This patch adds support for the new PLL module found in WM8750 and
WM8850 SoCs.
Signed-off-by: Tony Prisk <li...@prisktech.co.nz>
---
drivers/clk/clk-vt8500.c | 102 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 100 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index fe25570..d3fefa4 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -41,6 +41,7 @@ struct clk_device {
#define PLL_TYPE_VT8500 0
#define PLL_TYPE_WM8650 1
+#define PLL_TYPE_WM8750 2
struct clk_pll {
struct clk_hw hw;
@@ -298,6 +299,16 @@ static __init void vtwm_device_clk_init(struct device_node
*node)
#define WM8650_BITS_TO_VAL(m, d1, d2) \
((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+/* Helper macros for PLL_WM8750 */
+#define WM8750_PLL_MUL(x) (((x >> 16) & 0xFF) + 1)
+#define WM8750_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 7)))
+
+#define WM8750_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * (m+1) / ((d1+1) * (1 << d2)))
+
+#define WM8750_BITS_TO_VAL(f, m, d1, d2) \
+ ((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)
+
static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
u32 *multiplier, u32 *prediv)
@@ -366,11 +377,82 @@ static void wm8650_find_pll_bits(unsigned long rate,
unsigned long parent_rate,
*divisor2 = div2;
}
+static u32 wm8750_get_filter(u32 parent_rate, u32 divisor1)
+{
+ /* calculate frequency (MHz) after pre-divisor */
+ u32 freq = (parent_rate / 1000000) / (divisor1 + 1);
+
+ if ((freq < 10) || (freq > 200))
+ pr_warn("%s: PLL recommended input frequency 10..200Mhz
(requested %d Mhz)\n",
+ __func__, freq);
+
+ if (freq >= 166)
+ return 7;
+ else if (freq >= 104)
+ return 6;
+ else if (freq >= 65)
+ return 5;
+ else if (freq >= 42)
+ return 4;
+ else if (freq >= 26)
+ return 3;
+ else if (freq >= 16)
+ return 2;
+ else if (freq >= 10)
+ return 1;
+
+ return 0;
+}
+
+static void wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *filter, u32 *multiplier, u32 *divisor1,
u32 *divisor2)
+{
+ u32 mul, div1, div2;
+ u32 best_mul, best_div1, best_div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 1; div1 >= 0; div1--)
+ for (div2 = 7; div2 >= 0; div2--)
+ for (mul = 0; mul <= 255; mul++) {
+ tclk = parent_rate * (mul + 1) / ((div1 + 1) *
(1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *filter =
wm8750_get_filter(parent_rate, div1);
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ best_mul = mul;
+ best_div1 = div1;
+ best_div2 = div2;
+ }
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+
+ *filter = wm8750_get_filter(parent_rate, best_div1);
+ *multiplier = best_mul;
+ *divisor1 = best_div1;
+ *divisor2 = best_div2;
+}
+
static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
- u32 mul, div1, div2;
+ u32 filter, mul, div1, div2;
u32 pll_val;
unsigned long flags = 0;
@@ -385,6 +467,9 @@ static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned
long rate,
wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
break;
+ case PLL_TYPE_WM8750:
+ wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1,
&div2);
+ pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
default:
pr_err("%s: invalid pll type\n", __func__);
return 0;
@@ -405,7 +490,7 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned
long rate,
unsigned long *prate)
{
struct clk_pll *pll = to_clk_pll(hw);
- u32 mul, div1, div2;
+ u32 filter, mul, div1, div2;
long round_rate;
switch (pll->type) {
@@ -417,6 +502,9 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned
long rate,
wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
break;
+ case PLL_TYPE_WM8750:
+ wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
+ round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
default:
round_rate = 0;
}
@@ -440,6 +528,10 @@ static unsigned long vtwm_pll_recalc_rate(struct clk_hw
*hw,
pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
pll_freq /= WM8650_PLL_DIV(pll_val);
break;
+ case PLL_TYPE_WM8750:
+ pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
+ pll_freq /= WM8750_PLL_DIV(pll_val);
+ break;
default:
pll_freq = 0;
}
@@ -508,10 +600,16 @@ static void __init wm8650_pll_init(struct device_node
*node)
vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
}
+static void __init wm8750_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8750);
+}
+
static const __initconst struct of_device_id clk_match[] = {
{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
{ .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, },
{ .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, },
+ { .compatible = "wm,wm8750-pll-clock", .data = wm8750_pll_init, },
{ .compatible = "via,vt8500-device-clock",
.data = vtwm_device_clk_init, },
{ /* sentinel */ }
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
