Sebastian,
On Tue, Dec 18, 2012 at 01:24:29AM +0100, Sebastian Hesselbarth wrote:
> Card detect for sdhci on Cubox is connected to the wrong pin
> (sdio1_cd instead of sdio0_cd). With support for cd-gpios and
> pinctrl add the corresponding properties to DT for Cubox.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
> ---
> Cc: Russell King <li...@arm.linux.org.uk>
> Cc: Jason Cooper <ja...@lakedaemon.net>
> Cc: Andrew Lunn <and...@lunn.ch>
> Cc: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> arch/arm/boot/dts/dove-cubox.dts | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove-cubox.dts
> b/arch/arm/boot/dts/dove-cubox.dts
> index fed7d3f..cdee96f 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -26,10 +26,15 @@
> };
>
> &uart0 { status = "okay"; };
> -&sdio0 { status = "okay"; };
> &sata0 { status = "okay"; };
> &i2c0 { status = "okay"; };
>
> +&sdio0 {
> + status = "okay";
> + /* sdio0 card detect is connected to wrong pin on CuBox */
> + cd-gpios = <&gpio0 12 1>;
this looks like a fix that should be merged into v3.8, I'll cue it up
for v3.8-rc2.
thx,
Jason.
> +};
> +
> &spi0 {
> status = "okay";
>
> @@ -42,9 +47,14 @@
> };
>
> &pinctrl {
> - pinctrl-0 = <&pmx_gpio_18>;
> + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
> pinctrl-names = "default";
>
> + pmx_gpio_12: pmx-gpio-12 {
> + marvell,pins = "mpp12";
> + marvell,function = "gpio";
> + };
> +
> pmx_gpio_18: pmx-gpio-18 {
> marvell,pins = "mpp18";
> marvell,function = "gpio";
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
