The no_console_suspend option allows the console to write to the UART
during early resume, before the serial port itself is resumed. Such
writes hang indefinitely waiting for TX ready.
This adds a check to the console putchar function to drop characters
instead of hanging if the port hasn't been initialized. That way, we
can use no_console_suspend without risk of hanging.
Signed-off-by: Michael Spang <sp...@chromium.org>
---
drivers/tty/serial/samsung.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 161a7a0..ca04901 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1363,6 +1363,13 @@ s3c24xx_serial_console_txrdy(struct uart_port *port,
unsigned int ufcon)
return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
}
+static bool
+s3c24xx_port_configured(unsigned int ucon)
+{
+ /* consider the serial port configured if the tx/rx mode set */
+ return (ucon & 0xf) != 0;
+}
+
#ifdef CONFIG_CONSOLE_POLL
/*
* Console polling routines for writing and reading from the uart while
@@ -1385,6 +1392,11 @@ static void s3c24xx_serial_put_poll_char(struct
uart_port *port,
unsigned char c)
{
unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
@@ -1397,6 +1409,12 @@ static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
+
while (!s3c24xx_serial_console_txrdy(port, ufcon))
barrier();
wr_regb(cons_uart, S3C2410_UTXH, ch);
@@ -1429,9 +1447,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int
*baud,
"registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
port, ulcon, ucon, ubrdiv);
- if ((ucon & 0xf) != 0) {
- /* consider the serial port configured if the tx/rx mode set */
-
+ if (s3c24xx_port_configured(ucon)) {
switch (ulcon & S3C2410_LCON_CSMASK) {
case S3C2410_LCON_CS5:
*bits = 5;
--
1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
