This phy is on Xilinx ZC702 zynq development board.

Signed-off-by: Anirudha Sarangi <anir...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
 drivers/net/phy/marvell.c   | 65 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |  1 +
 2 files changed, 66 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 371353c..df5a9f6 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -116,6 +116,8 @@
 #define MII_M1011_PHY_STATUS_RESOLVED  0x0800
 #define MII_M1011_PHY_STATUS_LINK      0x0400

+#define MII_M1116R_CONTROL_REG_MAC     21
+

 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -372,6 +374,55 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
        return m88e1121_config_aneg(phydev);
 }

+static int m88e1116r_config_init(struct phy_device *phydev)
+{
+       int temp;
+       int err;
+
+       temp = phy_read(phydev, MII_BMCR);
+       temp |= BMCR_RESET;
+       err = phy_write(phydev, MII_BMCR, temp);
+       if (err < 0)
+               return err;
+
+       mdelay(500);
+
+       err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+       if (err < 0)
+               return err;
+
+       temp = phy_read(phydev, MII_M1011_PHY_SCR);
+       temp |= (7 << 12);      /* max number of gigabit attempts */
+       temp |= (1 << 11);      /* enable downshift */
+       temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
+       err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
+       if (err < 0)
+               return err;
+       temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
+       temp |= (1 << 5);
+       temp |= (1 << 4);
+       err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
+       if (err < 0)
+               return err;
+       err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+       if (err < 0)
+               return err;
+
+       temp = phy_read(phydev, MII_BMCR);
+       temp |= BMCR_RESET;
+       err = phy_write(phydev, MII_BMCR, temp);
+       if (err < 0)
+               return err;
+
+       mdelay(500);
+
+       return 0;
+}
+
 static int m88e1111_config_init(struct phy_device *phydev)
 {
        int err;
@@ -940,6 +991,19 @@ static struct phy_driver marvell_drivers[] = {
                .config_intr = &marvell_config_intr,
                .driver = { .owner = THIS_MODULE },
        },
+       {
+               .phy_id = MARVELL_PHY_ID_88E1116R,
+               .phy_id_mask = MARVELL_PHY_ID_MASK,
+               .name = "Marvell 88E1116R",
+               .features = PHY_GBIT_FEATURES,
+               .flags = PHY_HAS_INTERRUPT,
+               .config_init = &m88e1116r_config_init,
+               .config_aneg = &genphy_config_aneg,
+               .read_status = &genphy_read_status,
+               .ack_interrupt = &marvell_ack_interrupt,
+               .config_intr = &marvell_config_intr,
+               .driver = { .owner = THIS_MODULE },
+       },
 };

 static int __init marvell_init(void)
@@ -967,6 +1031,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] 
= {
        { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
        { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
        { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
+       { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
        { }
 };

diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index dd3c34e..ec41025 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -14,6 +14,7 @@
 #define MARVELL_PHY_ID_88E1149R                0x01410e50
 #define MARVELL_PHY_ID_88E1240         0x01410e30
 #define MARVELL_PHY_ID_88E1318S                0x01410e90
+#define MARVELL_PHY_ID_88E1116R                0x01410e40

 /* struct phy_device dev_flags definitions */
 #define MARVELL_PHY_M1145_FLAGS_RESISTANCE     0x00000001
--
1.8.2.3

Attachment: pgpKgY5Uw7G8u.pgp
Description: PGP signature

Reply via email to