From: Michel JAOUEN <michel.jao...@stericsson.com>
Add AB9540 and AB8505 support to ab8500_temp
driver.
Signed-off-by: Rajkumar Kasirajan <rajkumar.kasira...@stericsson.com>
Signed-off-by: Mathieu Poirier <mathieu.poir...@linaro.org>
Reviewed-by: Michel JAOUEN <michel.jao...@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.coo...@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.ab...@stericsson.com>
---
drivers/power/ab8500_btemp.c | 71 ++++++++++++++++++++++++++-------
include/linux/mfd/abx500/ab8500-bm.h | 2 +
2 files changed, 58 insertions(+), 15 deletions(-)
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 74cddba..506f124 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -37,6 +37,9 @@
#define BTEMP_BATCTRL_CURR_SRC_7UA 7
#define BTEMP_BATCTRL_CURR_SRC_20UA 20
+#define BTEMP_BATCTRL_CURR_SRC_16UA 16
+#define BTEMP_BATCTRL_CURR_SRC_18UA 18
+
#define to_ab8500_btemp_device_info(x) container_of((x), \
struct ab8500_btemp, btemp_psy);
@@ -212,10 +215,18 @@ static int ab8500_btemp_curr_source_enable(struct
ab8500_btemp *di,
/* Only do this for batteries with internal NTC */
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
- if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
- curr = BAT_CTRL_7U_ENA;
- else
- curr = BAT_CTRL_20U_ENA;
+
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
+ curr = BAT_CTRL_16U_ENA;
+ else
+ curr = BAT_CTRL_18U_ENA;
+ } else {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+ curr = BAT_CTRL_7U_ENA;
+ else
+ curr = BAT_CTRL_20U_ENA;
+ }
dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
@@ -246,11 +257,22 @@ static int ab8500_btemp_curr_source_enable(struct
ab8500_btemp *di,
} else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
- BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
- ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -292,11 +314,20 @@ static int ab8500_btemp_curr_source_enable(struct
ab8500_btemp *di,
* if we got an error above
*/
disable_curr_source:
- /* Write 0 to the curr bits */
- ret = abx500_mask_and_set_register_interruptible(di->dev,
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+ ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+ } else {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ }
+
if (ret) {
dev_err(di->dev, "%s failed disabling current source\n",
__func__);
@@ -510,8 +541,11 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
{
int res;
u8 i;
+ if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ else
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
di->bat->batt_id = BATTERY_UNKNOWN;
res = ab8500_btemp_get_batctrl_res(di);
@@ -548,9 +582,16 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
* detected type is Type 1, else we use the 7uA source
*/
if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
- di->bat->batt_id == 1) {
- dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
- di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ di->bat->batt_id == 1) {
+ if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev,
+ "Set BATCTRL current source to 16uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
+ } else {
+ dev_dbg(di->dev,
+ "Set BATCTRL current source to 20uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ }
}
return di->bat->batt_id;
diff --git a/include/linux/mfd/abx500/ab8500-bm.h
b/include/linux/mfd/abx500/ab8500-bm.h
index 25af2c1..175197c 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -226,6 +226,8 @@
/* BatCtrl Current Source Constants */
#define BAT_CTRL_7U_ENA 0x01
#define BAT_CTRL_20U_ENA 0x02
+#define BAT_CTRL_18U_ENA 0x01
+#define BAT_CTRL_16U_ENA 0x02
#define BAT_CTRL_CMP_ENA 0x04
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
#define BAT_CTRL_PULL_UP_ENA 0x10
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
