Hi Maxime,
El 17/08/13 16:08, Maxime Ripard escribió:
The Allwinner A20 is almost identical to the earlier A10 SoC from
Allwinner on many aspects, including the clocks tree. However, since the
A20 has some additionnal IPs compared to the A10, the clock tree isn't
exactly the same, especially when it comes to the gated clocks
available. We thus need to register different clock gates for the A20.
Signed-off-by: Maxime Ripard <[email protected]>
Code wise it looks good to me, I just have some small comments.
Reviewed-by: Emilio López <[email protected]>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 3 +
.../bindings/clock/sunxi/sun7i-a20-gates.txt | 98 ++++++++++++++++++++++
drivers/clk/sunxi/clk-sunxi.c | 15 ++++
3 files changed, 116 insertions(+)
create mode 100644
Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt
b/Documentation/devicetree/bindings/clock/sunxi.txt
index c383d12..00a5c264 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -16,18 +16,21 @@ Required properties:
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
+ "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun4i-apb0-clk" - for the APB0 clock
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+ "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
"allwinner,sun4i-apb1-clk" - for the APB1 clock
"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
+ "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
new file mode 100644
index 0000000..357f4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
@@ -0,0 +1,98 @@
+Gate clock outputs
+------------------
+
+ * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+ DRAM 0
+
+ * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
+
+ USB0 0
+ EHCI0 1
+ OHCI0 2
+ EHCI1 3
+ OHCI1 4
+ SS 5
+ DMA 6
+ BIST 7
+ MMC0 8
+ MMC1 9
+ MMC2 10
+ MMC3 11
+ MS 12
+ NAND 13
+ SDRAM 14
+
+ ACE 16
+ EMAC 17
+ TS 18
+
+ SPI0 20
+ SPI1 21
+ SPI2 22
+ SPI3 23
+
+ SATA 25
+
+ HSTIMER 28
+
+ VE 32
+ TVD 33
+ TVE0 34
+ TVE1 35
+ LCD0 36
+ LCD1 37
+
+ CSI0 40
+ CSI1 41
+
+ HDMI1 42
+ HDMI0 43
+ DE_BE0 44
+ DE_BE1 45
+ DE_FE1 46
+ DE_FE1 47
+
+ GMAC 49
+ MP 50
+
+ MALI400 52
+
+ * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
+
+ CODEC 0
+ SPDIF 1
+ AC97 2
+ IIS0 3
+ IIS1 4
+ PIO 5
+ IR0 6
+ IR1 7
+ IIS2 8
+
+ KEYPAD 10
+
+ * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
+
+ I2C0 0
+ I2C1 1
+ I2C2 2
+ I2C3 3
+ CAN 4
+ SCR 5
+ PS20 6
+ PS21 7
+
+ I2C4 15
+ UART0 16
+ UART1 17
+ UART2 18
+ UART3 19
+ UART4 20
+ UART5 21
+ UART6 22
+ UART7 23
+
+Notation:
+ [*]: The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
Same comment as on the other series, this can probably be dropped as
you're not using it, but it's not a deal breaker as it might come in
handy in the future.
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index bd01a02..c359775 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -462,6 +462,10 @@ static const __initconst struct gates_data
sun6i_a31_ahb1_gates_data = {
.mask = {0xEDFE7F62, 0x794F931},
};
+static const __initconst struct gates_data sun7i_a20_ahb_gates_data = {
+ .mask = { 0x12f77fff, 0x16ff3f },
+};
+
static const __initconst struct gates_data sun4i_apb0_gates_data = {
.mask = {0x4EF},
};
@@ -474,6 +478,10 @@ static const __initconst struct gates_data
sun5i_a13_apb0_gates_data = {
.mask = {0x61},
};
+static const __initconst struct gates_data sun7i_a20_apb0_gates_data = {
+ .mask = { 0x4ff },
+};
+
static const __initconst struct gates_data sun4i_apb1_gates_data = {
.mask = {0xFF00F7},
};
@@ -494,6 +502,10 @@ static const __initconst struct gates_data
sun6i_a31_apb2_gates_data = {
.mask = {0x3F000F},
};
+static const __initconst struct gates_data sun7i_a20_apb1_gates_data = {
+ .mask = { 0xff80ff },
+};
+
I believe we discussed this already on another series :) I'd rather see
A20 support merged than having it stalled because of a style issue though.
static void __init sunxi_gates_clk_setup(struct device_node *node,
struct gates_data *data)
{
@@ -575,13 +587,16 @@ static const __initconst struct of_device_id
clk_gates_match[] = {
{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data =
&sun5i_a10s_ahb_gates_data,},
{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data =
&sun5i_a13_ahb_gates_data,},
{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data =
&sun6i_a31_ahb1_gates_data,},
+ {.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data =
&sun7i_a20_ahb_gates_data,},
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data =
&sun4i_apb0_gates_data,},
{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data =
&sun5i_a10s_apb0_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data =
&sun5i_a13_apb0_gates_data,},
+ {.compatible = "allwinner,sun7i-a20-apb0-gates-clk", .data =
&sun7i_a20_apb0_gates_data,},
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data =
&sun4i_apb1_gates_data,},
{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data =
&sun5i_a10s_apb1_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data =
&sun5i_a13_apb1_gates_data,},
{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data =
&sun6i_a31_apb1_gates_data,},
+ {.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data =
&sun7i_a20_apb1_gates_data,},
{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data =
&sun6i_a31_apb2_gates_data,},
{}
};
Once again, thank you for working on this :) Hopefully I'll have an A20
device to do tests on soon.
Cheers,
Emilio
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
