Use proper clk_prepare/unprepare calls in preparation for switching to
the generic clock framework.
Signed-off-by: Jonas Gorski <jonas.gor...@gmail.com>
---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index c7ca7ec..9449e13 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1677,7 +1677,7 @@ static int __devinit bcm_enet_probe(struct
platform_device *pdev)
ret = PTR_ERR(priv->mac_clk);
goto out_unmap;
}
- clk_enable(priv->mac_clk);
+ clk_prepare_enable(priv->mac_clk);
/* initialize default and fetch platform data */
priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1706,7 +1706,7 @@ static int __devinit bcm_enet_probe(struct
platform_device *pdev)
priv->phy_clk = NULL;
goto out_put_clk_mac;
}
- clk_enable(priv->phy_clk);
+ clk_prepare_enable(priv->phy_clk);
}
/* do minimal hardware init to be able to probe mii bus */
@@ -1808,12 +1808,12 @@ out_uninit_hw:
/* turn off mdc clock */
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->phy_clk) {
- clk_disable(priv->phy_clk);
+ clk_disable_unprepare(priv->phy_clk);
clk_put(priv->phy_clk);
}
out_put_clk_mac:
- clk_disable(priv->mac_clk);
+ clk_disable_unprepare(priv->mac_clk);
clk_put(priv->mac_clk);
out_unmap:
@@ -1864,10 +1864,10 @@ static int __devexit bcm_enet_remove(struct
platform_device *pdev)
/* disable hw block clocks */
if (priv->phy_clk) {
- clk_disable(priv->phy_clk);
+ clk_disable_unprepare(priv->phy_clk);
clk_put(priv->phy_clk);
}
- clk_disable(priv->mac_clk);
+ clk_disable_unprepare(priv->mac_clk);
clk_put(priv->mac_clk);
platform_set_drvdata(pdev, NULL);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
