From: Matt Kilgore <mattkilgor...@gmail.com>
Fixed coding style issues with comments, braces, and spacing.
Signed-off-by: Matt Kilgore <mattkilgor...@gmail.com>
---
drivers/staging/rtl8187se/r8180.h | 657 +++++++++++++++++++-------------------
1 file changed, 325 insertions(+), 332 deletions(-)
diff --git a/drivers/staging/rtl8187se/r8180.h
b/drivers/staging/rtl8187se/r8180.h
index 70ea414..d82903c 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -1,19 +1,19 @@
/*
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004-2005 <andrea...@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver
-
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
- We want to thanks the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
+ * This is part of rtl8180 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004-2005 <andrea...@tiscali.it>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official realtek driver
+ *
+ * Parts of this driver are based on the rtl8180 driver skeleton
+ * from Patric Schenke & Andres Salomon
+ *
+ * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+ *
+ * We want to thanks the Authors of those projects and the Ndiswrapper
+ * project Authors.
+ */
#ifndef R8180H
#define R8180H
@@ -21,13 +21,13 @@
#include <linux/interrupt.h>
#define RTL8180_MODULE_NAME "r8180"
-#define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n",
## a)
-#define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n",
## a)
+#define DMESG(x, a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
+#define DMESGW(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x
"\n", ## a)
+#define DMESGE(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x
"\n", ## a)
#include <linux/module.h>
#include <linux/kernel.h>
-//#include <linux/config.h>
+/*#include <linux/config.h>*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
@@ -37,19 +37,19 @@
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
-#include <linux/rtnetlink.h> //for rtnl_lock()
+#include <linux/rtnetlink.h> /*for rtnl_lock()*/
#include <linux/wireless.h>
#include <linux/timer.h>
-#include <linux/proc_fs.h> // Necessary because we use the proc fs
+#include <linux/proc_fs.h> /* Necessary because we use the proc fs*/
#include <linux/if_arp.h>
#include "ieee80211/ieee80211.h"
#include <asm/io.h>
-//#include <asm/semaphore.h>
+/*#include <asm/semaphore.h>*/
#define EPROM_93c46 0
#define EPROM_93c56 1
-#define RTL_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30
+#define RTL_IOCTL_WPA_SUPPLICANT (SIOCIWFIRSTPRIV+30)
#define DEFAULT_FRAG_THRESHOLD 2342U
#define MIN_FRAG_THRESHOLD 256U
@@ -61,13 +61,13 @@
#define DEFAULT_RETRY_RTS 7
#define DEFAULT_RETRY_DATA 7
-#define BEACON_QUEUE 6
+#define BEACON_QUEUE 6
-#define aSifsTime 10
+#define aSifsTime 10
#define sCrcLng 4
-#define sAckCtsLng 112 // bits in ACK and CTS frames
-//+by amy 080312
+#define sAckCtsLng 112 /* bits in ACK and CTS frames*/
+/*+by amy 080312*/
#define RATE_ADAPTIVE_TIMER_PERIOD 300
typedef enum _WIRELESS_MODE {
@@ -78,71 +78,68 @@ typedef enum _WIRELESS_MODE {
WIRELESS_MODE_AUTO = 0x08,
} WIRELESS_MODE;
-typedef struct ChnlAccessSetting {
+typedef struct ChnlAccessSetting {
u16 SIFS_Timer;
u16 DIFS_Timer;
u16 SlotTimeTimer;
u16 EIFS_Timer;
u16 CWminIndex;
u16 CWmaxIndex;
-}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
+} *PCHANNEL_ACCESS_SETTING, CHANNEL_ACCESS_SETTING;
-typedef enum{
- NIC_8185 = 1,
- NIC_8185B
- } nic_t;
+typedef enum {
+ NIC_8185 = 1,
+ NIC_8185B
+} nic_t;
typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be
used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
-
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
+#define AC0_BE 0 /* ACI: 0x00 // Best Effort */
+#define AC1_BK 1 /* ACI: 0x01 // Background */
+#define AC2_VI 2 /* ACI: 0x10 // Video */
+#define AC3_VO 3 /* ACI: 0x11 // Voice */
+#define AC_MAX 4 /* Max: define total number; Should not to be used as a
real enum. */
+
+/*
+ * ECWmin/ECWmax field.
+ * Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
+ */
+typedef union _ECW {
+ u8 charData;
+ struct {
+ u8 ECWmin:4;
+ u8 ECWmax:4;
+ } f; /* Field */
+} ECW, *PECW;
+
+/*
+ * ACI/AIFSN Field.
+ * Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+ */
+typedef union _ACI_AIFSN {
+ u8 charData;
+
+ struct {
+ u8 AIFSN:4;
+ u8 ACM:1;
+ u8 ACI:2;
+ u8 Reserved:1;
+ } f; /* Field */
+} ACI_AIFSN, *PACI_AIFSN;
+
+/*
+ * AC Parameters Record Format.
+ * Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
+ */
+typedef union _AC_PARAM {
+ u32 longData;
+ u8 charData[4];
+
+ struct {
ACI_AIFSN AciAifsn;
ECW Ecw;
u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
+ } f; /* Field */
+} AC_PARAM, *PAC_PARAM;
/* it is a wrong definition. -xiong-2006-11-17
typedef struct ThreeWireReg {
@@ -156,37 +153,35 @@ typedef struct ThreeWireReg {
} ThreeWireReg;
*/
-typedef union _ThreeWire{
- struct _ThreeWireStruc{
- u16 data:1;
- u16 clk:1;
- u16 enableB:1;
- u16 read_write:1;
- u16 resv1:12;
-// u2Byte resv2:14;
-// u2Byte ThreeWireEnable:1;
-// u2Byte resv3:1;
- }struc;
- u16 longData;
-}ThreeWireReg;
-
-
-typedef struct buffer
-{
+typedef union _ThreeWire {
+ struct _ThreeWireStruc {
+ u16 data:1;
+ u16 clk:1;
+ u16 enableB:1;
+ u16 read_write:1;
+ u16 resv1:12;
+/* u2Byte resv2:14; */
+/* u2Byte ThreeWireEnable:1; */
+/* u2Byte resv3:1; */
+ } struc;
+ u16 longData;
+} ThreeWireReg;
+
+
+typedef struct buffer {
struct buffer *next;
u32 *buf;
dma_addr_t dma;
} buffer;
-//YJ,modified,080828
-typedef struct Stats
-{
+/* YJ,modified,080828 */
+typedef struct Stats {
unsigned long txrdu;
unsigned long rxrdu;
unsigned long rxnolast;
unsigned long rxnodata;
-// unsigned long rxreset;
-// unsigned long rxwrkaround;
+/* unsigned long rxwrkaround; */
+/* unsigned long rxwrkaround; */
unsigned long rxnopointer;
unsigned long txnperr;
unsigned long txresumed;
@@ -208,52 +203,52 @@ typedef struct Stats
unsigned long txbeaconerr;
unsigned long txlpokint;
unsigned long txlperr;
- unsigned long txretry;//retry number tony 20060601
- unsigned long rxcrcerrmin;//crc error (0-500)
- unsigned long rxcrcerrmid;//crc error (500-1000)
- unsigned long rxcrcerrmax;//crc error (>1000)
- unsigned long rxicverr;//ICV error
+ unsigned long txretry;/*retry number tony 20060601 */
+ unsigned long rxcrcerrmin;/*crc error (0-500) */
+ unsigned long rxcrcerrmid;/*crc error (500-1000) */
+ unsigned long rxcrcerrmax;/*crc error (>1000) */
+ unsigned long rxicverr;/*ICV error */
} Stats;
#define MAX_LD_SLOT_NUM 10
-#define KEEP_ALIVE_INTERVAL 20 // in seconds.
-#define CHECK_FOR_HANG_PERIOD 2 //be equal to watchdog check
time
-#define DEFAULT_KEEP_ALIVE_LEVEL 1
-#define DEFAULT_SLOT_NUM 2
-#define POWER_PROFILE_AC 0
-#define POWER_PROFILE_BATTERY 1
-
-typedef struct _link_detect_t
-{
- u32 RxFrameNum[MAX_LD_SLOT_NUM]; //
number of Rx Frame / CheckForHang_period to determine link status
- u16 SlotNum; // number of
CheckForHang period to determine link status, default is 2
- u16 SlotIndex;
-
- u32 NumTxOkInPeriod; //number of packet
transmitted during CheckForHang
- u32 NumRxOkInPeriod; //number of packet
received during CheckForHang
-
- u8 IdleCount; // (KEEP_ALIVE_INTERVAL
/ CHECK_FOR_HANG_PERIOD)
- u32 LastNumTxUnicast;
- u32 LastNumRxUnicast;
-
- bool bBusyTraffic; //when it is set to 1,
UI cann't scan at will.
-}link_detect_t, *plink_detect_t;
-
-//YJ,modified,080828,end
-
-//by amy for led
-//================================================================================
-// LED customization.
-//================================================================================
-
-typedef enum _LED_STRATEGY_8185{
- SW_LED_MODE0, //
- SW_LED_MODE1, //
- HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different
control modes)
-}LED_STRATEGY_8185, *PLED_STRATEGY_8185;
-//by amy for led
-//by amy for power save
-typedef enum _LED_CTL_MODE{
+#define KEEP_ALIVE_INTERVAL 20 /* in seconds.*/
+#define CHECK_FOR_HANG_PERIOD 2 /*be equal to watchdog check time */
+#define DEFAULT_KEEP_ALIVE_LEVEL 1
+#define DEFAULT_SLOT_NUM 2
+#define POWER_PROFILE_AC 0
+#define POWER_PROFILE_BATTERY 1
+
+typedef struct _link_detect_t {
+ u32 RxFrameNum[MAX_LD_SLOT_NUM]; /* number of Rx Frame /
CheckForHang_period to determine link status */
+ u16 SlotNum; /* number of CheckForHang period to determine
link status, default is 2 */
+ u16 SlotIndex;
+
+ u32 NumTxOkInPeriod; /*number of packet transmitted during
CheckForHang */
+ u32 NumRxOkInPeriod; /*number of packet received during
CheckForHang */
+
+ u8 IdleCount; /* (KEEP_ALIVE_INTERVAL / CHECK_FOR_HANG_PERIOD)
*/
+ u32 LastNumTxUnicast;
+ u32 LastNumRxUnicast;
+
+ bool bBusyTraffic; /*when it is set to 1, UI cann't scan at will.
*/
+} link_detect_t, *plink_detect_t;
+
+/*YJ,modified,080828,end */
+
+/*by amy for led
+
*==============================================================================
+ * LED customization.
+
*==============================================================================
+ */
+typedef enum _LED_STRATEGY_8185 {
+ SW_LED_MODE0,
+ SW_LED_MODE1,
+ HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different
control modes) */
+} LED_STRATEGY_8185, *PLED_STRATEGY_8185;
+/*by amy for led
+ *by amy for power save
+ */
+typedef enum _LED_CTL_MODE {
LED_CTL_POWER_ON = 1,
LED_CTL_LINK = 2,
LED_CTL_NO_LINK = 3,
@@ -261,73 +256,70 @@ typedef enum _LED_CTL_MODE{
LED_CTL_RX = 5,
LED_CTL_SITE_SURVEY = 6,
LED_CTL_POWER_OFF = 7
-}LED_CTL_MODE;
+} LED_CTL_MODE;
-typedef enum _RT_RF_POWER_STATE
-{
+typedef enum _RT_RF_POWER_STATE {
eRfOn,
eRfSleep,
eRfOff
-}RT_RF_POWER_STATE;
+} RT_RF_POWER_STATE;
-enum _ReasonCode{
+enum _ReasonCode {
unspec_reason = 0x1,
auth_not_valid = 0x2,
deauth_lv_ss = 0x3,
- inactivity = 0x4,
- ap_overload = 0x5,
- class2_err = 0x6,
- class3_err = 0x7,
- disas_lv_ss = 0x8,
+ inactivity = 0x4,
+ ap_overload = 0x5,
+ class2_err = 0x6,
+ class3_err = 0x7,
+ disas_lv_ss = 0x8,
asoc_not_auth = 0x9,
- //----MIC_CHECK
- mic_failure = 0xe,
- //----END MIC_CHECK
+ /*----MIC_CHECK */
+ mic_failure = 0xe,
+ /*----END MIC_CHECK */
- // Reason code defined in 802.11i D10.0 p.28.
- invalid_IE = 0x0d,
+ /* Reason code defined in 802.11i D10.0 p.28. */
+ invalid_IE = 0x0d,
four_way_tmout = 0x0f,
two_way_tmout = 0x10,
- IE_dismatch = 0x11,
+ IE_dismatch = 0x11,
invalid_Gcipher = 0x12,
invalid_Pcipher = 0x13,
invalid_AKMP = 0x14,
- unsup_RSNIEver = 0x15,
+ unsup_RSNIEver = 0x15,
invalid_RSNIE = 0x16,
- auth_802_1x_fail= 0x17,
- ciper_reject = 0x18,
-
- // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie,
2005-11-15.
- QoS_unspec = 0x20, // 32
- QAP_bandwidth = 0x21, // 33
- poor_condition = 0x22, // 34
- no_facility = 0x23, // 35
- // Where is 36???
- req_declined = 0x25, // 37
- invalid_param = 0x26, // 38
- req_not_honored= 0x27, // 39
- TS_not_created = 0x2F, // 47
- DL_not_allowed = 0x30, // 48
- dest_not_exist = 0x31, // 49
- dest_not_QSTA = 0x32, // 50
+ auth_802_1x_fail = 0x17,
+ ciper_reject = 0x18,
+
+ /* Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie,
2005-11-15. */
+ QoS_unspec = 0x20, /* 32 */
+ QAP_bandwidth = 0x21, /* 33 */
+ poor_condition = 0x22, /* 34 */
+ no_facility = 0x23, /* 35 */
+ /* Where is 36??? */
+ req_declined = 0x25, /* 37 */
+ invalid_param = 0x26, /* 38 */
+ req_not_honored = 0x27, /* 39 */
+ TS_not_created = 0x2F, /* 47 */
+ DL_not_allowed = 0x30, /* 48 */
+ dest_not_exist = 0x31, /* 49 */
+ dest_not_QSTA = 0x32, /* 50 */
};
-typedef enum _RT_PS_MODE
-{
- eActive, // Active/Continuous access.
- eMaxPs, // Max power save mode.
- eFastPs // Fast power save mode.
-}RT_PS_MODE;
-//by amy for power save
-typedef struct r8180_priv
-{
+typedef enum _RT_PS_MODE {
+ eActive, /* Active/Continuous access. */
+ eMaxPs, /* Max power save mode. */
+ eFastPs /* Fast power save mode. */
+} RT_PS_MODE;
+/*by amy for power save */
+typedef struct r8180_priv {
struct pci_dev *pdev;
short epromtype;
int irq;
struct ieee80211_device *ieee80211;
- short plcp_preamble_mode; // 0:auto 1:short 2:long
+ short plcp_preamble_mode; /* 0:auto 1:short 2:long */
spinlock_t irq_th_lock;
spinlock_t tx_lock;
@@ -340,19 +332,19 @@ typedef struct r8180_priv
short chan;
short sens;
short max_sens;
- u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
- u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
- //u8 challow[15]; //channels from 1 to 14, 0 not used
- u8 channel_plan; // it's the channel plan index
+ u8 chtxpwr[15]; /*channels from 1 to 14, 0 not used */
+ u8 chtxpwr_ofdm[15]; /*channels from 1 to 14, 0 not used */
+ /*u8 challow[15]; //channels from 1 to 14, 0 not used */
+ u8 channel_plan; /* it's the channel plan index */
short up;
- short crcmon; //if 1 allow bad crc frame reception in monitor mode
+ short crcmon; /*if 1 allow bad crc frame reception in monitor mode */
struct timer_list scan_timer;
/*short scanpending;
short stopscan;*/
spinlock_t scan_lock;
u8 active_probe;
- //u8 active_scan_num;
+ /*u8 active_scan_num; */
struct semaphore wx_sem;
short hw_wep;
@@ -360,17 +352,17 @@ typedef struct r8180_priv
short antb;
short diversity;
u32 key0[4];
- short (*rf_set_sens)(struct net_device *dev,short sens);
- void (*rf_set_chan)(struct net_device *dev,short ch);
+ short (*rf_set_sens)(struct net_device *dev, short sens);
+ void (*rf_set_chan)(struct net_device *dev, short ch);
void (*rf_close)(struct net_device *dev);
void (*rf_init)(struct net_device *dev);
void (*rf_sleep)(struct net_device *dev);
void (*rf_wakeup)(struct net_device *dev);
- //short rate;
+ /*short rate; */
short promisc;
/*stats*/
struct Stats stats;
- struct _link_detect_t link_detect; //YJ,add,080828
+ struct _link_detect_t link_detect; /* YJ,add,080828 */
struct iw_statistics wstats;
struct proc_dir_entry *dir_dev;
@@ -449,11 +441,11 @@ typedef struct r8180_priv
int txringcount;
int txbuffsize;
- //struct tx_pendingbuf txnp_pending;
- //struct tasklet_struct irq_tx_tasklet;
+ /*struct tx_pendingbuf txnp_pending; */
+ /*struct tasklet_struct irq_tx_tasklet; */
struct tasklet_struct irq_rx_tasklet;
u8 dma_poll_mask;
- //short tx_suspend;
+ /*short tx_suspend; */
/* adhoc/master mode stuff */
u32 *txbeaconringtail;
@@ -462,158 +454,159 @@ typedef struct r8180_priv
int txbeaconcount;
struct buffer *txbeaconbufs;
struct buffer *txbeaconbufstail;
- //char *master_essid;
- //u16 master_beaconinterval;
- //u32 master_beaconsize;
- //u16 beacon_interval;
+ /*char *master_essid; */
+ /*u16 master_beaconinterval; */
+ /*u32 master_beaconsize; */
+ /*u16 beacon_interval; */
u8 retry_data;
u8 retry_rts;
u16 rts;
-//by amy for led
+ /*by amy for led */
LED_STRATEGY_8185 LedStrategy;
-//by amy for led
+ /*by amy for led */
-//by amy for power save
+ /*by amy for power save */
struct timer_list watch_dog_timer;
bool bInactivePs;
bool bSwRfProcessing;
RT_RF_POWER_STATE eInactivePowerState;
RT_RF_POWER_STATE eRFPowerState;
- u32 RfOffReason;
+ u32 RfOffReason;
bool RFChangeInProgress;
bool SetRFPowerStateInProgress;
u8 RFProgType;
bool bLeisurePs;
RT_PS_MODE dot11PowerSaveMode;
- //u32 NumRxOkInPeriod; //YJ,del,080828
- //u32 NumTxOkInPeriod; //YJ,del,080828
- u8 TxPollingTimes;
+ /*u32 NumRxOkInPeriod; //YJ,del,080828 */
+ /*u32 NumTxOkInPeriod; //YJ,del,080828 */
+ u8 TxPollingTimes;
- bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will
keep eAwake until receive data or timeout.
+ bool bApBufOurFrame; /* TRUE if AP buffer our unicast data , we will
keep eAwake until receive data or timeout. */
u8 WaitBufDataBcnCount;
u8 WaitBufDataTimeOut;
-//by amy for power save
-//by amy for antenna
- u8 EEPROMSwAntennaDiversity;
+ /*by amy for power save */
+ /*by amy for antenna */
+ u8 EEPROMSwAntennaDiversity;
bool EEPROMDefaultAntenna1;
- u8 RegSwAntennaDiversityMechanism;
+ u8 RegSwAntennaDiversityMechanism;
bool bSwAntennaDiverity;
- u8 RegDefaultAntenna;
+ u8 RegDefaultAntenna;
bool bDefaultAntenna1;
- u8 SignalStrength;
+ u8 SignalStrength;
long Stats_SignalStrength;
- long LastSignalStrengthInPercent; // In percentage, used for smoothing,
e.g. Moving Average.
- u8 SignalQuality; // in 0-100 index.
+ long LastSignalStrengthInPercent; /* In percentage, used for smoothing,
e.g. Moving Average. */
+ u8 SignalQuality; /* in 0-100 index. */
long Stats_SignalQuality;
- long RecvSignalPower; // in dBm.
+ long RecvSignalPower; /* in dBm. */
long Stats_RecvSignalPower;
- u8 LastRxPktAntenna; // +by amy 080312 Antenna which
received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
+ u8 LastRxPktAntenna; /* +by amy 080312 Antenna which
received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. */
u32 AdRxOkCnt;
long AdRxSignalStrength;
- u8 CurrAntennaIndex; // Index to current Antenna
(both Tx and Rx).
- u8 AdTickCount; // Times of
SwAntennaDiversityTimer happened.
- u8 AdCheckPeriod; // # of period
SwAntennaDiversityTimer to check Rx signal strength for SW Antenna Diversity.
- u8 AdMinCheckPeriod; // Min value of AdCheckPeriod.
- u8 AdMaxCheckPeriod; // Max value of AdCheckPeriod.
- long AdRxSsThreshold; // Signal strength threshold to
switch antenna.
- long AdMaxRxSsThreshold; // Max value of
AdRxSsThreshold.
- bool bAdSwitchedChecking; // TRUE if we shall shall check
Rx signal strength for last time switching antenna.
- long AdRxSsBeforeSwitched; // Rx signal strength before we
switched antenna.
+ u8 CurrAntennaIndex; /* Index to current Antenna
(both Tx and Rx). */
+ u8 AdTickCount; /* Times of
SwAntennaDiversityTimer happened. */
+ u8 AdCheckPeriod; /* # of period
SwAntennaDiversityTimer to check Rx signal strength for SW Antenna Diversity. */
+ u8 AdMinCheckPeriod; /* Min value of AdCheckPeriod.
*/
+ u8 AdMaxCheckPeriod; /* Max value of AdCheckPeriod.
*/
+ long AdRxSsThreshold; /* Signal strength threshold to
switch antenna. */
+ long AdMaxRxSsThreshold; /* Max value of
AdRxSsThreshold. */
+ bool bAdSwitchedChecking; /* TRUE if we shall shall check
Rx signal strength for last time switching antenna.*/
+ long AdRxSsBeforeSwitched; /* Rx signal strength before we
switched antenna. */
struct timer_list SwAntennaDiversityTimer;
-//by amy for antenna
-//{by amy 080312
-//
- // Crystal calibration.
- // Added by Roger, 2007.12.11.
- //
- bool bXtalCalibration; // Crystal calibration.
- u8 XtalCal_Xin; // Crystal calibration for Xin.
0~7.5pF
- u8 XtalCal_Xout; // Crystal calibration for Xout.
0~7.5pF
- //
- // Tx power tracking with thermal meter indication.
- // Added by Roger, 2007.12.11.
- //
- bool bTxPowerTrack; // Tx Power tracking.
- u8 ThermalMeter; // Thermal meter reference
indication.
- //
- // Dynamic Initial Gain Adjustment Mechanism. Added by Bruce,
2007-02-14.
- //
- bool bDigMechanism; // TRUE if DIG is
enabled, FALSE ow.
- bool bRegHighPowerMechanism; // For High
Power Mechanism. 061010, by rcnjko.
- u32 FalseAlarmRegValue;
- u8 RegDigOfdmFaUpTh; // Upper
threshold of OFDM false alarm, which is used in DIG.
- u8 DIG_NumberFallbackVote;
- u8 DIG_NumberUpgradeVote;
- // For HW antenna diversity, added by Roger, 2008.01.30.
- u32 AdMainAntennaRxOkCnt; // Main antenna
Rx OK count.
- u32 AdAuxAntennaRxOkCnt; // Aux antenna
Rx OK count.
- bool bHWAdSwitched; // TRUE if we
has switched default antenna by HW evaluation.
- // RF High Power upper/lower threshold.
- u8 RegHiPwrUpperTh;
- u8 RegHiPwrLowerTh;
- // RF RSSI High Power upper/lower Threshold.
- u8 RegRSSIHiPwrUpperTh;
- u8 RegRSSIHiPwrLowerTh;
- // Current CCK RSSI value to determine CCK high power, asked by SD3 DZ,
by Bruce, 2007-04-12.
- u8 CurCCKRSSI;
- bool bCurCCKPkt;
- //
- // High Power Mechanism. Added by amy, 080312.
- //
- bool bToUpdateTxPwr;
- long UndecoratedSmoothedSS;
- long UndercorateSmoothedRxPower;
- u8 RSSI;
- char RxPower;
- u8 InitialGain;
- //For adjust Dig Threshold during Legacy/Leisure Power Save Mode
- u32 DozePeriodInPast2Sec;
- // Don't access BB/RF under disable PLL situation.
- u8 InitialGainBackUp;
- u8 RegBModeGainStage;
-//by amy for rate adaptive
- struct timer_list rateadapter_timer;
- u32 RateAdaptivePeriod;
- bool bEnhanceTxPwr;
- bool bUpdateARFR;
- int ForcedDataRate; // Force Data Rate. 0: Auto, 0x02: 1M ~
0x6C: 54M.)
- u32 NumTxUnicast; //YJ,add,080828,for keep alive
- u8 keepAliveLevel; //YJ,add,080828,for KeepAlive
- unsigned long NumTxOkTotal;
- u16 LastRetryCnt;
- u16 LastRetryRate;
- unsigned long LastTxokCnt;
- unsigned long LastRxokCnt;
- u16 CurrRetryCnt;
- unsigned long LastTxOKBytes;
- unsigned long NumTxOkBytesTotal;
- u8 LastFailTxRate;
- long LastFailTxRateSS;
- u8 FailTxRateCount;
- u32 LastTxThroughput;
- //for up rate
- unsigned short bTryuping;
- u8 CurrTxRate; //the rate
before up
- u16 CurrRetryRate;
- u16 TryupingCount;
- u8 TryDownCountLowData;
- u8 TryupingCountNoData;
-
- u8 CurrentOperaRate;
-//by amy for rate adaptive
-//by amy 080312}
-// short wq_hurryup;
-// struct workqueue_struct *workqueue;
+ /*by amy for antenna
+ *{by amy 080312
+ *
+ * Crystal calibration.
+ * Added by Roger, 2007.12.11.
+ */
+ bool bXtalCalibration; /* Crystal calibration. */
+ u8 XtalCal_Xin; /* Crystal calibration for Xin. 0~7.5pF */
+ u8 XtalCal_Xout; /* Crystal calibration for Xout. 0~7.5pF */
+ /*
+ * Tx power tracking with thermal meter indication.
+ * Added by Roger, 2007.12.11.
+ */
+ bool bTxPowerTrack; /* Tx Power tracking. */
+ u8 ThermalMeter; /* Thermal meter reference indication. */
+ /*
+ * Dynamic Initial Gain Adjustment Mechanism. Added by Bruce,
2007-02-14.
+ */
+ bool bDigMechanism; /* TRUE if DIG is enabled, FALSE ow. */
+ bool bRegHighPowerMechanism; /* For High Power Mechanism. 061010, by
rcnjko. */
+ u32 FalseAlarmRegValue;
+ u8 RegDigOfdmFaUpTh; /* Upper threshold of OFDM false alarm, which
is used in DIG. */
+ u8 DIG_NumberFallbackVote;
+ u8 DIG_NumberUpgradeVote;
+ /* For HW antenna diversity, added by Roger, 2008.01.30. */
+ u32 AdMainAntennaRxOkCnt; /* Main antenna Rx OK count. */
+ u32 AdAuxAntennaRxOkCnt; /* Aux antenna Rx OK count. */
+ bool bHWAdSwitched; /* TRUE if we has switched
default antenna by HW evaluation. */
+ /* RF High Power upper/lower threshold. */
+ u8 RegHiPwrUpperTh;
+ u8 RegHiPwrLowerTh;
+ /* RF RSSI High Power upper/lower Threshold. */
+ u8 RegRSSIHiPwrUpperTh;
+ u8 RegRSSIHiPwrLowerTh;
+ /* Current CCK RSSI value to determine CCK high power, asked by SD3 DZ,
by Bruce, 2007-04-12. */
+ u8 CurCCKRSSI;
+ bool bCurCCKPkt;
+ /*
+ * High Power Mechanism. Added by amy, 080312.
+ */
+ bool bToUpdateTxPwr;
+ long UndecoratedSmoothedSS;
+ long UndercorateSmoothedRxPower;
+ u8 RSSI;
+ char RxPower;
+ u8 InitialGain;
+ /* For adjust Dig Threshold during Legacy/Leisure Power Save Mode */
+ u32 DozePeriodInPast2Sec;
+ /* Don't access BB/RF under disable PLL situation. */
+ u8 InitialGainBackUp;
+ u8 RegBModeGainStage;
+ /*by amy for rate adaptive */
+ struct timer_list rateadapter_timer;
+ u32 RateAdaptivePeriod;
+ bool bEnhanceTxPwr;
+ bool bUpdateARFR;
+ int ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C:
54M.) */
+ u32 NumTxUnicast; /* YJ,add,080828,for keep alive */
+ u8 keepAliveLevel; /* YJ,add,080828,for KeepAlive */
+ unsigned long NumTxOkTotal;
+ u16 LastRetryCnt;
+ u16 LastRetryRate;
+ unsigned long LastTxokCnt;
+ unsigned long LastRxokCnt;
+ u16 CurrRetryCnt;
+ unsigned long LastTxOKBytes;
+ unsigned long NumTxOkBytesTotal;
+ u8 LastFailTxRate;
+ long LastFailTxRateSS;
+ u8 FailTxRateCount;
+ u32 LastTxThroughput;
+ /*for up rate */
+ unsigned short bTryuping;
+ u8 CurrTxRate; /*the rate before up */
+ u16 CurrRetryRate;
+ u16 TryupingCount;
+ u8 TryDownCountLowData;
+ u8 TryupingCountNoData;
+
+ u8 CurrentOperaRate;
+ /*by amy for rate adaptive
+ *by amy 080312}
+ * short wq_hurryup;
+ * struct workqueue_struct *workqueue;
+ */
struct work_struct reset_wq;
struct work_struct watch_dog_wq;
short ack_tx_to_ieee;
u8 dma_poll_stop_mask;
- //u8 RegThreeWireMode;
+ /*u8 RegThreeWireMode; */
u16 ShortRetryLimit;
u16 LongRetryLimit;
u16 EarlyRxThreshold;
@@ -621,8 +614,8 @@ typedef struct r8180_priv
u32 ReceiveConfig;
u32 IntrMask;
- struct ChnlAccessSetting ChannelAccessSetting;
-}r8180_priv;
+ struct ChnlAccessSetting ChannelAccessSetting;
+} r8180_priv;
#define MANAGE_PRIORITY 0
#define BK_PRIORITY 1
@@ -634,26 +627,26 @@ typedef struct r8180_priv
#define LOW_PRIORITY VI_PRIORITY
#define NORM_PRIORITY VO_PRIORITY
-//AC2Queue mapping
+/*AC2Queue mapping */
#define AC2Q(_ac) (((_ac) == WME_AC_VO) ? VO_PRIORITY : \
((_ac) == WME_AC_VI) ? VI_PRIORITY : \
((_ac) == WME_AC_BK) ? BK_PRIORITY : \
BE_PRIORITY)
-short rtl8180_tx(struct net_device *dev,u8* skbuf, int len,int priority,
- short morefrag,short fragdesc,int rate);
+short rtl8180_tx(struct net_device *dev, u8 *skbuf, int len, int priority,
+ short morefrag, short fragdesc, int rate);
u8 read_nic_byte(struct net_device *dev, int x);
u32 read_nic_dword(struct net_device *dev, int x);
u16 read_nic_word(struct net_device *dev, int x) ;
-void write_nic_byte(struct net_device *dev, int x,u8 y);
-void write_nic_word(struct net_device *dev, int x,u16 y);
-void write_nic_dword(struct net_device *dev, int x,u32 y);
+void write_nic_byte(struct net_device *dev, int x, u8 y);
+void write_nic_word(struct net_device *dev, int x, u16 y);
+void write_nic_dword(struct net_device *dev, int x, u32 y);
void force_pci_posting(struct net_device *dev);
void rtl8180_rtx_disable(struct net_device *);
-void rtl8180_set_anaparam(struct net_device *dev,u32 a);
-void rtl8185_set_anaparam2(struct net_device *dev,u32 a);
+void rtl8180_set_anaparam(struct net_device *dev, u32 a);
+void rtl8185_set_anaparam2(struct net_device *dev, u32 a);
void rtl8180_set_hw_wep(struct net_device *dev);
void rtl8180_no_hw_wep(struct net_device *dev);
void rtl8180_update_msr(struct net_device *dev);
@@ -662,7 +655,7 @@ void rtl8180_beacon_rx_disable(struct net_device *dev);
int rtl8180_down(struct net_device *dev);
int rtl8180_up(struct net_device *dev);
void rtl8180_commit(struct net_device *dev);
-void rtl8180_set_chan(struct net_device *dev,short ch);
+void rtl8180_set_chan(struct net_device *dev, short ch);
void write_phy(struct net_device *dev, u8 adr, u8 data);
void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
@@ -672,9 +665,9 @@ void IPSEnter(struct net_device *dev);
void IPSLeave(struct net_device *dev);
int get_curr_tx_free_desc(struct net_device *dev, int priority);
void UpdateInitialGain(struct net_device *dev);
-bool SetAntennaConfig87SE(struct net_device *dev, u8 DefaultAnt, bool
bAntDiversity);
+bool SetAntennaConfig87SE(struct net_device *dev, u8 DefaultAnt, bool
bAntDiversity);
-//#ifdef CONFIG_RTL8185B
+/*#ifdef CONFIG_RTL8185B */
void rtl8185b_adapter_start(struct net_device *dev);
void rtl8185b_rx_enable(struct net_device *dev);
void rtl8185b_tx_enable(struct net_device *dev);
@@ -683,8 +676,8 @@ void rtl8185b_irq_enable(struct net_device *dev);
void fix_rx_fifo(struct net_device *dev);
void fix_tx_fifo(struct net_device *dev);
void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch);
-void rtl8180_rate_adapter(struct work_struct * work);
-//#endif
+void rtl8180_rate_adapter(struct work_struct *work);
+/*#endif */
bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet,
u32 ChangeSource);
#endif
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
