Hi, Oops, I have posted wrong patch by mistake. Sorry for the noise. Correct one is on the way.
Best regards, Tomasz On Tuesday 25 of June 2013 15:46:45 Tomasz Figa wrote: > This patch adds Device Tree support to max8998 driver. > > Signed-off-by: Tomasz Figa <[email protected]> > --- > Documentation/devicetree/bindings/mfd/max8998.txt | 119 > ++++++++++++++++++++ drivers/mfd/max8998.c | > 67 ++++++++++- drivers/regulator/max8998.c | 130 > +++++++++++++++++++++- drivers/rtc/rtc-max8998.c > | 2 +- > include/linux/mfd/max8998-private.h | 2 + > include/linux/mfd/max8998.h | 2 + > 6 files changed, 315 insertions(+), 7 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/max8998.txt > > Changes since v3: > - Addressed Sachin's comments: > - fixed typos in documentation > - removed redundant error messages > - and other minor stylistic fixes > - Reworded parts of the documentation and improved formatting a bit > - Simplified device tree parsing code even more > - Replaced most of #ifdef CONFIG_OF with if (IS_ENABLED(CONFIG_OF)) > to move responsibility of dropping unused code to compiler and avoid > unnecessary function stubs > > diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt > b/Documentation/devicetree/bindings/mfd/max8998.txt new file mode 100644 > index 0000000..23a3650 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/max8998.txt > @@ -0,0 +1,119 @@ > +* Maxim MAX8998, National/TI LP3974 multi-function device > + > +The Maxim MAX8998 is a multi-function device which includes > voltage/current +regulators, real time clock, battery charging > controller and several +other sub-blocks. It is interfaced using an I2C > interface. Each sub-block +is addressed by the host system using > different i2c slave address. + > +PMIC sub-block > +-------------- > + > +The PMIC sub-block contains a number of voltage and current regulators, > +with controllable parameters and dynamic voltage scaling capability. > +In addition, it includes a real time clock and battery charging > controller +as well. It is accessible at I2C address 0x66. > + > +Required properties: > +- compatible: Should be one of the following: > + - "maxim,max8998" for Maxim MAX8998 > + - "national,lp3974" or "ti,lp3974" for National/TI LP3974. > +- reg: Specifies the i2c slave address of the pmic block. It should be > 0x66. + > +Optional properties: > +- interrupt-parent: Specifies the phandle of the interrupt controller to > which + the interrupts from MAX8998 are routed to. > +- interrupts: Interrupt specifiers for two interrupt sources. > + - First interrupt specifier is for main interrupt. > + - Second interrupt specifier is for power-on/-off interrupt. > +- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used > + for buck 1 dvs. The format of the gpio specifier depends on the gpio > + controller. > +- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used > + for buck 2 dvs. The format of the gpio specifier depends on the gpio > + controller. > +- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected > from + the possible 4 options selectable by the dvs gpios. The value of > this + property should be 0, 1, 2 or 3. If not specified or out of > range, + a default value of 0 is taken. > +- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected > from + the possible 2 options selectable by the dvs gpios. The value of > this + property should be 0 or 1. If not specified or out of range, a > default + value of 0 is taken. > +- max8998,pmic-buck-voltage-lock: If present, disallows changing of > + preprogrammed buck dvfs voltages. > + > +Additional properties required if max8998,pmic-buck1-dvs-gpios is > defined: +- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values > in microvolts + for buck1 regulator that can be selected using dvs > gpio. > + > +Additional properties required if max8998,pmic-buck2-dvs-gpio is > defined: +- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values > in microvolts + for buck2 regulator that can be selected using dvs > gpio. > + > +Regulators: All the regulators of MAX8998 to be instantiated shall be > +listed in a child node named 'regulators'. Each regulator is represented > +by a child node of the 'regulators' node. > + > + regulator-name { > + /* standard regulator bindings here */ > + }; > + > +Following regulators of the MAX8998 PMIC block are supported. Note that > +the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or > BUCK +number as described in MAX8998 datasheet. > + > + - LDOn > + - valid values for n are 2 to 17 > + - Example: LDO2, LDO10, LDO17 > + - BUCKn > + - valid values for n are 1 to 4. > + - Example: BUCK1, BUCK2, BUCK3, BUCK4 > + > + - ENVICHG: Battery Charging Current Monitor Output. This is a fixed > + voltage type regulator > + > + - ESAFEOUT1: (ldo19) > + - ESAFEOUT2: (ld020) > + > +Standard regulator bindings are used inside regulator subnodes. Check > + Documentation/devicetree/bindings/regulator/regulator.txt > +for more details. > + > +Example: > + > + pmic@66 { > + compatible = "maxim,max8998-pmic"; > + reg = <0x66>; > + interrupt-parent = <&wakeup_eint>; > + interrupts = <4 0>, <3 0>; > + > + /* Buck 1 DVS settings */ > + max8998,pmic-buck1-default-dvs-idx = <0>; > + max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ > + <&gpx0 1 1 0 0>; /* SET2 */ > + max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, > + <1000000>, <950000>; > + > + /* Buck 2 DVS settings */ > + max8998,pmic-buck2-default-dvs-idx = <0>; > + max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ > + max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; > + > + /* Regulators to instantiate */ > + regulators { > + ldo2_reg: LDO2 { > + regulator-name = "VDD_ALIVE_1.1V"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VDD_ARM_1.2V"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + }; > + }; > diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c > index d7218cc..21af51a 100644 > --- a/drivers/mfd/max8998.c > +++ b/drivers/mfd/max8998.c > @@ -20,12 +20,15 @@ > * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 > USA */ > > +#include <linux/err.h> > #include <linux/module.h> > #include <linux/moduleparam.h> > #include <linux/init.h> > #include <linux/slab.h> > #include <linux/i2c.h> > #include <linux/interrupt.h> > +#include <linux/of.h> > +#include <linux/of_irq.h> > #include <linux/pm_runtime.h> > #include <linux/mutex.h> > #include <linux/mfd/core.h> > @@ -128,6 +131,56 @@ int max8998_update_reg(struct i2c_client *i2c, u8 > reg, u8 val, u8 mask) } > EXPORT_SYMBOL(max8998_update_reg); > > +#ifdef CONFIG_OF > +static struct of_device_id max8998_dt_match[] = { > + { .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 }, > + { .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 }, > + { .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, max8998_dt_match); > +#endif > + > +/* > + * Only the common platform data elements for max8998 are parsed here > from the + * device tree. Other sub-modules of max8998 such as pmic, rtc > and others have + * to parse their own platform data elements from > device tree. + * > + * The max8998 platform data structure is instantiated here and the > drivers for + * the sub-modules need not instantiate another instance > while parsing their + * platform data. > + */ > +static struct max8998_platform_data *max8998_i2c_parse_dt_pdata( > + struct device *dev) > +{ > + struct max8998_platform_data *pd; > + > + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); > + if (!pd) > + return ERR_PTR(-ENOMEM); > + > + pd->ono = irq_of_parse_and_map(dev->of_node, 1); > + > + /* > + * ToDo: the 'wakeup' member in the platform data is more of a linux > + * specfic information. Hence, there is no binding for that yet and > + * not parsed here. > + */ > + return pd; > +} > + > +static inline int max8998_i2c_get_driver_data(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) { > + const struct of_device_id *match; > + match = of_match_node(max8998_dt_match, i2c->dev.of_node); > + return (int)match->data; > + } > + > + return (int)id->driver_data; > +} > + > static int max8998_i2c_probe(struct i2c_client *i2c, > const struct i2c_device_id *id) > { > @@ -139,11 +192,20 @@ static int max8998_i2c_probe(struct i2c_client > *i2c, if (max8998 == NULL) > return -ENOMEM; > > + if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) { > + pdata = max8998_i2c_parse_dt_pdata(&i2c->dev); > + if (IS_ERR(pdata)) { > + ret = PTR_ERR(pdata); > + goto err; > + } > + } > + > i2c_set_clientdata(i2c, max8998); > max8998->dev = &i2c->dev; > max8998->i2c = i2c; > max8998->irq = i2c->irq; > - max8998->type = id->driver_data; > + max8998->type = max8998_i2c_get_driver_data(i2c, id); > + max8998->pdata = pdata; > if (pdata) { > max8998->ono = pdata->ono; > max8998->irq_base = pdata->irq_base; > @@ -158,7 +220,7 @@ static int max8998_i2c_probe(struct i2c_client *i2c, > > pm_runtime_set_active(max8998->dev); > > - switch (id->driver_data) { > + switch (max8998->type) { > case TYPE_LP3974: > ret = mfd_add_devices(max8998->dev, -1, > lp3974_devs, ARRAY_SIZE(lp3974_devs), > @@ -314,6 +376,7 @@ static struct i2c_driver max8998_i2c_driver = { > .name = "max8998", > .owner = THIS_MODULE, > .pm = &max8998_pm, > + .of_match_table = of_match_ptr(max8998_dt_match), > }, > .probe = max8998_i2c_probe, > .remove = max8998_i2c_remove, > diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c > index 8c45b93..e87bc80 100644 > --- a/drivers/regulator/max8998.c > +++ b/drivers/regulator/max8998.c > @@ -28,8 +28,11 @@ > #include <linux/slab.h> > #include <linux/interrupt.h> > #include <linux/mutex.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > #include <linux/platform_device.h> > #include <linux/regulator/driver.h> > +#include <linux/regulator/of_regulator.h> > #include <linux/mfd/max8998.h> > #include <linux/mfd/max8998-private.h> > > @@ -589,13 +592,13 @@ static struct regulator_desc regulators[] = { > .type = REGULATOR_VOLTAGE, > .owner = THIS_MODULE, > }, { > - .name = "EN32KHz AP", > + .name = "EN32KHz-AP", > .id = MAX8998_EN32KHZ_AP, > .ops = &max8998_others_ops, > .type = REGULATOR_VOLTAGE, > .owner = THIS_MODULE, > }, { > - .name = "EN32KHz CP", > + .name = "EN32KHz-CP", > .id = MAX8998_EN32KHZ_CP, > .ops = &max8998_others_ops, > .type = REGULATOR_VOLTAGE, > @@ -621,10 +624,121 @@ static struct regulator_desc regulators[] = { > } > }; > > +static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev, > + struct max8998_platform_data *pdata, > + struct device_node *pmic_np) > +{ > + int gpio; > + > + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0); > + if (!gpio_is_valid(gpio)) { > + dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio); > + return -EINVAL; > + } > + pdata->buck1_set1 = gpio; > + > + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1); > + if (!gpio_is_valid(gpio)) { > + dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio); > + return -EINVAL; > + } > + pdata->buck1_set2 = gpio; > + > + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0); > + if (!gpio_is_valid(gpio)) { > + dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio); > + return -EINVAL; > + } > + pdata->buck2_set3 = gpio; > + > + return 0; > +} > + > +static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, > + struct max8998_platform_data *pdata) > +{ > + struct device_node *pmic_np = iodev->dev->of_node; > + struct device_node *regulators_np, *reg_np; > + struct max8998_regulator_data *rdata; > + unsigned int i; > + int ret; > + > + regulators_np = of_get_child_by_name(pmic_np, "regulators"); > + if (!regulators_np) { > + dev_err(iodev->dev, "could not find regulators sub-node\n"); > + return -EINVAL; > + } > + > + /* count the number of regulators to be supported in pmic */ > + pdata->num_regulators = of_get_child_count(regulators_np); > + > + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * > + pdata->num_regulators, GFP_KERNEL); > + if (!rdata) > + return -ENOMEM; > + > + pdata->regulators = rdata; > + for (i = 0; i < ARRAY_SIZE(regulators); ++i) { > + reg_np = of_get_child_by_name(regulators_np, > + regulators[i].name); > + if (!reg_np) > + continue; > + > + rdata->id = regulators[i].id; > + rdata->initdata = of_get_regulator_init_data( > + iodev->dev, reg_np); > + rdata->reg_node = reg_np; > + ++rdata; > + } > + > + ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); > + if (ret) > + return -EINVAL; > + > + if (of_find_property(pmic_np, "max8998,pmic-buck-voltage-lock", NULL)) > + pdata->buck_voltage_lock = true; > + > + ret = of_property_read_u32(pmic_np, > + "max8998,pmic-buck1-default-dvs-idx", > + &pdata->buck1_default_idx); > + if (!ret && pdata->buck1_default_idx >= 4) { > + pdata->buck1_default_idx = 0; > + dev_warn(iodev->dev, "invalid value for default dvs index, > using 0 > instead\n"); + } > + > + ret = of_property_read_u32(pmic_np, > + "max8998,pmic-buck2-default-dvs-idx", > + &pdata->buck2_default_idx); > + if (!ret && pdata->buck2_default_idx >= 2) { > + pdata->buck2_default_idx = 0; > + dev_warn(iodev->dev, "invalid value for default dvs index, > using 0 > instead\n"); + } > + > + ret = of_property_read_u32_array(pmic_np, > + "max8998,pmic-buck1-dvs-voltage", > + pdata->buck1_voltage, > + ARRAY_SIZE(pdata->buck1_voltage)); > + if (ret) { > + dev_err(iodev->dev, "buck1 voltages not specified\n"); > + return -EINVAL; > + } > + > + ret = of_property_read_u32_array(pmic_np, > + "max8998,pmic-buck2-dvs-voltage", > + pdata->buck2_voltage, > + ARRAY_SIZE(pdata->buck2_voltage)); > + if (ret) { > + dev_err(iodev->dev, "buck2 voltages not specified\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > static int max8998_pmic_probe(struct platform_device *pdev) > { > struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); > - struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); > + struct max8998_platform_data *pdata = iodev->pdata; > struct regulator_config config = { }; > struct regulator_dev **rdev; > struct max8998_data *max8998; > @@ -637,6 +751,12 @@ static int max8998_pmic_probe(struct platform_device > *pdev) return -ENODEV; > } > > + if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) { > + ret = max8998_pmic_dt_parse_pdata(iodev, pdata); > + if (ret) > + return ret; > + } > + > max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data), > GFP_KERNEL); > if (!max8998) > @@ -750,13 +870,15 @@ static int max8998_pmic_probe(struct > platform_device *pdev) } > > config.dev = max8998->dev; > + config.of_node = pdata->regulators[i].reg_node; > config.init_data = pdata->regulators[i].initdata; > config.driver_data = max8998; > > rdev[i] = regulator_register(®ulators[index], &config); > if (IS_ERR(rdev[i])) { > ret = PTR_ERR(rdev[i]); > - dev_err(max8998->dev, "regulator init failed\n"); > + dev_err(max8998->dev, "regulator %s init failed (%d)\n", > + regulators[index].name, ret); > rdev[i] = NULL; > goto err; > } > diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c > index 46f2301..042a873 100644 > --- a/drivers/rtc/rtc-max8998.c > +++ b/drivers/rtc/rtc-max8998.c > @@ -253,7 +253,7 @@ static const struct rtc_class_ops max8998_rtc_ops = { > static int max8998_rtc_probe(struct platform_device *pdev) > { > struct max8998_dev *max8998 = dev_get_drvdata(pdev->dev.parent); > - struct max8998_platform_data *pdata = dev_get_platdata(max8998->dev); > + struct max8998_platform_data *pdata = max8998->pdata; > struct max8998_rtc_info *info; > int ret; > > diff --git a/include/linux/mfd/max8998-private.h > b/include/linux/mfd/max8998-private.h index bfb48b6..84844e0 100644 > --- a/include/linux/mfd/max8998-private.h > +++ b/include/linux/mfd/max8998-private.h > @@ -137,6 +137,7 @@ struct irq_domain; > /** > * struct max8998_dev - max8998 master device for sub-drivers > * @dev: master device of the chip (can be used to access platform data) > + * @pdata: platform data for the driver and subdrivers > * @i2c: i2c client private data for regulator > * @rtc: i2c client private data for rtc > * @iolock: mutex for serializing io access > @@ -150,6 +151,7 @@ struct irq_domain; > */ > struct max8998_dev { > struct device *dev; > + struct max8998_platform_data *pdata; > struct i2c_client *i2c; > struct i2c_client *rtc; > struct mutex iolock; > diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h > index ca56bb0..e3956a6 100644 > --- a/include/linux/mfd/max8998.h > +++ b/include/linux/mfd/max8998.h > @@ -58,10 +58,12 @@ enum { > * max8998_regulator_data - regulator data > * @id: regulator id > * @initdata: regulator init data (contraints, supplies, ...) > + * @reg_node: DT node of regulator (unused on non-DT platforms) > */ > struct max8998_regulator_data { > int id; > struct regulator_init_data *initdata; > + struct device_node *reg_node; > }; > > /** -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
