On Thu, Dec 20, 2012 at 04:41:38PM +0100, Stephane Eranian wrote:
> This patch adds support for memory profiling using the
> PEBS Load Latency facility.
>
> Load accesses are sampled by HW and the instruction
> address, data address, load latency, data source, tlb,
> locked information can be saved in the sampling buffer
> if using the PERF_SAMPLE_COST (for latency),
PERF_SAMPLE_WEIGHT ?
> PERF_SAMPLE_ADDR, PERF_SAMPLE_DSRC types.
>
> To enable PEBS Load Latency, users have to use the
> model specific event:
> - on NHM/WSM: MEM_INST_RETIRED:LATENCY_ABOVE_THRESHOLD
> - on SNB/IVB: MEM_TRANS_RETIRED:LATENCY_ABOVE_THRESHOLD
>
> To make things easier, this patch also exports a generic
> alias via sysfs: mem-loads. It export the right event
> encoding based on the host CPU and can be used directly
> by the perf tool.
>
> Loosely based on Intel's Lin Ming patch posted on LKML
> in July 2011.
>
> Signed-off-by: Stephane Eranian <eran...@google.com>
SNIP
> +/*
> + * Map PEBS Load Latency Data Source encodings to generic
> + * memory data source information
> + */
> +#define P(a, b) PERF_MEM_S(a, b)
> +#define OP_LH (P(OP, LOAD) | P(LVL, HIT))
> +#define SNOOP_NONE_MISS (P(SNOOP, NONE) | P(SNOOP, MISS))
> +
I checked Intel SDM 'Table 18-13. Data Source Encoding for Load Latency Record'
and it seems to be different (below) at some points.. did you use another
source?
> +static const u64 pebs_data_source[] = {
> + P(OP, LOAD) | P(LVL, MISS) | P(LVL, L3) | P(SNOOP, NA),/* 0x00:ukn L3 */
> + OP_LH | P(LVL, L1) | P(SNOOP, NONE), /* 0x01: L1 local */
> + OP_LH | P(LVL, LFB)| P(SNOOP, NONE), /* 0x02: LFB hit */
> + OP_LH | P(LVL, L2) | P(SNOOP, NONE), /* 0x03: L2 hit */
> + OP_LH | P(LVL, L3) | P(SNOOP, NONE), /* 0x04: L3 hit */
> + OP_LH | P(LVL, L3) | P(SNOOP, MISS), /* 0x05: L3 hit, snoop miss */
> + OP_LH | P(LVL, L3) | P(SNOOP, HIT), /* 0x06: L3 hit, snoop hit */
0x6:
L3 HIT. Local or Remote home requests that hit the L3 cache and was serviced by
another processor core with a cross core snoop where modified copies were found.
(HITM).
> + OP_LH | P(LVL, L3) | P(SNOOP, HITM), /* 0x07: L3 hit, snoop hitm */
0x7:
Reserved
> + OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HIT), /* 0x08: L3 miss snoop hit */
> + OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HITM), /* 0x09: L3 miss snoop hitm*/
0x9:
Reserved
> + OP_LH | P(LVL, LOC_RAM) | P(SNOOP, HIT), /* 0x0a: L3 miss, shared */
> + OP_LH | P(LVL, REM_RAM1) | P(SNOOP, HIT), /* 0x0b: L3 miss, shared */
> + OP_LH | P(LVL, LOC_RAM) | SNOOP_NONE_MISS,/* 0x0c: L3 miss, excl */
> + OP_LH | P(LVL, REM_RAM1) | SNOOP_NONE_MISS,/* 0x0d: L3 miss, excl */
> + OP_LH | P(LVL, IO) | P(SNOOP, NONE), /* 0x0e: I/O */
> + OP_LH | P(LVL,UNC) | P(SNOOP, NONE), /* 0x0f: uncached */
> +};
thanks,
jirka
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
