It is not currently possible to build the gpmi-nand driver without
also building the mxs-dma driver. Clarify this Kconfig and enable
both in the defconfig file so we can build it again with both enabled.
drivers/built-in.o: In function `gpmi_dma_filter':
clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
Signed-off-by: Arnd Bergmann <a...@arndb.de>
Cc: Shawn Guo <shawn....@linaro.org>
Cc: Sascha Hauer <ker...@pengutronix.de>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/mtd/nand/Kconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
b/arch/arm/configs/imx_v6_v7_defconfig
index f725b96..3c9f32f 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 31bb7e5..8ca4176 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
- depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
+ depends on MTD_NAND && MXS_DMA
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
