On Mon, Oct 08, 2012 at 11:29:41AM +0530, Kishon Vijay Abraham I wrote:
> ocp2scp was not having pdata support which makes *musb* fail for non-dt
> boot in OMAP platform. The pdata will have information about the devices
> that is connected to ocp2scp. ocp2scp driver will now make use of this
> information to create the devices that is attached to ocp2scp.
> 
> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>

Acked-by: Felipe Balbi <ba...@ti.com>

> ---
>  drivers/bus/omap-ocp2scp.c                 |   67 
> ++++++++++++++++++++++++++--
>  include/linux/platform_data/omap_ocp2scp.h |   31 +++++++++++++
>  2 files changed, 95 insertions(+), 3 deletions(-)
>  create mode 100644 include/linux/platform_data/omap_ocp2scp.h
> 
> diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
> index ff63560..5db8297 100644
> --- a/drivers/bus/omap-ocp2scp.c
> +++ b/drivers/bus/omap-ocp2scp.c
> @@ -22,6 +22,26 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/platform_data/omap_ocp2scp.h>
> +
> +/**
> + * _count_resources - count for the number of resources
> + * @res: struct resource *
> + *
> + * Count and return the number of resources populated for the device that is
> + * connected to ocp2scp.
> + */
> +static unsigned _count_resources(struct resource *res)
> +{
> +     int cnt = 0;
> +
> +     while (res->start != res->end) {
> +             cnt++;
> +             res++;
> +     }
> +
> +     return cnt;
> +}
>  
>  static int ocp2scp_remove_devices(struct device *dev, void *c)
>  {
> @@ -34,20 +54,61 @@ static int ocp2scp_remove_devices(struct device *dev, 
> void *c)
>  
>  static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
>  {
> -     int                     ret;
> -     struct device_node      *np = pdev->dev.of_node;
> +     int ret;
> +     unsigned res_cnt, i;
> +     struct device_node *np = pdev->dev.of_node;
> +     struct platform_device *pdev_child;
> +     struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data;
> +     struct omap_ocp2scp_dev *dev;
>  
>       if (np) {
>               ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
>               if (ret) {
> -                     dev_err(&pdev->dev, "failed to add resources for 
> ocp2scp child\n");
> +                     dev_err(&pdev->dev,
> +                         "failed to add resources for ocp2scp child\n");
>                       goto err0;
>               }
> +     } else if (pdata) {
> +             for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++,
> +                 dev++) {
> +                     res_cnt = _count_resources(dev->res);
> +
> +                     pdev_child = platform_device_alloc(dev->drv_name, -1);
> +                     if (!pdev_child) {
> +                             dev_err(&pdev->dev,
> +                               "failed to allocate mem for ocp2scp child\n");
> +                             goto err0;
> +                     }
> +
> +                     ret = platform_device_add_resources(pdev_child,
> +                         dev->res, res_cnt);
> +                     if (ret) {
> +                             dev_err(&pdev->dev,
> +                              "failed to add resources for ocp2scp child\n");
> +                             goto err1;
> +                     }
> +
> +                     pdev_child->dev.parent  = &pdev->dev;
> +
> +                     ret = platform_device_add(pdev_child);
> +                     if (ret) {
> +                             dev_err(&pdev->dev,
> +                                "failed to register ocp2scp child device\n");
> +                             goto err1;
> +                     }
> +             }
> +     } else {
> +             dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n");
> +             return -EINVAL;
>       }
> +
>       pm_runtime_enable(&pdev->dev);
>  
>       return 0;
>  
> +err1:
> +     platform_device_put(pdev_child);
> +
>  err0:
>       device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
>  
> diff --git a/include/linux/platform_data/omap_ocp2scp.h 
> b/include/linux/platform_data/omap_ocp2scp.h
> new file mode 100644
> index 0000000..5c6c393
> --- /dev/null
> +++ b/include/linux/platform_data/omap_ocp2scp.h
> @@ -0,0 +1,31 @@
> +/*
> + * omap_ocp2scp.h -- ocp2scp header file
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kis...@ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_OMAP_OCP2SCP_H
> +#define __DRIVERS_OMAP_OCP2SCP_H
> +
> +struct omap_ocp2scp_dev {
> +     const char                      *drv_name;
> +     struct resource                 *res;
> +};
> +
> +struct omap_ocp2scp_platform_data {
> +     int                             dev_cnt;
> +     struct omap_ocp2scp_dev         **devices;
> +};
> +#endif /* __DRIVERS_OMAP_OCP2SCP_H */
> -- 
> 1.7.9.5
> 

-- 
balbi

Attachment: signature.asc
Description: Digital signature

Reply via email to