On 6/11/2013 12:19 PM, Philip, Avinash wrote: > On Tue, Jun 11, 2013 at 10:09:17, Nori, Sekhar wrote: >> >> On 6/10/2013 2:32 PM, Philip, Avinash wrote: >>> On Fri, Jun 07, 2013 at 13:40:52, Nori, Sekhar wrote: >>>> Hi Avinash, >>>> >>>> On 5/22/2013 12:40 PM, Philip Avinash wrote: >>>>> GPIO Davinci driver converted to platform driver to support DT booting. >>>>> In this patch series >>>>> - Cleaned gpio Davinci driver code with proper commenting style and >>>>> appropriate >>>>> variable names. >>>>> - Create platform driver for GPIO Davinci in da8xx and dm* platforms and >>>>> removed >>>>> gpio related member updation in davinci_soc_info structure. >>>>> - DT support added for da850 board and tested on da850 EVM. >>>>> - Remove soc_info reference in the gpio davinci driver and start uses >>>>> gpiolib interface. >>>> >>>> Can you please document which platforms this series was tested on and how? >>> >>> This series being tested on da850 EVM. Tested by setting VPIF_DOUT[12] as >>> GPIO >>> pin [2] and reading GPIO status from GPIO[7,4] >>> >>> GPIO[7,4] will reflect the status switch number 8 of the S7 dip switch in >>> DA850 EVM. >>> >>> Testing Procedure >>> >>> Requirement GPIO SYSFS support [1] >>> >>> #echo 116 > /sys/class/gpio/export >>> setting GPIO[7,4] as input GPIO >>> #echo "in" > /sys/class/gpio/gpio116/direction >>> #mount -t debugfs debugfs /sys/kernel/debug >>> Reading GPIO pin status >>> #cat /sys/kernel/debug/gpio >>> #echo 116 > /sys/class/gpio/unexport >>> >>> >>> 1. Enable GPIO SYSFS support through menconfig >>> --- GPIO Support >>> [ ] Debug GPIO calls >>> [ ] /sys/class/gpio/... (sysfs interface) >>> >>> 2. Patch for pinmux support for GPIO[7,4] is available at >>> https://github.com/avinashphilip/am335x_linux/commits/linux_davinci_v3.10_soc_gpio >> >> Can you check interrupt generation too since there are significant >> changes in that area? You can generate an interrupt using the MMC/SD >> card detect pin (inserting an MMC/SD card into the slot should generate >> an interrupt). You can also write a new value to any GPIO pin. That will >> also trigger an interrupt. > > I have tested GPIO interrupt with GPIO[7,4] by inserting a kernel module in > DA850 EVM. > For GPIO interrupt generation DIP switch position changed. > > Source code for GPIO test kernel module is shared at > https://github.com/avinashphilip/am335x_linux/commit/affc0c1841beacd8430af689f7f12dcab0cbaf28
Thanks for the test report. Regards, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/