This patch fix a problem XScale port
detect code in autoconfig_16550a treat
16550A port as XScale port, caused by
CH352 device use the 6th bit(UART_IER_UUE)
in IER as a enhance function make this bit
w/r.

for the below device:
"
01:08.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
        Subsystem: Device 4348:3253
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at e010 [size=8]
        Region 1: I/O ports at e000 [size=8]
        Kernel driver in use: serial
"
[Note: I haven't test this patch, because I can't
access the hardware now, but it should be right]

Signed-off-by: Wang YanQing <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c 
b/drivers/tty/serial/8250/8250_pci.c
index ebcc362..be45d39 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1557,6 +1557,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH353_4S     0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF  0x5046
 #define PCI_DEVICE_ID_WCH_CH353_2S1P   0x7053
+#define PCI_DEVICE_ID_WCH_CH352_2S     0x3253
 #define PCI_VENDOR_ID_AGESTAR          0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375     0x6872
 #define PCI_VENDOR_ID_ASIX             0x9710
@@ -2180,6 +2181,14 @@ static struct pci_serial_quirk pci_serial_quirks[] 
__refdata = {
                .subdevice      = PCI_ANY_ID,
                .setup          = pci_wch_ch353_setup,
        },
+       /* WCH CH352 2S card (16550 clone) */
+       {
+               .vendor         = PCI_VENDOR_ID_WCH,
+               .device         = PCI_DEVICE_ID_WCH_CH352_2S,
+               .subvendor      = PCI_ANY_ID,
+               .subdevice      = PCI_ANY_ID,
+               .setup          = pci_wch_ch353_setup,
+       },
        /*
         * ASIX devices with FIFO bug
         */
@@ -4873,6 +4882,10 @@ static struct pci_device_id serial_pci_tbl[] = {
                PCI_ANY_ID, PCI_ANY_ID,
                0, 0, pbn_b0_bt_2_115200 },
 
+       {       PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+               PCI_ANY_ID, PCI_ANY_ID,
+               0, 0, pbn_b0_bt_2_115200 },
+
        /*
         * Commtech, Inc. Fastcom adapters
         */
-- 
1.7.11.1.116.g8228a23
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to