On Mon, 27 May 2013, Gabriel Fernandez wrote:
> From: Gabriel Fernandez <[email protected]>
>
> This patch configures pin map in device tree of i2c0,
> 1,2,4 & 5 for ccu8540 board.
>
> Signed-off-by: Gabriel Fernandez <[email protected]>
> ---
> arch/arm/boot/dts/ccu8540-pinctrl.dtsi | 115
> +++++++++++++++++++++++++++++++++
Okay, I'm starting to see the justification of this seperate file now.
> arch/arm/boot/dts/ccu8540.dts | 30 +++++++++
> 2 files changed, 145 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
> b/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
> index 26e718b..57e8165 100644
> --- a/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
> @@ -74,4 +74,119 @@
> };
> };
> };
> +
> + i2c0 {
> + i2c0_default_mux: i2c_mux {
> + default_mux {
> + ste,function = "i2c0";
'stericsson'?
> + ste,pins = "i2c0_a_1";
> + };
> + };
> +
> + i2c0_default_mode: i2c_default {
> + default_cfg1 {
> + ste,pins = "GPIO147", "GPIO148";
> + ste,config = <&in_pu>;
> + };
> + };
> +
> + i2c0_sleep_mode: i2c_sleep {
> + sleep_cfg1 {
> + ste,pins = "GPIO147", "GPIO148";
> + ste,config = <&slpm_in_pu>;
> + };
> + };
> + };
> +
> + i2c1 {
> + i2c1_default_mux: i2c_mux {
> + default_mux {
> + ste,function = "i2c1";
> + ste,pins = "i2c1_b_2";
> + };
> + };
> +
> + i2c1_default_mode: i2c_default {
> + default_cfg1 {
> + ste,pins = "GPIO16", "GPIO17";
> + ste,config = <&in_pu>;
> + };
> + };
> +
> + i2c1_sleep_mode: i2c_sleep {
> + sleep_cfg1 {
> + ste,pins = "GPIO16", "GPIO17";
> + ste,config = <&slpm_in_pu>;
> + };
> + };
> + };
> +
> + i2c2 {
> + i2c2_default_mux: i2c_mux {
> + default_mux {
> + ste,function = "i2c2";
> + ste,pins = "i2c2_b_2";
> + };
> + };
> +
> + i2c2_default_mode: i2c_default {
> + default_cfg1 {
> + ste,pins = "GPIO10", "GPIO11";
> + ste,config = <&in_pu>;
> + };
> + };
> +
> + i2c2_sleep_mode: i2c_sleep {
> + sleep_cfg1 {
> + ste,pins = "GPIO11", "GPIO11";
> + ste,config = <&slpm_in_pu>;
> + };
> + };
> + };
> +
> + i2c4 {
> + i2c4_default_mux: i2c_mux {
> + default_mux {
> + ste,function = "i2c4";
> + ste,pins = "i2c4_b_2";
> + };
> + };
> +
> + i2c4_default_mode: i2c_default {
> + default_cfg1 {
> + ste,pins = "GPIO122", "GPIO123";
> + ste,config = <&in_pu>;
> + };
> + };
> +
> + i2c4_sleep_mode: i2c_sleep {
> + sleep_cfg1 {
> + ste,pins = "GPIO122", "GPIO123";
> + ste,config = <&slpm_in_pu>;
> + };
> + };
> + };
> +
> + i2c5 {
> + i2c5_default_mux: i2c_mux {
> + default_mux {
> + ste,function = "i2c5";
> + ste,pins = "i2c5_c_2";
> + };
> + };
> +
> + i2c5_default_mode: i2c_default {
> + default_cfg1 {
> + ste,pins = "GPIO118", "GPIO119";
> + ste,config = <&in_pu>;
> + };
> + };
> +
> + i2c5_sleep_mode: i2c_sleep {
> + sleep_cfg1 {
> + ste,pins = "GPIO118", "GPIO119";
> + ste,config = <&slpm_in_pu>;
> + };
> + };
> + };
> };
> diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
> index 4f93795..3e7142b 100644
> --- a/arch/arm/boot/dts/ccu8540.dts
> +++ b/arch/arm/boot/dts/ccu8540.dts
> @@ -44,5 +44,35 @@
> pinctrl-1 = <&uart2_sleep_mode>;
> status = "okay";
> };
> +
> + i2c0: i2c@80004000 {
> + pinctrl-names = "default","sleep";
Can you place a ' ' after the ','?
> + pinctrl-0 = <&i2c0_default_mux>,<&i2c0_default_mode>;
All the way down ...
> + pinctrl-1 = <&i2c0_sleep_mode>;
> + };
> +
> + i2c1: i2c@80122000 {
> + pinctrl-names = "default","sleep";
> + pinctrl-0 = <&i2c1_default_mux>,<&i2c1_default_mode>;
> + pinctrl-1 = <&i2c1_sleep_mode>;
> + };
> +
> + i2c2: i2c@80128000 {
> + pinctrl-names = "default","sleep";
> + pinctrl-0 = <&i2c2_default_mux>,<&i2c2_default_mode>;
> + pinctrl-1 = <&i2c2_sleep_mode>;
> + };
> +
> + i2c4: i2c@8012a000 {
> + pinctrl-names = "default","sleep";
> + pinctrl-0 = <&i2c4_default_mux>,<&i2c4_default_mode>;
> + pinctrl-1 = <&i2c4_sleep_mode>;
> + };
> +
> + i2c5: i2c@80001000 {
> + pinctrl-names = "default","sleep";
> + pinctrl-0 = <&i2c5_default_mux>,<&i2c5_default_mode>;
> + pinctrl-1 = <&i2c5_sleep_mode>;
> + };
> };
> };
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
