Adds support for thermal sensors on STiH41x series SOCs.
Single trip point 'THERMAL_TRIP_CRITICAL' is supported.
STIH416 MPE sensor supports interrupt reporting when a preset
threshold temperature is crossed.
For rest of the thermal sensors a polling delay of 10000ms is
set.
CC: Stephen Gallimore <stephen.gallim...@st.com>
CC: Srinivas Kandagatla <srinivas.kandaga...@st.com>
Signed-off-by: Ajit Pal Singh <ajitpal.si...@st.com>
---
.../devicetree/bindings/thermal/st-thermal.txt | 22 +
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/st_thermal.c | 633 ++++++++++++++++++++
4 files changed, 667 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/st-thermal.txt
create mode 100644 drivers/thermal/st_thermal.c
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt
b/Documentation/devicetree/bindings/thermal/st-thermal.txt
new file mode 100644
index 0000000..f127044
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -0,0 +1,22 @@
+Binding for Thermal sensor driver for STMicroelectronics STiH41x series of
SoCs.
+
+Required parameters:
+1) compatible : st,<SoC>-<module>-thermal
+ Should be one of "st,stih415-sas-thermal",
"st,stih415-mpe-thermal",
+ "st,stih416-sas-thermal" or "st,stih416-mpe-thermal" according
to the
+ SoC type (stih415 or stih416) and module type (sas or mpe).
+2) st,syscfg : Should be a phandle of the syscfg node.
+3) clocks: phandle of the clock used by the thermal sensor according to
the common
+ clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional:
+1) interrupts: Standard way to define interrupt number.
+ refer: Documentation/devicetree/bindings/resource-names.txt
+ Interrupt is mandatory to be defined when compatible is
stih416-mpe-thermal.
+
+Example:
+temp0{
+ compatible = "st,stih416-sas-thermal";
+ st,syscfg = <&syscfg_front>;
+ clocks = <&CLOCKGEN_C_VCC 14>;
+}
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e988c81..158b4d8 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -180,6 +180,17 @@ config X86_PKG_TEMP_THERMAL
two trip points which can be set by user to get notifications via
thermal
notification methods.
+config ST_THERMAL
+ tristate "Thermal sensors on STMicroelectronics STiH41x series of SoCs"
+ depends on ARCH_STI
+ depends on OF
+ default y
+ help
+ Support for thermal sensors on STMicroelectronics STiH41x series of
+ SoCs. STiH415 and STiH416 SoCs have 2 thermal sensors each, one on the
+ SAS and second on the MPE module. STiH416 MPE thermal sensor supports
+ interrupt reporting when a preset thermal threshold is crossed.
+
menu "Texas Instruments thermal drivers"
source "drivers/thermal/ti-soc-thermal/Kconfig"
endmenu
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 67184a2..d0a4c86 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING) +=
db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
+obj-$(CONFIG_ST_THERMAL) += st_thermal.o
diff --git a/drivers/thermal/st_thermal.c b/drivers/thermal/st_thermal.c
new file mode 100644
index 0000000..8645a9c
--- /dev/null
+++ b/drivers/thermal/st_thermal.c
@@ -0,0 +1,633 @@
+/*
+ * st_thermal.c: ST Thermal Sensor Driver for STIH41x series of SoCs
+ * Author: Ajit Pal Singh <ajitpal.si...@st.com>
+ *
+ * Copyright (C) 2003-2013 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/thermal.h>
+
+#define DRIVER_NAME "st-thermal"
+
+/* Regfield IDs */
+enum {
+ /*
+ * The PWR and INTerrupt threshold regfields
+ * share the same index as they are mutually exclusive
+ */
+ TEMP_PWR = 0, INT_THRESH_HI = 0,
+ DCORRECT = 1,
+ OVERFLOW = 2,
+ DATA = 3,
+ INT_ENABLE = 4,
+ /* keep last */
+ MAX_REGFIELDS
+};
+
+/* Thermal sensor power states */
+enum st_thermal_power_state {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+struct st_thermal_sensor;
+
+struct st_thermal_sensor_ops {
+ /* Power control */
+ int (*power_ctrl)(struct st_thermal_sensor *,
+ enum st_thermal_power_state);
+ /* Adjust the temperature read from the sensor */
+ unsigned int (*adjust_temp)(struct st_thermal_sensor *,
+ unsigned int);
+ /* Allocate regfields specific for this sensor */
+ int (*alloc_regfields)(struct st_thermal_sensor *);
+ int (*register_irq)(struct st_thermal_sensor *);
+ int (*enable_irq)(struct st_thermal_sensor *);
+};
+
+struct st_thermal_compat_data {
+ const struct reg_field *reg_fields;
+ struct st_thermal_sensor_ops *ops;
+ unsigned int calibration_val;
+ int temp_adjust_val;
+ int crit_temp;
+};
+
+struct st_thermal_sensor {
+ struct platform_device *pdev;
+ struct thermal_zone_device *th_dev;
+ struct st_thermal_sensor_ops *ops;
+ const struct st_thermal_compat_data *data;
+ struct clk *clk;
+ struct regmap *regmap;
+ struct regmap_field *pwr;
+ struct regmap_field *dcorrect;
+ struct regmap_field *overflow;
+ struct regmap_field *temp_data;
+ struct regmap_field *int_thresh_hi;
+ struct regmap_field *int_enable;
+ unsigned int irq;
+};
+
+/* Helper macros */
+#define thzone_to_sensor(th) ((th)->devdata)
+#define sensor_to_dev(sensor) (&(sensor)->pdev->dev)
+
+/* STiH415 */
+#define STIH415_SYSCFG_FRONT(num) ((num - 100)*4)
+#define STIH415_SYSCFG_MPE(num) ((num - 600)*4)
+
+#define STIH415_SAS_THSENS_CONF
STIH415_SYSCFG_FRONT(178)
+#define STIH415_SAS_THSENS_STATUS STIH415_SYSCFG_FRONT(198)
+#define STIH415_MPE_THSENS_CONF STIH415_SYSCFG_MPE(607)
+#define STIH415_MPE_THSENS_STATUS STIH415_SYSCFG_MPE(667)
+
+/* STiH416 */
+#define STIH416_SYSCFG_FRONT(num) ((num - 1000)*4)
+#define STIH416_SYSCFG_THSENS(num) (num*4)
+
+#define STIH416_SAS_THSENS_CONF
STIH416_SYSCFG_FRONT(1552)
+#define STIH416_SAS_THSENS_STATUS1 STIH416_SYSCFG_FRONT(1554)
+#define STIH416_SAS_THSENS_STATUS2 STIH416_SYSCFG_FRONT(1594)
+#define STIH416_MPE_THSENS_CONF STIH416_SYSCFG_THSENS(0)
+#define STIH416_MPE_THSENS_STATUS STIH416_SYSCFG_THSENS(1)
+#define STIH416_MPE_THSENS_INT_THRESH STIH416_SYSCFG_THSENS(2)
+#define STIH416_MPE_THSENS_INT_EN STIH416_SYSCFG_THSENS(3)
+
+/* STiH416_MPE power control bits */
+#define STIH416_MPE_PDN BIT(4)
+#define STIH416_MPE_SRSTN BIT(10)
+
+#define mcelsius(temp) ((temp) * 1000)
+
+static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF, 9, 9),
+ [DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF, 4, 8),
+ [OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 11, 18),
+};
+
+static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF, 8, 8),
+ [DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF, 3, 7),
+ [OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18),
+};
+
+static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF, 9, 9),
+ [DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF, 4, 8),
+ [OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8, 8),
+ [DATA] = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16),
+};
+
+static const struct reg_field st_416mpe_regfields[MAX_REGFIELDS] = {
+ /*
+ * According to the STIH416 MPE temp sensor data sheet -
+ * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
+ * written simultaneously for powering on and off the temperature
+ * sensor. regmap_update_bits() will be used to update the register.
+ */
+ [INT_THRESH_HI] = REG_FIELD(STIH416_MPE_THSENS_INT_THRESH, 0, 7),
+ [DCORRECT] = REG_FIELD(STIH416_MPE_THSENS_CONF, 5, 9),
+ [OVERFLOW] = REG_FIELD(STIH416_MPE_THSENS_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STIH416_MPE_THSENS_STATUS, 11, 18),
+ [INT_ENABLE] = REG_FIELD(STIH416_MPE_THSENS_INT_EN, 0, 0),
+};
+
+static irqreturn_t st_thermal_thresh_int(int irq, void *data)
+{
+ struct st_thermal_sensor *sensor = data;
+ struct device *dev = sensor_to_dev(sensor);
+
+ dev_dbg(dev, "%s,called\n", __func__);
+ thermal_zone_device_update(sensor->th_dev);
+ return IRQ_HANDLED;
+}
+
+static int st_thermal_alloc_common_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor_to_dev(sensor);
+ struct regmap *regmap = sensor->regmap;
+ const struct reg_field *reg_fields = sensor->data->reg_fields;
+
+ sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[DCORRECT]);
+
+ sensor->overflow = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[OVERFLOW]);
+
+ sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[DATA]);
+
+ if (IS_ERR(sensor->dcorrect) || IS_ERR(sensor->overflow) ||
+ IS_ERR(sensor->temp_data)) {
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* Private ops for STIH415 SAS,MPE & STIH416 SAS sensor modules */
+static int st_power_ctrl(struct st_thermal_sensor *sensor,
+ enum st_thermal_power_state power_state)
+{
+ return regmap_field_write(sensor->pwr, power_state);
+}
+
+static unsigned int st_adjust_temp(struct st_thermal_sensor *sensor,
+ unsigned int raw_temp)
+{
+ return raw_temp + sensor->data->temp_adjust_val;
+}
+
+static int st_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor_to_dev(sensor);
+ int ret;
+
+ ret = st_thermal_alloc_common_regfields(sensor);
+ if (ret)
+ return ret;
+
+ sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap,
+ sensor->data->reg_fields[TEMP_PWR]);
+ if (IS_ERR(sensor->pwr)) {
+ dev_err(dev, "%s,failed to alloc reg field\n", __func__);
+ return PTR_ERR(sensor->pwr);
+ }
+ return 0;
+}
+
+static struct st_thermal_sensor_ops st_sensor_ops = {
+ .power_ctrl = st_power_ctrl,
+ .adjust_temp = st_adjust_temp,
+ .alloc_regfields = st_alloc_regfields,
+};
+
+/* Private ops for the STIH416 MPE sensor module */
+static int st_416mpe_power_ctrl(struct st_thermal_sensor *sensor,
+ enum st_thermal_power_state power_state)
+{
+ const unsigned int mask = (STIH416_MPE_PDN | STIH416_MPE_SRSTN);
+ const unsigned int val = power_state ? mask : 0;
+ return regmap_update_bits(sensor->regmap, STIH416_MPE_THSENS_CONF,
+ mask, val);
+}
+
+static unsigned int st_416mpe_adjust_temp(struct st_thermal_sensor *sensor,
+ unsigned int raw_temp)
+{
+ return raw_temp - sensor->data->temp_adjust_val;
+}
+
+static int st_416mpe_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor_to_dev(sensor);
+ struct regmap *regmap = sensor->regmap;
+ const struct reg_field *reg_fields = sensor->data->reg_fields;
+ int ret;
+
+ ret = st_thermal_alloc_common_regfields(sensor);
+ if (ret)
+ return ret;
+
+ sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[INT_THRESH_HI]);
+ sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[INT_ENABLE]);
+ if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
+ dev_err(dev, "%s,failed to alloc reg field(s)\n", __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int st_416mpe_register_irq(struct st_thermal_sensor *sensor)
+{
+ struct platform_device *pdev = sensor->pdev;
+ struct device *dev = sensor_to_dev(sensor);
+ int ret;
+
+ sensor->irq = platform_get_irq(pdev, 0);
+ if (sensor->irq < 0)
+ return sensor->irq;
+
+ ret = devm_request_threaded_irq(dev, sensor->irq,
+ NULL, st_thermal_thresh_int,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ DRIVER_NAME, sensor);
+ if (ret) {
+ dev_err(dev, "IRQ %d register failed\n", sensor->irq);
+ return ret;
+ }
+ return sensor->ops->enable_irq(sensor);
+}
+
+static int st_416mpe_enable_irq(struct st_thermal_sensor *sensor)
+{
+ int ret;
+
+ /* Set upper critical threshold */
+ ret = regmap_field_write(sensor->int_thresh_hi, sensor->data->crit_temp
+ + sensor->data->temp_adjust_val);
+ if (ret)
+ return ret;
+
+ return regmap_field_write(sensor->int_enable, 1);
+}
+
+static struct st_thermal_sensor_ops st_416mpe_sensor_ops = {
+ .power_ctrl = st_416mpe_power_ctrl,
+ .adjust_temp = st_416mpe_adjust_temp,
+ .alloc_regfields = st_416mpe_alloc_regfields,
+ .register_irq = st_416mpe_register_irq,
+ .enable_irq = st_416mpe_enable_irq,
+};
+
+/* Compatible device data for stih415 sas thermal sensor */
+static struct st_thermal_compat_data st_415sas_data = {
+ .reg_fields = &st_415sas_regfields[0],
+ .ops = &st_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = 20,
+ .crit_temp = 120,
+};
+
+/* Compatible device data for stih415 mpe thermal sensor */
+static struct st_thermal_compat_data st_415mpe_data = {
+ .reg_fields = &st_415mpe_regfields[0],
+ .ops = &st_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = 20,
+ .crit_temp = 120,
+};
+
+/* Compatible device data for stih416 sas thermal sensor */
+static struct st_thermal_compat_data st_416sas_data = {
+ .reg_fields = &st_416sas_regfields[0],
+ .ops = &st_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = 20,
+ .crit_temp = 120,
+};
+
+/* Compatible device data stih416 mpe thermal sensor */
+static struct st_thermal_compat_data st_416mpe_data = {
+ .reg_fields = &st_416mpe_regfields[0],
+ .ops = &st_416mpe_sensor_ops,
+ .calibration_val = 24,
+ .temp_adjust_val = 103,
+ .crit_temp = 120,
+};
+
+static struct of_device_id st_thermal_of_match[] = {
+ { .compatible = "st,stih415-sas-thermal",
+ .data = &st_415sas_data },
+ { .compatible = "st,stih415-mpe-thermal",
+ .data = &st_415mpe_data },
+ { .compatible = "st,stih416-sas-thermal",
+ .data = &st_416sas_data },
+ { .compatible = "st,stih416-mpe-thermal",
+ .data = &st_416mpe_data },
+ { /* sentinel */ }
+};
+
+static int st_thermal_probe_dt(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor_to_dev(sensor);
+ struct device_node *np = dev->of_node;
+
+ sensor->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(sensor->regmap)) {
+ dev_err(dev, "no syscfg phandle specified\n");
+ return PTR_ERR(sensor->regmap);
+ }
+
+ sensor->data = of_match_node(st_thermal_of_match, np)->data;
+ if (!sensor->data->ops)
+ return -EINVAL;
+
+ sensor->ops = sensor->data->ops;
+ return sensor->ops->alloc_regfields(sensor);
+}
+
+static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
+{
+ int ret;
+ struct device *dev = sensor_to_dev(sensor);
+
+ ret = clk_prepare_enable(sensor->clk);
+ if (ret) {
+ dev_err(dev, "unable to enable clk\n");
+ goto out;
+ }
+
+ ret = sensor->ops->power_ctrl(sensor, POWER_ON);
+ if (ret) {
+ dev_err(dev, "unable to power on sensor\n");
+ goto clk_dis;
+ }
+ return 0;
+clk_dis:
+ clk_disable_unprepare(sensor->clk);
+out:
+ return ret;
+}
+
+static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
+{
+ int ret;
+
+ ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(sensor->clk);
+ return 0;
+}
+
+/* Callback to get temperature from HW*/
+static int st_thermal_get_temp(struct thermal_zone_device *th,
+ unsigned long *temperature)
+{
+ struct st_thermal_sensor *sensor = thzone_to_sensor(th);
+ struct device *dev = sensor_to_dev(sensor);
+ unsigned int data;
+ unsigned int overflow;
+ int ret;
+
+ ret = regmap_field_read(sensor->overflow, &overflow);
+ if (ret)
+ return ret;
+ if (overflow)
+ return -EIO;
+
+ ret = regmap_field_read(sensor->temp_data, &data);
+ if (ret)
+ return ret;
+
+ data = sensor->ops->adjust_temp(sensor, data);
+ data = mcelsius(data);
+ dev_dbg(dev, "%s:temperature:%d\n", __func__, data);
+
+ *temperature = data;
+ return 0;
+}
+
+static int st_thermal_get_trip_type(struct thermal_zone_device *th,
+ int trip, enum thermal_trip_type *type)
+{
+ struct st_thermal_sensor *sensor = thzone_to_sensor(th);
+ struct device *dev = sensor_to_dev(sensor);
+
+ switch (trip) {
+ case 0:
+ *type = THERMAL_TRIP_CRITICAL;
+ break;
+ default:
+ dev_err(dev, "invalid trip point\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
+ int trip, unsigned long *temp)
+{
+ struct st_thermal_sensor *sensor = thzone_to_sensor(th);
+ struct device *dev = sensor_to_dev(sensor);
+
+ switch (trip) {
+ case 0:
+ *temp = mcelsius(sensor->data->crit_temp);
+ break;
+ default:
+ dev_err(dev, "Invalid trip point\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int st_thermal_notify(struct thermal_zone_device *th,
+ int trip, enum thermal_trip_type type)
+{
+ struct st_thermal_sensor *sensor = thzone_to_sensor(th);
+ struct device *dev = sensor_to_dev(sensor);
+
+ switch (type) {
+ case THERMAL_TRIP_CRITICAL:
+ /* TODO: Send event to user space */
+ dev_err(dev, "Critical temp reached:Going for shutdown\n");
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct thermal_zone_device_ops st_tz_ops = {
+ .get_temp = st_thermal_get_temp,
+ .get_trip_type = st_thermal_get_trip_type,
+ .get_trip_temp = st_thermal_get_trip_temp,
+ .notify = st_thermal_notify,
+};
+
+static int st_thermal_probe(struct platform_device *pdev)
+{
+ struct st_thermal_sensor *sensor;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+ unsigned int val;
+ static char start_banner[] __initdata =
+ "STMicroelectronics thermal sensor initialised\n";
+
+ if (!np) {
+ dev_err(dev, "device node not found\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sensor->pdev = pdev;
+ ret = st_thermal_probe_dt(sensor);
+ if (ret)
+ goto out;
+
+ sensor->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(sensor->clk)) {
+ dev_err(dev, "unable to get clk\n");
+ ret = PTR_ERR(sensor->clk);
+ goto out;
+ }
+ /* Activate thermal sensor */
+ ret = st_thermal_sensor_on(sensor);
+ if (ret) {
+ dev_err(dev, "unable to power on sensor\n");
+ goto out;
+ }
+
+ /* Check if sensor calibration data is already written */
+ ret = regmap_field_read(sensor->dcorrect, &val);
+ if (ret) {
+ dev_err(dev, "unable to read calibration data\n");
+ goto turn_off_exit;
+ }
+ if (val == 0) {
+ /* Sensor calibration value not set by bootloader,
+ * default calibration data to be used
+ */
+ ret = regmap_field_write(sensor->dcorrect,
+ sensor->data->calibration_val);
+ if (ret) {
+ dev_err(dev, "unable to set calibration data\n");
+ goto turn_off_exit;
+ }
+ }
+
+ sensor->th_dev = thermal_zone_device_register(
+ (char *)dev_name(dev), 1,
+ 0, (void *)sensor, &st_tz_ops,
+ NULL, 0, sensor->ops->register_irq ? 0 : 10000);
+
+ if (IS_ERR(sensor->th_dev)) {
+ dev_err(dev, "unable to register thermal zone device\n");
+ ret = PTR_ERR(sensor->th_dev);
+ goto turn_off_exit;
+ }
+
+ if (sensor->ops->register_irq) {
+ ret = sensor->ops->register_irq(sensor);
+ if (ret) {
+ dev_err(dev, "unable to register irq\n");
+ goto unregister_thzone;
+ }
+ }
+
+ platform_set_drvdata(pdev, sensor);
+ dev_info(dev, start_banner);
+ return 0;
+
+unregister_thzone:
+ thermal_zone_device_unregister(sensor->th_dev);
+turn_off_exit:
+ st_thermal_sensor_off(sensor);
+out:
+ return ret;
+}
+
+static int st_thermal_remove(struct platform_device *pdev)
+{
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ st_thermal_sensor_off(sensor);
+ thermal_zone_device_unregister(sensor->th_dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int st_thermal_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ return st_thermal_sensor_off(sensor);
+}
+
+static int st_thermal_resume(struct device *dev)
+{
+ int ret;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ ret = st_thermal_sensor_on(sensor);
+ if (ret)
+ return ret;
+
+ if (sensor->ops->enable_irq) {
+ ret = sensor->ops->enable_irq(sensor);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend,
+ st_thermal_resume);
+
+MODULE_DEVICE_TABLE(of, st_thermal_of_match);
+static struct platform_driver st_thermal_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = st_thermal_of_match,
+ .pm = &st_thermal_pm_ops,
+ },
+ .probe = st_thermal_probe,
+ .remove = st_thermal_remove,
+};
+
+module_platform_driver(st_thermal_driver);
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited");
+MODULE_DESCRIPTION("STMicroelectronics STIH41x SOC thermal sensor driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
