From: Yang QU <yang...@stericsson.com>
Add 2.7v, 2.9v, 3.0v, 3.2v and 3.3v charging voltage
for backup battery. Before that only 2.5v, 2.6v, 2.8v,
3.1v are available.
Signed-off-by: Yang QU <yang...@stericsson.com>
Signed-off-by: Mathieu Poirier <mathieu.poir...@linaro.org>
Reviewed-by: Maxime COQUELIN <maxime.coque...@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.coo...@stericsson.com>
Reviewed-by: Xiao Mei ZHANG <xiaomei.zh...@stericsson.com>
---
drivers/power/ab8500_charger.c | 9 +++++++--
include/linux/mfd/abx500/ab8500-bm.h | 24 ++++++++++++++++++++----
2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index b3b8f77..8137ea5 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -2834,6 +2834,7 @@ static int ab8500_charger_usb_get_property(struct
power_supply *psy,
static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
{
int ret = 0;
+ u8 bup_vch_range = 0, vbup33_vrtcn = 0;
/* Setup maximum charger current and voltage for ABB cut2.0 */
if (!is_ab8500_1p1_or_earlier(di->parent)) {
@@ -2935,11 +2936,15 @@ static int ab8500_charger_init_hw_registers(struct
ab8500_charger *di)
}
/* Backup battery voltage and current */
+ if (di->bat->bkup_bat_v > BUP_VCH_SEL_3P1V)
+ bup_vch_range = BUP_VCH_RANGE;
+ if (di->bat->bkup_bat_v == BUP_VCH_SEL_3P3V)
+ vbup33_vrtcn = VBUP33_VRTCN;
+
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
- di->bat->bkup_bat_v |
- di->bat->bkup_bat_i);
+ (di->bat->bkup_bat_v & 0x3) | di->bat->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
diff --git a/include/linux/mfd/abx500/ab8500-bm.h
b/include/linux/mfd/abx500/ab8500-bm.h
index cd15ea3..5ae8a6f 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -105,6 +105,7 @@
#define AB8500_RTC_BACKUP_CHG_REG 0x0C
#define AB8500_RTC_CC_CONF_REG 0x01
#define AB8500_RTC_CTRL_REG 0x0B
+#define AB8500_RTC_CTRL1_REG 0x11
/*
* OTP register offsets
@@ -179,10 +180,25 @@
#define BUP_ICH_SEL_300UA 0x08
#define BUP_ICH_SEL_700UA 0x0C
-#define BUP_VCH_SEL_2P5V 0x00
-#define BUP_VCH_SEL_2P6V 0x01
-#define BUP_VCH_SEL_2P8V 0x02
-#define BUP_VCH_SEL_3P1V 0x03
+enum bup_vch_sel {
+ BUP_VCH_SEL_2P5V,
+ BUP_VCH_SEL_2P6V,
+ BUP_VCH_SEL_2P8V,
+ BUP_VCH_SEL_3P1V,
+ /*
+ * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
+ * are only available on ab8540. You can't choose these 5
+ * voltage on ab8500/ab8505/ab9540.
+ */
+ BUP_VCH_SEL_2P7V,
+ BUP_VCH_SEL_2P9V,
+ BUP_VCH_SEL_3P0V,
+ BUP_VCH_SEL_3P2V,
+ BUP_VCH_SEL_3P3V,
+};
+
+#define BUP_VCH_RANGE 0x02
+#define VBUP33_VRTCN 0x01
/* Battery OVV constants */
#define BATT_OVV_ENA 0x02
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
