Make the Zynq platform use the newly created zynq clk bindings.
Signed-off-by: Josh Cartwright <josh.cartwri...@ni.com>
---
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/zynq-7000.dtsi | 56 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-zc702.dts | 4 +++
arch/arm/mach-zynq/common.c | 11 ++++++++
drivers/clk/Makefile | 1 +
5 files changed, 73 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 21ed87b..ccfe0ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -959,6 +959,7 @@ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b30e59..bb3085c 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -53,5 +53,61 @@
interrupts = <0 50 4>;
clock = <50000000>;
};
+
+ slcr: slcr@f8000000 {
+ compatible = "xlnx,zynq-slcr";
+ reg = <0xF8000000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ps_clk: ps_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* clock-frequency set in
board-specific file */
+ clock-output-names = "ps_clk";
+ };
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x100 0x110>;
+ clock-output-names = "armpll";
+ };
+ ddrpll: ddrpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x104 0x114>;
+ clock-output-names = "ddrpll";
+ };
+ iopll: iopll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x108 0x118>;
+ clock-output-names = "iopll";
+ };
+ uart_clk: uart_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-periph-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x154>;
+ clock-output-names = "uart0_ref_clk",
+ "uart1_ref_clk";
+ };
+ cpu_clk: cpu_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-cpu-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x120 0x1C4>;
+ clock-output-names = "cpu_6x4x",
+ "cpu_3x2x",
+ "cpu_2x",
+ "cpu_1x";
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index e25a307..86f44d5 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -28,3 +28,7 @@
};
};
+
+&ps_clk {
+ clock-frequency = <33333330>;
+};
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5441323..79bf5fb 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,6 +19,8 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/clk/zynq.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
@@ -96,6 +98,15 @@ static struct map_desc io_desc[] __initdata = {
static void __init xilinx_zynq_timer_init(void)
{
+ struct device_node *np;
+ void __iomem *slcr;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
+ slcr = of_iomap(np, 0);
+ WARN_ON(!slcr);
+
+ xilinx_zynq_clocks_init(slcr);
+
xttcpss_timer_init();
}
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 71a25b9..d35a34c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -19,6 +19,7 @@ endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
+obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
