On 8/28/2012 11:23 AM, Viresh Kumar wrote:
> On 27 August 2012 20:28, Hein Tibosch <[email protected]> wrote:
>>>> +config DW_DMAC_MEM_64_BIT
>>>> +    bool "Allow 64-bit memory transfers"
>>>> +    default y if !AVR32
>>>> +    depends on DW_DMAC
>>>> +    help
>>>> +      Say yes if the DMA controller may do 64-bit memory transfers
>>>> +      For AVR32, say no because only up to 32-bit transfers are
>>>> +      defined
>>> Is this sane to add? Could some non-AVR32 platforms use 64-bit and 32-bit
>>> depending on runtime configuration? E.g. if you build a kernel with support
>>> for multiple boards/processors, and there is a mix of 32-bit and 64-bit wide
>>> DMA support.
>>>
>>> I think it is better to select 32/64-bit at runtime.
>> I did that in the first patch, adding a new property to the dw_dma_slave
>> structure. It had the small disadvantage that some arch code had to be
>> adapted (at32ap700x.c).
>>
>> Viresh, what do you think? Add a property called "mem_64_bit_access" or so?
>>
>> Or should it be passed as a member of 'dw_dma_platform_data', because it
>> is a property of the (entire) DMA controller?
> I think second option is better. But can there be some supportive scenarios of
> first option?
>
> We have a system, with two different memory controllers, one supporting 32 bit
> and other 64 bit?
>
> Or what we can do now is: go with option 2, i.e. update dw_dma_platform_data
> and if some platform like what i mentioned above comes, then we can move it
> to slave data.
What about this:

In case of AVR32, the arch code will indicate:

static struct dw_dma_platform_data dw_dmac0_data = {
        .nr_channels    = 3,
        /* DMAC supports up to 32-bit memory access */
        .mem_access_32_bit_only = true,
};

ARM users won't have to change anything because mem_access_32_bit_only
will be false and therefor 'dw->mem_64_bit' will become true

Signed-off-by: Hein Tibosch <[email protected]>

---
 drivers/dma/dw_dmac.c      |   11 ++++++++---
 drivers/dma/dw_dmac_regs.h |    2 ++
 include/linux/dw_dmac.h    |    2 ++
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 7212961..a37053c 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -618,6 +618,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, 
dma_addr_t src,
                size_t len, unsigned long flags)
 {
        struct dw_dma_chan      *dwc = to_dw_dma_chan(chan);
+       struct dw_dma           *dw = to_dw_dma(dwc->chan.device);
        struct dw_desc          *desc;
        struct dw_desc          *first;
        struct dw_desc          *prev;
@@ -639,7 +640,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, 
dma_addr_t src,
         * We can be a lot more clever here, but this should take care
         * of the most common optimization.
         */
-       if (!((src | dest  | len) & 7))
+       if (dw->mem_64_bit && !((src | dest  | len) & 7))
                src_width = dst_width = 3;
        else if (!((src | dest  | len) & 3))
                src_width = dst_width = 2;
@@ -710,6 +711,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist 
*sgl,
        struct dw_dma_chan      *dwc = to_dw_dma_chan(chan);
        struct dw_dma_slave     *dws = chan->private;
        struct dma_slave_config *sconfig = &dwc->dma_sconfig;
+       struct dw_dma           *dw = to_dw_dma(dwc->chan.device);
        struct dw_desc          *prev;
        struct dw_desc          *first;
        u32                     ctllo;
@@ -746,7 +748,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist 
*sgl,
                        mem = sg_dma_address(sg);
                        len = sg_dma_len(sg);
 
-                       if (!((mem | len) & 7))
+                       if (dw->mem_64_bit && !((mem | len) & 7))
                                mem_width = 3;
                        else if (!((mem | len) & 3))
                                mem_width = 2;
@@ -813,7 +815,7 @@ slave_sg_todev_fill_desc:
                        mem = sg_dma_address(sg);
                        len = sg_dma_len(sg);
 
-                       if (!((mem | len) & 7))
+                       if (dw->mem_64_bit && !((mem | len) & 7))
                                mem_width = 3;
                        else if (!((mem | len) & 3))
                                mem_width = 2;
@@ -1419,6 +1421,9 @@ static int __init dw_probe(struct platform_device *pdev)
                goto err_kfree;
        }
 
+       /* Remember if 64-bit access to memory is allowed */
+       dw->mem_64_bit = !pdata->mem_access_32_bit_only;
+
        dw->regs = ioremap(io->start, DW_REGLEN);
        if (!dw->regs) {
                err = -ENOMEM;
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 9758651..e24562e 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -199,6 +199,8 @@ struct dw_dma {
        struct clk              *clk;
 
        u8                      all_chan_mask;
+       /* 64-bit access to memory is allowed */
+       bool                    mem_64_bit;
 
        struct dw_dma_chan      chan[0];
 };
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
index 2412e02..d01d63f 100644
--- a/include/linux/dw_dmac.h
+++ b/include/linux/dw_dmac.h
@@ -29,6 +29,8 @@ struct dw_dma_platform_data {
 #define CHAN_PRIORITY_ASCENDING                0       /* chan0 highest */
 #define CHAN_PRIORITY_DESCENDING       1       /* chan7 highest */
        unsigned char   chan_priority;
+       /* Make true if 64-bit access to memory is not implemented */
+       bool            mem_access_32_bit_only;
 };
 
 /* bursts size */
-- 
1.7.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to