From: "Lad, Prabhakar" <prabhakar.cse...@gmail.com> add OF support for the tvp7002 driver.
Signed-off-by: Lad, Prabhakar <prabhakar.cse...@gmail.com> Cc: Hans Verkuil <hans.verk...@cisco.com> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com> Cc: Mauro Carvalho Chehab <mche...@redhat.com> Cc: Guennadi Liakhovetski <g.liakhovet...@gmx.de> Cc: Sylwester Nawrocki <s.nawro...@samsung.com> Cc: Sakari Ailus <sakari.ai...@iki.fi> Cc: Grant Likely <grant.lik...@secretlab.ca> Cc: Rob Herring <rob.herr...@calxeda.com> Cc: Rob Landley <r...@landley.net> Cc: devicetree-disc...@lists.ozlabs.org Cc: linux-...@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-sou...@linux.davincidsp.com --- Depends on patch https://patchwork.kernel.org/patch/2765851/ .../devicetree/bindings/media/i2c/tvp7002.txt | 43 +++++++++++++ drivers/media/i2c/tvp7002.c | 67 ++++++++++++++++++-- 2 files changed, 103 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp7002.txt diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt new file mode 100644 index 0000000..9daebe1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt @@ -0,0 +1,43 @@ +* Texas Instruments TV7002 video decoder + +The TVP7002 device supports digitizing of video and graphics signal in RGB and +YPbPr color space. + +Required Properties : +- compatible : Must be "ti,tvp7002" + +- hsync-active: HSYNC Polarity configuration for endpoint. + +- vsync-active: VSYNC Polarity configuration for endpoint. + +- pclk-sample: Clock polarity of the endpoint. + +- video-sync: Video sync property of the endpoint. + +- ti,tvp7002-fid-polarity: Active-high Field ID polarity of the endpoint. + + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp7002@5c { + compatible = "ti,tvp7002"; + reg = <0x5c>; + + port { + tvp7002_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + video-sync = <V4L2_MBUS_VIDEO_SYNC_ON_GREEN>; + ti,tvp7002-fid-polarity; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index b577548..4896024 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -35,6 +35,8 @@ #include <media/v4l2-device.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> +#include <media/v4l2-of.h> + #include "tvp7002_reg.h" MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver"); @@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = { .pad = &tvp7002_pad_ops, }; +static struct tvp7002_config * +tvp7002_get_pdata(struct i2c_client *client) +{ + struct v4l2_of_endpoint bus_cfg; + struct tvp7002_config *pdata; + struct device_node *endpoint; + unsigned int flags; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!endpoint) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + v4l2_of_parse_endpoint(endpoint, &bus_cfg); + flags = bus_cfg.bus.parallel.flags; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + pdata->hs_polarity = 1; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + pdata->vs_polarity = 1; + + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + pdata->clk_polarity = 1; + + if (flags & V4L2_MBUS_VIDEO_SYNC_ON_GREEN) + pdata->sog_polarity = 1; + + pdata->fid_polarity = of_property_read_bool(endpoint, + "ti,tvp7002-fid-polarity"); + +done: + of_node_put(endpoint); + return pdata; +} + /* * tvp7002_probe - Probe a TVP7002 device * @c: ptr to i2c_client struct @@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = { */ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) { + struct tvp7002_config *pdata = tvp7002_get_pdata(c); struct v4l2_subdev *sd; struct tvp7002 *device; struct v4l2_dv_timings timings; int polarity_a; int polarity_b; u8 revision; - int error; + if (pdata == NULL) { + dev_err(&c->dev, "No platform data\n"); + return -EINVAL; + } + /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(c->adapter, I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return -EIO; - if (!c->dev.platform_data) { - v4l_err(c, "No platform data!!\n"); - return -ENODEV; - } - device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL); if (!device) return -ENOMEM; sd = &device->sd; - device->pdata = c->dev.platform_data; + device->pdata = pdata; device->current_timings = tvp7002_timings; /* Tell v4l2 the device is ready */ @@ -1085,9 +1129,18 @@ static const struct i2c_device_id tvp7002_id[] = { }; MODULE_DEVICE_TABLE(i2c, tvp7002_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tvp7002_of_match[] = { + { .compatible = "ti,tvp7002", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, tvp7002_of_match); +#endif + /* I2C driver data */ static struct i2c_driver tvp7002_driver = { .driver = { + .of_match_table = of_match_ptr(tvp7002_of_match), .owner = THIS_MODULE, .name = TVP7002_MODULE_NAME, }, -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
