On 28 May 2013 12:12, Lee Jones <[email protected]> wrote:
> On Mon, 27 May 2013, Gabriel Fernandez wrote:
>
>> From: Gabriel Fernandez <[email protected]>
>>
>> This patch configures pin map in device tree of i2c0,
>> 1,2,4 & 5 for ccu8540 board.
>>
>> Signed-off-by: Gabriel Fernandez <[email protected]>
>> ---
>> arch/arm/boot/dts/ccu8540-pinctrl.dtsi | 115
>> +++++++++++++++++++++++++++++++++
>
> Okay, I'm starting to see the justification of this seperate file now.
>
>> arch/arm/boot/dts/ccu8540.dts | 30 +++++++++
>> 2 files changed, 145 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
>> b/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
>> index 26e718b..57e8165 100644
>> --- a/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/ccu8540-pinctrl.dtsi
>> @@ -74,4 +74,119 @@
>> };
>> };
>> };
>> +
>> + i2c0 {
>> + i2c0_default_mux: i2c_mux {
>> + default_mux {
>> + ste,function = "i2c0";
>
> 'stericsson'?
ditto
>
>> + ste,pins = "i2c0_a_1";
>> + };
>> + };
>> +
>> + i2c0_default_mode: i2c_default {
>> + default_cfg1 {
>> + ste,pins = "GPIO147", "GPIO148";
>> + ste,config = <&in_pu>;
>> + };
>> + };
>> +
>> + i2c0_sleep_mode: i2c_sleep {
>> + sleep_cfg1 {
>> + ste,pins = "GPIO147", "GPIO148";
>> + ste,config = <&slpm_in_pu>;
>> + };
>> + };
>> + };
>> +
>> + i2c1 {
>> + i2c1_default_mux: i2c_mux {
>> + default_mux {
>> + ste,function = "i2c1";
>> + ste,pins = "i2c1_b_2";
>> + };
>> + };
>> +
>> + i2c1_default_mode: i2c_default {
>> + default_cfg1 {
>> + ste,pins = "GPIO16", "GPIO17";
>> + ste,config = <&in_pu>;
>> + };
>> + };
>> +
>> + i2c1_sleep_mode: i2c_sleep {
>> + sleep_cfg1 {
>> + ste,pins = "GPIO16", "GPIO17";
>> + ste,config = <&slpm_in_pu>;
>> + };
>> + };
>> + };
>> +
>> + i2c2 {
>> + i2c2_default_mux: i2c_mux {
>> + default_mux {
>> + ste,function = "i2c2";
>> + ste,pins = "i2c2_b_2";
>> + };
>> + };
>> +
>> + i2c2_default_mode: i2c_default {
>> + default_cfg1 {
>> + ste,pins = "GPIO10", "GPIO11";
>> + ste,config = <&in_pu>;
>> + };
>> + };
>> +
>> + i2c2_sleep_mode: i2c_sleep {
>> + sleep_cfg1 {
>> + ste,pins = "GPIO11", "GPIO11";
>> + ste,config = <&slpm_in_pu>;
>> + };
>> + };
>> + };
>> +
>> + i2c4 {
>> + i2c4_default_mux: i2c_mux {
>> + default_mux {
>> + ste,function = "i2c4";
>> + ste,pins = "i2c4_b_2";
>> + };
>> + };
>> +
>> + i2c4_default_mode: i2c_default {
>> + default_cfg1 {
>> + ste,pins = "GPIO122", "GPIO123";
>> + ste,config = <&in_pu>;
>> + };
>> + };
>> +
>> + i2c4_sleep_mode: i2c_sleep {
>> + sleep_cfg1 {
>> + ste,pins = "GPIO122", "GPIO123";
>> + ste,config = <&slpm_in_pu>;
>> + };
>> + };
>> + };
>> +
>> + i2c5 {
>> + i2c5_default_mux: i2c_mux {
>> + default_mux {
>> + ste,function = "i2c5";
>> + ste,pins = "i2c5_c_2";
>> + };
>> + };
>> +
>> + i2c5_default_mode: i2c_default {
>> + default_cfg1 {
>> + ste,pins = "GPIO118", "GPIO119";
>> + ste,config = <&in_pu>;
>> + };
>> + };
>> +
>> + i2c5_sleep_mode: i2c_sleep {
>> + sleep_cfg1 {
>> + ste,pins = "GPIO118", "GPIO119";
>> + ste,config = <&slpm_in_pu>;
>> + };
>> + };
>> + };
>> };
>> diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
>> index 4f93795..3e7142b 100644
>> --- a/arch/arm/boot/dts/ccu8540.dts
>> +++ b/arch/arm/boot/dts/ccu8540.dts
>> @@ -44,5 +44,35 @@
>> pinctrl-1 = <&uart2_sleep_mode>;
>> status = "okay";
>> };
>> +
>> + i2c0: i2c@80004000 {
>> + pinctrl-names = "default","sleep";
>
> Can you place a ' ' after the ','?
>
>> + pinctrl-0 = <&i2c0_default_mux>,<&i2c0_default_mode>;
>
> All the way down ...
ok
>
>> + pinctrl-1 = <&i2c0_sleep_mode>;
>> + };
>> +
>> + i2c1: i2c@80122000 {
>> + pinctrl-names = "default","sleep";
>> + pinctrl-0 = <&i2c1_default_mux>,<&i2c1_default_mode>;
>> + pinctrl-1 = <&i2c1_sleep_mode>;
>> + };
>> +
>> + i2c2: i2c@80128000 {
>> + pinctrl-names = "default","sleep";
>> + pinctrl-0 = <&i2c2_default_mux>,<&i2c2_default_mode>;
>> + pinctrl-1 = <&i2c2_sleep_mode>;
>> + };
>> +
>> + i2c4: i2c@8012a000 {
>> + pinctrl-names = "default","sleep";
>> + pinctrl-0 = <&i2c4_default_mux>,<&i2c4_default_mode>;
>> + pinctrl-1 = <&i2c4_sleep_mode>;
>> + };
>> +
>> + i2c5: i2c@80001000 {
>> + pinctrl-names = "default","sleep";
>> + pinctrl-0 = <&i2c5_default_mux>,<&i2c5_default_mode>;
>> + pinctrl-1 = <&i2c5_sleep_mode>;
>> + };
>> };
>> };
>
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
