm,
        &vt8500_device_pwmbl,
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c 
b/arch/arm/mach-vt8500/devices-vt8500.c
index 19519ae..def7fe3 100644
--- a/arch/arm/mach-vt8500/devices-vt8500.c
+++ b/arch/arm/mach-vt8500/devices-vt8500.c
@@ -48,6 +48,11 @@ void __init vt8500_set_resources(void)
        tmp[1] = wmt_irq_res(IRQ_EHCI);
        wmt_res_add(&vt8500_device_ehci, tmp, 2);
 
+       /* vt8500 uses a single IRQ for both EHCI and UHCI controllers */
+       tmp[0] = wmt_mmio_res(VT8500_UHCI_BASE, SZ_512);
+       tmp[1] = wmt_irq_res(IRQ_EHCI);
+       wmt_res_add(&vt8500_device_uhci, tmp, 2);
+
        tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
        wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
 
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c 
b/arch/arm/mach-vt8500/devices-wm8505.c
index db4594e..c810454 100644
--- a/arch/arm/mach-vt8500/devices-wm8505.c
+++ b/arch/arm/mach-vt8500/devices-wm8505.c
@@ -55,6 +55,10 @@ void __init wm8505_set_resources(void)
        tmp[1] = wmt_irq_res(IRQ_EHCI);
        wmt_res_add(&vt8500_device_ehci, tmp, 2);
 
+       tmp[0] = wmt_mmio_res(WM8505_UHCI_BASE, SZ_512);
+       tmp[1] = wmt_irq_res(IRQ_UHCI);
+       wmt_res_add(&vt8500_device_uhci, tmp, 2);
+
        tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
        wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
 
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
index 1fcdc36..46ff82d 100644
--- a/arch/arm/mach-vt8500/devices.c
+++ b/arch/arm/mach-vt8500/devices.c
@@ -204,6 +204,17 @@ struct platform_device vt8500_device_ehci = {
        },
 };
 
+static u64 uhci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_uhci = {
+       .name           = "platform-uhci",
+       .id             = 0,
+       .dev            = {
+               .dma_mask       = &uhci_dma_mask,
+               .coherent_dma_mask = DMA_BIT_MASK(32),
+       },
+};
+
 struct platform_device vt8500_device_ge_rops = {
        .name           = "wmt_ge_rops",
        .id             = -1,
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
index 188d4e1..0e6d9f9 100644
--- a/arch/arm/mach-vt8500/devices.h
+++ b/arch/arm/mach-vt8500/devices.h
@@ -81,6 +81,7 @@ extern struct platform_device vt8500_device_uart5;
 extern struct platform_device vt8500_device_lcdc;
 extern struct platform_device vt8500_device_wm8505_fb;
 extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_uhci;
 extern struct platform_device vt8500_device_ge_rops;
 extern struct platform_device vt8500_device_pwm;
 extern struct platform_device vt8500_device_pwmbl;
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c 
b/arch/arm/mach-vt8500/wm8505_7in.c
index cf910a9..302ae2f 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -31,6 +31,7 @@ static void __iomem *pmc_hiber;
 static struct platform_device *devices[] __initdata = {
        &vt8500_device_uart0,
        &vt8500_device_ehci,
+       &vt8500_device_uhci,
        &vt8500_device_wm8505_fb,
        &vt8500_device_ge_rops,
        &vt8500_device_pwm,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 83e58df..3d153d0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN
 
 config USB_UHCI_HCD
        tristate "UHCI HCD (most Intel and VIA) support"
-       depends on USB && (PCI || SPARC_LEON)
+       depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
        ---help---
          The Universal Host Controller Interface is a standard by Intel for
          accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,15 @@ config USB_UHCI_HCD
 config USB_UHCI_SUPPORT_NON_PCI_HC
        bool
        depends on USB_UHCI_HCD
-       default y if SPARC_LEON
+       default y if (SPARC_LEON || ARCH_VT8500)
+
+config USB_UHCI_PLATFORM
+       bool "Generic UHCI Platform Driver support"
+       depends on USB_UHCI_SUPPORT_NON_PCI_HC
+       default y if ARCH_VT8500
+       ---help---
+         Enable support for generic UHCI platform devices that require no
+         additional configuration.
 
 config USB_UHCI_BIG_ENDIAN_MMIO
        bool
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e4db350..4b9e9ab 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd";
 #define PLATFORM_DRIVER                uhci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_UHCI_PLATFORM
+#include "uhci-platform.c"
+#define PLATFORM_DRIVER                uhci_platform_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
 #error "missing bus glue for uhci-hcd"
 #endif
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
new file mode 100644
index 0000000..e478049
--- /dev/null
+++ b/drivers/usb/host/uhci-platform.c
@@ -0,0 +1,157 @@
+/*
+ * Generic UHCI HCD (Host Controller Driver) for Platform Devices
+ *
+ * Copyright (c) 2011 Tony Prisk <li...@prisktech.co.nz>
+ *
+ * This file is based on uhci-grlib.c
+ * (C) Copyright 2004-2007 Alan Stern, st...@rowland.harvard.edu
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int uhci_platform_init(struct usb_hcd *hcd)
+{
+       struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+       uhci->rh_numports = uhci_count_ports(hcd);
+
+       /* Set up pointers to to generic functions */
+       uhci->reset_hc = uhci_generic_reset_hc;
+       uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+       /* No special actions need to be taken for the functions below */
+       uhci->configure_hc = NULL;
+       uhci->resume_detect_interrupts_are_broken = NULL;
+       uhci->global_suspend_mode_is_broken = NULL;
+
+       /* Reset if the controller isn't already safely quiescent. */
+       check_and_reset_hc(uhci);
+       return 0;
+}
+
+static const struct hc_driver uhci_platform_hc_driver = {
+       .description =          hcd_name,
+       .product_desc =         "Generic UHCI Host Controller",
+       .hcd_priv_size =        sizeof(struct uhci_hcd),
+
+       /* Generic hardware linkage */
+       .irq =                  uhci_irq,
+       .flags =                HCD_MEMORY | HCD_USB11,
+
+       /* Basic lifecycle operations */
+       .reset =                uhci_platform_init,
+       .start =                uhci_start,
+#ifdef CONFIG_PM
+       .pci_suspend =          NULL,
+       .pci_resume =           NULL,
+       .bus_suspend =          uhci_rh_suspend,
+       .bus_resume =           uhci_rh_resume,
+#endif
+       .stop =                 uhci_stop,
+
+       .urb_enqueue =          uhci_urb_enqueue,
+       .urb_dequeue =          uhci_urb_dequeue,
+
+       .endpoint_disable =     uhci_hcd_endpoint_disable,
+       .get_frame_number =     uhci_hcd_get_frame_number,
+
+       .hub_status_data =      uhci_hub_status_data,
+       .hub_control =          uhci_hub_control,
+};
+
+
+static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+{
+       struct usb_hcd *hcd;
+       struct uhci_hcd *uhci;
+       struct resource *res;
+       int ret;
+
+       if (usb_disabled())
+               return -ENODEV;
+
+       hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
+                       pdev->name);
+       if (!hcd)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       hcd->rsrc_start = res->start;
+       hcd->rsrc_len = resource_size(res);
+
+       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+               pr_err("%s: request_mem_region failed\n", __func__);
+               ret = -EBUSY;
+               goto err_rmr;
+       }
+
+       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+       if (!hcd->regs) {
+               pr_err("%s: ioremap failed\n", __func__);
+               ret = -ENOMEM;
+               goto err_irq;
+       }
+       uhci = hcd_to_uhci(hcd);
+
+       uhci->regs = hcd->regs;
+
+       ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
+                                                               IRQF_SHARED);
+       if (ret)
+               goto err_uhci;
+
+       return 0;
+
+err_uhci:
+       iounmap(hcd->regs);
+err_irq:
+       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+       usb_put_hcd(hcd);
+
+       return ret;
+}
+
+static int uhci_hcd_platform_remove(struct platform_device *pdev)
+{
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+       usb_remove_hcd(hcd);
+       iounmap(hcd->regs);
+       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+       usb_put_hcd(hcd);
+       platform_set_drvdata(pdev, NULL);
+
+       return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_platform_shutdown(struct platform_device *op)
+{
+       struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+       uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id platform_uhci_ids[] = {
+       { .compatible = "platform-uhci", },
+       {}
+};
+
+static struct platform_driver uhci_platform_driver = {
+       .probe          = uhci_hcd_platform_probe,
+       .remove         = uhci_hcd_platform_remove,
+       .shutdown       = uhci_hcd_platform_shutdown,
+       .driver = {
+               .name = "platform-uhci",
+               .owner = THIS_MODULE,
+               .of_match_table = of_match_ptr(platform_uhci_ids),
+       },
+};
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to