On Tue, Jul 16, 2013 at 08:53:02PM +0900, Tetsuo Handa wrote: > I got below failure. > > [ 5.258911] scsi 1:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 > 1.00 PQ: 0 ANSI: 5 > [ 5.267651] modprobe (156) used greatest stack depth: 4064 bytes left > [ 5.293607] Fusion MPT base driver 3.04.20 > [ 5.294416] Copyright (c) 1999-2008 LSI Corporation > [ 5.300109] Fusion MPT SPI Host driver 3.04.20 > [ 5.300967] Switched to clocksource tsc > [ 5.310921] mptbase: ioc0: Initiating bringup > [ 5.329480] ioc0: LSI53C1030 B0: Capabilities={Initiator} > [ 5.373136] scsi2 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, > MaxQ=128, IRQ=17 > [ 5.406190] scsi 2:0:0:0: Direct-Access VMware, VMware Virtual S > 1.0 PQ: 0 ANSI: 2 > [ 5.408582] scsi target2:0:0: Beginning Domain Validation > [ 5.415451] scsi target2:0:0: Domain Validation skipping write tests > [ 5.416399] scsi target2:0:0: Ending Domain Validation > [ 5.417445] scsi target2:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, > offset 127) > [ 5.419855] scsi 2:0:1:0: Direct-Access VMware, VMware Virtual S > 1.0 PQ: 0 ANSI: 2 > [ 5.420404] scsi target2:0:1: Beginning Domain Validation > [ 5.423171] scsi target2:0:1: Domain Validation skipping write tests > [ 5.423363] scsi target2:0:1: Ending Domain Validation > [ 5.424440] scsi target2:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, > offset 127) > [ 5.439700] modprobe (211) used greatest stack depth: 3872 bytes left > [ 5.561700] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 5.562596] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 5.667330] scsi_id (264) used greatest stack depth: 3568 bytes left > FATAL: Module scsi_wait_scan not found. > > FATAL: Module scsi_wait_scan not found. > > FATAL: Module scsi_wait_scan not found. > (...snipped...) > [ 60.308916] dracut Warning: Boot has failed. To debug this issue add > "rdshell" to the kernel command line. > [ 60.311431] dracut Warning: Signal caught! > > Kernel config is at http://I-love.SAKURA.ne.jp/tmp/config-3.11-rc1 > > Bisected to commit 2d31e518 "crypto: crct10dif - Wrap crc_t10dif function all > to use crypto transform framework", and confirmed that changing from > CONFIG_CRYPTO_CRCT10DIF=m to CONFIG_CRYPTO_CRCT10DIF=y solves this problem.
Looks like a bug in whatever is creating the initrd as it isn't including modules necessary for the boot. Cheers, -- Email: Herbert Xu <herb...@gondor.apana.org.au> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/