On Sun, 19 Aug 2012, Yu, Fenghua wrote: > > From: Henrique de Moraes Holschuh [mailto:h...@hmh.eng.br] > > On Sat, 18 Aug 2012, Fenghua Yu wrote: > > > + char ucode_name[] = > > "kernel/x86/microcode/GenuineIntel/microcode.hex"; > > > > Why name it ".hex" when you're loading binary data? I suggest ".bin". > > It > > is confusing to have .hex there, since you're not dealing with the > > Intel HEX > > format, nor anything text-like. > > > > > +void __init load_ucode_bsp(char *real_mode_data) > > > +{ > > > + u64 ramdisk_image, ramdisk_size, ramdisk_end; > > > + unsigned long initrd_start, initrd_end; > > > + struct boot_params *boot_params; > > > + > > > + boot_params = (struct boot_params *)real_mode_data; > > > + ramdisk_image = boot_params->hdr.ramdisk_image; > > > + ramdisk_size = boot_params->hdr.ramdisk_size; > > > + > > > +#ifdef CONFIG_X86_64 > > > + ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); > > > + initrd_start = ramdisk_image + PAGE_OFFSET; > > > +#else > > > + ramdisk_end = ramdisk_image + ramdisk_size; > > > + initrd_start = ramdisk_image; > > > +#endif > > > + initrd_end = initrd_start + ramdisk_size; > > > + > > > + /* > > > + * It's early to get CPU vendor info at this point. > > > + * By searching initrd to find right name for vendor's microcode, > > > + * it's relative easier to get CPU vendor info. > > > + */ > > > + if (find_ucode_intel(initrd_start, initrd_end) == UCODE_OK) > > > + load_ucode_intel_bsp(real_mode_data); > > > +} > > > > I'd say something down the load_ucode_intel_bsp() chain better check > > the CPU > > vendor to make sure the Intel driver won't attempt to load microcode on > > some > > other vendor's processor. > > > > Or are cpu signatures a global namespace and x86 cpu vendors make sure > > (past, present and future) to never use the same cpu signature as > > someone > > else is going to use? Anyway, it would still might be a good thing to > > do > > the vendor check somewhere to avoid wasting time going over every > > microcode > > of the wrong vendor on generic boot images that have both AMD and Intel > > microcode. > > > > In this early phase, detecting vendor in initrd is much simpler code. > Otherwise, detecting vendor by cpuid (and without cpuid) needs similar but > different code as existing functions and coding would be awkward. > > I fully thought and agreed the usage complexity you describe here. It might > be good thing to do a bit ugly but more practical coding here.
Sure, there is no harm in defering the implementation of this check to later versions of the patch set. As long as the final patch set doesn't risk loading microcode on the wrong vendor or waste a lot of milliseconds trying to match intel microcode to a non-intel cpu, I have no objections :-) But what about the ".hex" naming for the microcode bundle (container) name? I find it confusing, since the file contains binary data, not structured text representing binary data using base 16... this is also something that is of minor importance, but at least it is a very easy thing to change at this point. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/