Hello all,
While waiting/working in comments I realized/was reminded that there
where a few things I hadn't addressed. I'll try to go over all the
missing bits to be sure to answer all questions before submitting the
hopefully final version. This because I wouldn't want anybody to think
I'm ungrateful, because I am very much so.
> On 05/17/13 23:18, Maxime Ripard wrote:
+
+struct sid_priv {
+ void __iomem *sid_base;
+};
+
+struct sid_priv *p;
What's the point of having a structure here? And why putting a global
value, !static, with a generic name, while you could have an
instance-specific one?
and related (with the struct killed and the mem* renamed)
> On 02-06-13 17:09, Russell King - ARM Linux wrote:
So what happens if you have two of these devices? Maybe you want to check
whether p_sid_reg_base is already set?
I had to think a while about it, as my first answer was 'i don't know'.
But yeah you can't without some smart trick that I don't yet know.
> On 06-06-13 21:16, Andy Shevchenko wrote:
>> +static void __iomem *p_sid_reg_base;
> So, why it's global?
>
The idea behind the global pointer is, to have sunxi_sid_read_byte() be
usable without anything other then a memory offset/address of what byte
you want to read. The idea behind that is that you can use it from
within the kernel directly. I'll admit it's a future-proofing thing,
it's not exported now as there is no user for it yet. I talked to Maxime
about it and we (he) decided it's best to remove it for now, as we can
always add it back later when we find a user for it.
Having two SID's however is almost impossible too, since you get 1 per
SoC, and only 1 SoC per kernel? I added a guard in .probe() which only
loads the driver if the pointer is NULL.
> On 02-06-13 17:09, Russell King - ARM Linux wrote:
+ if (likely((SID_SIZE))) {
+ sid_key = ioread32be(p_sid_reg_base + round_down(offset, 4));
+ sid_key >>= (offset % 4) * 8;
+ ret = sid_key & 0xff;
+ }
What happens if you unbind the device in sysfs and then try and use
this function?
It goes kaboom. Again, i had no idea naturally. I think what you meant
was, if you unbind and p_sid_reg_base points to 'somewhere' and we just
randomly read bytes. I added p_sid_reg_base to the guard above to at
least check if it's not NULL.
> On 02-06-13 17:09, Russell King - ARM Linux wrote:
+static int sunxi_sid_remove(struct platform_device *pdev)
+{
+ device_remove_bin_file(&pdev->dev, &sid_bin_attr);
+ dev_info(&pdev->dev, "Sunxi SID driver unloaded successfully.\n");
Maybe you want to set p_sid_reg_base to NULL here?
Yeah, that made even more sense to the above thing and added it. When we
unbind or unload the driver, we point to NULL and a) can check for it
above and don't have nasty things dangling around. I think it was save
to assume, that when the driver is unloaded/unbound, the devm_set_data()
private data gets cleaned and the pointer set to NULL? I think that's
what Maxime/Emilio said, by using the devm stuff, those should get
cleaned up properly.
> On 02-06-13 17:09, Russell King - ARM Linux wrote:
+ platform_set_drvdata(pdev, sid_reg_base);
+ p_sid_reg_base = sid_reg_base;
So what happens if you have two of these devices? Maybe you want to check
whether p_sid_reg_base is already set?
Even that hint didn't trigger me as to why this could cause problems.
Userspace guy here, every driver has its own memory space right? So I've
added a guard that we only load this driver once and only if
p_sid_reg_base is NULL.
> On 02-06-13 17:09, Russell King - ARM Linux wrote:
+ dev_info(dev, "Sunxi SID driver loaded successfully.\n");
Do we really need to report that the driver "loaded successfully" ?
Do we need lots of lines in the kernel log telling us simply that
random driver X was built into the kernel or the module was loaded?
Don't we do that already though? I made the string more informative by
adding version information, but yeah I see tons of 'all is ok' rolling
by, isn't that a good thing? Isn't that only printed if we actually have
a SID onboard, so the user knows 'sid is available'. I know I often
scroll through dmesg to see if things got brought up nicely.
On 06-06-13 21:16, Andy Shevchenko wrote:
+ if (likely((SID_SIZE))) {
Extra braces.
Use antipattern here.
While this is a really small function, I guess if that's the normal
course of things; why not.
On 06-06-13 21:16, Andy Shevchenko wrote:
+ ret = sid_key & 0xff;
No need to do & 0xff, since return type is byte.
With ret removed, I assume having return (u8)sid_key; is okay? Does that
typecast only return the last byte? Or do we still want & 0xff in the
return added for clarity?
> On 06-06-13 21:16, Andy Shevchenko wrote
+static int __init sunxi_sid_probe(struct platform_device *pdev)
+{
+ int entropy[SID_SIZE], i, ret;
Usually ret variable is located at the end of definition block.
Moreover, there is no relationship between those three. It means one
line per variable.
That's a good rule to group variables with, I should have known. Done.
On 06-06-13 21:16, Andy Shevchenko wrote:
+ dev = &pdev->dev;
Please, be consistent, somewhere you still use &pdev->dev.
I recomend to use &pdev->dev everywhere in probe(), since we don't
know if the device will be probed successfully.
I would have thought that 'dev' would that it would be the same and valid,
but yes, I should have been consistent throughout. What bothers me here,
is that I actually managed to overlook it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
