On Fri, Jun 07, 2013 at 13:40:52, Nori, Sekhar wrote:
> Hi Avinash,
>
> On 5/22/2013 12:40 PM, Philip Avinash wrote:
> > GPIO Davinci driver converted to platform driver to support DT booting.
> > In this patch series
> > - Cleaned gpio Davinci driver code with proper commenting style and
> > appropriate
> > variable names.
> > - Create platform driver for GPIO Davinci in da8xx and dm* platforms and
> > removed
> > gpio related member updation in davinci_soc_info structure.
> > - DT support added for da850 board and tested on da850 EVM.
> > - Remove soc_info reference in the gpio davinci driver and start uses
> > gpiolib interface.
>
> Can you please document which platforms this series was tested on and how?
This series being tested on da850 EVM. Tested by setting VPIF_DOUT[12] as GPIO
pin [2] and reading GPIO status from GPIO[7,4]
GPIO[7,4] will reflect the status switch number 8 of the S7 dip switch in DA850
EVM.
Testing Procedure
Requirement GPIO SYSFS support [1]
#echo 116 > /sys/class/gpio/export
setting GPIO[7,4] as input GPIO
#echo "in" > /sys/class/gpio/gpio116/direction
#mount -t debugfs debugfs /sys/kernel/debug
Reading GPIO pin status
#cat /sys/kernel/debug/gpio
#echo 116 > /sys/class/gpio/unexport
1. Enable GPIO SYSFS support through menconfig
--- GPIO Support
[ ] Debug GPIO calls
[ ] /sys/class/gpio/... (sysfs interface)
2. Patch for pinmux support for GPIO[7,4] is available at
https://github.com/avinashphilip/am335x_linux/commits/linux_davinci_v3.10_soc_gpio
Thanks
Avinash
>
> Thanks,
> Sekhar
>
