Hi,
On Thursday 07 February 2013 11:51 AM, Rajendra Nayak wrote:
[]...
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt
b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 29a043e..4688265 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -15,6 +15,7 @@ OMAP MUSB GLUE
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply
upto
100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
SOC specific device node entry
usb_otg_hs: usb_otg_hs@4a0ab000 {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts
b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..cb07583 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
*/
ti,pulldowns = <0x03a1c4>;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts
b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..afb9ba9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..4b3d157 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..b6472f7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,17 @@
ti,timer-alwon;
ti,timer-secure;
};
+
+ usb_otg_hs: usb_otg_hs@480ab000 {
+ compatible = "ti,omap3-musb";
+ reg = <0x480ab000 0x1000>;
+ interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupt-names = "mc", "dma";
+ ti,hwmods = "usb_otg_hs";
+ usb-phy = <&usb2_phy>;
+ multipoint = <1>;
+ num_eps = <16>;
+ ram_bits = <12>;
Where are these bindings documented? The general convention is to use
a '-' for property names and not '_'
It's documented in Documentation/devicetree/bindings/usb/omap-usb.txt
Actually the documentation and the drivers got merged with this binding
long back.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
