Adds DT, pinctrl, and runtime PM support to enable AM33xx.
Signed-off-by: Matt Porter <mpor...@ti.com>
---
drivers/uio/Kconfig | 4 +--
drivers/uio/uio_pruss.c | 90 +++++++++++++++++++++++++++++++++++++----------
2 files changed, 73 insertions(+), 21 deletions(-)
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index c48b938..5db1f34 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -96,10 +96,10 @@ config UIO_NETX
config UIO_PRUSS
tristate "Texas Instruments PRUSS driver"
- depends on ARCH_DAVINCI_DA850
+ depends on ARCH_DAVINCI_DA850 || SOC_AM33XX
select GENERIC_ALLOCATOR
help
- PRUSS driver for OMAPL138/DA850/AM18XX devices
+ PRUSS driver for OMAPL138/DA850/AM18XX and AM33XX devices
PRUSS driver requires user space components, examples and user space
driver is available from below SVN repo - you may use anonymous login
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index 1b55db3..8560958 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -26,6 +26,11 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/genalloc.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
#define DRV_NAME "pruss_uio"
#define DRV_VERSION "1.0"
@@ -120,8 +125,10 @@ static int __devinit pruss_probe(struct platform_device
*dev)
struct uio_info *p;
struct uio_pruss_dev *gdev;
struct resource *regs_prussio;
+ struct resource res;
int ret = -ENODEV, cnt = 0, len;
struct uio_pruss_pdata *pdata = dev->dev.platform_data;
+ struct pinctrl *pinctrl;
gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL);
if (!gdev)
@@ -132,18 +139,51 @@ static int __devinit pruss_probe(struct platform_device
*dev)
kfree(gdev);
return -ENOMEM;
}
- /* Power on PRU in case its not done as part of boot-loader */
- gdev->pruss_clk = clk_get(&dev->dev, "pruss");
- if (IS_ERR(gdev->pruss_clk)) {
- dev_err(&dev->dev, "Failed to get clock\n");
- kfree(gdev->info);
- kfree(gdev);
- ret = PTR_ERR(gdev->pruss_clk);
- return ret;
+
+ if (dev->dev.of_node) {
+ pm_runtime_enable(&dev->dev);
+ ret = pm_runtime_get_sync(&dev->dev);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&dev->dev, "pm_runtime_get_sync() failed\n");
+ return ret;
+ }
+
+ ret = of_address_to_resource(dev->dev.of_node, 0, &res);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&dev->dev, "failed to parse DT reg\n");
+ return ret;
+ }
+ regs_prussio = &res;
+
+ ret = of_property_read_u32(dev->dev.of_node,
+ "ti,pintc-offset",
+ &gdev->pintc_base);
+ if (ret < 0) {
+ dev_err(&dev->dev,
+ "Can't parse ti,pintc-offset property\n");
+ goto out_free;
+ }
} else {
- clk_enable(gdev->pruss_clk);
+ /* Power on PRU in case its not done as part of boot-loader */
+ gdev->pruss_clk = clk_get(&dev->dev, "pruss");
+ if (IS_ERR(gdev->pruss_clk)) {
+ dev_err(&dev->dev, "Failed to get clock\n");
+ kfree(gdev->info);
+ kfree(gdev);
+ ret = PTR_ERR(gdev->pruss_clk);
+ return ret;
+ } else {
+ clk_enable(gdev->pruss_clk);
+ }
+ gdev->pintc_base = pdata->pintc_base;
+ gdev->sram_pool = pdata->l3ram_pool;
}
+ pinctrl = devm_pinctrl_get_select_default(&dev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&dev->dev,
+ "pins are not configured from the driver\n");
+
regs_prussio = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!regs_prussio) {
dev_err(&dev->dev, "No PRUSS I/O resource specified\n");
@@ -155,8 +195,7 @@ static int __devinit pruss_probe(struct platform_device
*dev)
goto out_free;
}
- if (pdata->l3ram_pool) {
- gdev->sram_pool = pdata->l3ram_pool;
+ if (gdev->sram_pool) {
gdev->sram_vaddr =
gen_pool_alloc(gdev->sram_pool, sram_pool_sz);
if (!gdev->sram_vaddr) {
@@ -182,7 +221,6 @@ static int __devinit pruss_probe(struct platform_device
*dev)
goto out_free;
}
- gdev->pintc_base = pdata->pintc_base;
gdev->hostirq_start = platform_get_irq(dev, 0);
for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) {
@@ -190,13 +228,19 @@ static int __devinit pruss_probe(struct platform_device
*dev)
p->mem[0].size = resource_size(regs_prussio);
p->mem[0].memtype = UIO_MEM_PHYS;
- p->mem[1].addr = gdev->sram_paddr;
- p->mem[1].size = sram_pool_sz;
- p->mem[1].memtype = UIO_MEM_PHYS;
-
- p->mem[2].addr = gdev->ddr_paddr;
- p->mem[2].size = extram_pool_sz;
- p->mem[2].memtype = UIO_MEM_PHYS;
+ if (gdev->sram_vaddr) {
+ p->mem[1].addr = gdev->sram_paddr;
+ p->mem[1].size = sram_pool_sz;
+ p->mem[1].memtype = UIO_MEM_PHYS;
+
+ p->mem[2].addr = gdev->ddr_paddr;
+ p->mem[2].size = extram_pool_sz;
+ p->mem[2].memtype = UIO_MEM_PHYS;
+ } else {
+ p->mem[1].addr = gdev->ddr_paddr;
+ p->mem[1].size = extram_pool_sz;
+ p->mem[1].memtype = UIO_MEM_PHYS;
+ }
p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt);
p->version = DRV_VERSION;
@@ -228,12 +272,20 @@ static int __devexit pruss_remove(struct platform_device
*dev)
return 0;
}
+static const struct of_device_id pruss_dt_ids[] = {
+ { .compatible = "ti,pruss-v1", .data = NULL, },
+ { .compatible = "ti,pruss-v2", .data = NULL, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pruss_dt_ids);
+
static struct platform_driver pruss_driver = {
.probe = pruss_probe,
.remove = __devexit_p(pruss_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = pruss_dt_ids,
},
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
