Add transceiver notifier event handling to the ux500 driver to set vbus
on specific transceiver events.

Acked-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.balti...@linaro.org>
---
 drivers/usb/musb/ux500.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 5b742ba..55f24c6 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -98,6 +98,37 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
                musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
+static int musb_otg_notifications(struct notifier_block *nb,
+               unsigned long event, void *unused)
+{
+       struct musb *musb = container_of(nb, struct musb, nb);
+
+       dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
+                       event, otg_state_string(musb->xceiv->state));
+
+       switch (event) {
+       case USB_EVENT_ID:
+               dev_dbg(musb->controller, "ID GND\n");
+               ux500_musb_set_vbus(musb, 1);
+               break;
+       case USB_EVENT_VBUS:
+               dev_dbg(musb->controller, "VBUS Connect\n");
+               ux500_musb_set_vbus(musb, 0);
+               break;
+       case USB_EVENT_NONE:
+               dev_dbg(musb->controller, "VBUS Disconnect\n");
+               if (is_host_active(musb))
+                       ux500_musb_set_vbus(musb, 0);
+               else
+                       musb->xceiv->state = OTG_STATE_B_IDLE;
+               break;
+       default:
+               dev_dbg(musb->controller, "ID float\n");
+               return NOTIFY_DONE;
+       }
+       return NOTIFY_OK;
+}
+
 static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
 {
        unsigned long   flags;
@@ -120,12 +151,21 @@ static irqreturn_t ux500_musb_interrupt(int irq, void 
*__hci)
 
 static int ux500_musb_init(struct musb *musb)
 {
+       int status;
+
        musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
        if (IS_ERR_OR_NULL(musb->xceiv)) {
                pr_err("HS USB OTG: no transceiver configured\n");
                return -EPROBE_DEFER;
        }
 
+       musb->nb.notifier_call = musb_otg_notifications;
+       status = usb_register_notifier(musb->xceiv, &musb->nb);
+       if (status < 0) {
+               dev_dbg(musb->controller, "notification register failed\n");
+               return status;
+       }
+
        musb->isr = ux500_musb_interrupt;
 
        return 0;
@@ -133,6 +173,8 @@ static int ux500_musb_init(struct musb *musb)
 
 static int ux500_musb_exit(struct musb *musb)
 {
+       usb_unregister_notifier(musb->xceiv, &musb->nb);
+
        usb_put_phy(musb->xceiv);
 
        return 0;
-- 
1.8.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to