On Tue, Jun 18, 2013 at 12:11:32AM -0400, Dave Jones wrote:
> The DR registers are rarely useful when decoding oopses.
> With screen real estate during oopses at a premium, we can save two lines
> by only printing out these registers when they are set to something other
> than they power-on state.
Makes sense, except...
>
> Signed-off-by: Dave Jones <da...@redhat.com>
>
> diff -durpN '--exclude-from=/home/davej/.exclude'
> /home/davej/src/kernel/git-trees/linux/arch/x86/kernel/process_64.c
> linux-dj/arch/x86/kernel/process_64.c
> --- /home/davej/src/kernel/git-trees/linux/arch/x86/kernel/process_64.c
> 2013-05-01 10:02:52.064151923 -0400
> +++ linux-dj/arch/x86/kernel/process_64.c 2013-05-06 20:35:09.219868881
> -0400
> @@ -105,11 +105,18 @@ void __show_regs(struct pt_regs *regs, i
> get_debugreg(d0, 0);
> get_debugreg(d1, 1);
> get_debugreg(d2, 2);
> - printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1,
> d2);
> get_debugreg(d3, 3);
> get_debugreg(d6, 6);
> get_debugreg(d7, 7);
> +
> + /* Only print out debug registers if they are in their non-default
> state. */
> + if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
> + (d6 & ~DR6_RESERVED) && (d7 == 0x400))
... I'm not sure about %dr6. So we're not dumping %dr6 when, a.o.
any of the bits in the bit slices [3:0], [15:13] are set (bit 12
is Read-As-Zero). Now those mean stuff like Breakpoint-Condition
Detected or Debug-Register-Access Detected and so on and I think this is
meaningful information.
So actually, we wouldn't want to dump %dr6 when its contents are its
default contents, i.e, 0xffff0ff0, i.e. the test should be:
(d6 == DR6_RESERVED)
no?
> + return;
> +
> + printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1,
> d2);
> printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6,
> d7);
> +
> }
>
> void release_thread(struct task_struct *dead_task)
>
> diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
> index 7305f7d..5905dc5 100644
> --- a/arch/x86/kernel/process_32.c
> +++ b/arch/x86/kernel/process_32.c
> @@ -110,11 +110,16 @@ void __show_regs(struct pt_regs *regs, int all)
> get_debugreg(d1, 1);
> get_debugreg(d2, 2);
> get_debugreg(d3, 3);
> - printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
> - d0, d1, d2, d3);
> -
> get_debugreg(d6, 6);
> get_debugreg(d7, 7);
> +
> + /* Only print out debug registers if they are in their non-default
> state. */
> + if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
> + (d6 & ~DR6_RESERVED) && (d7 == 0x400))
ditto.
> + return;
> +
> + printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
> + d0, d1, d2, d3);
> printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
> d6, d7);
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
