The dma descriptors are only initialized on the probe function.
If a packet is on the buffer when temac_stop is called, the dma
descriptors can be left on a incorrect status where no other package can
be sent.
So an interface could be left in an usable state after ifdow/ifup.
This patch makes sure that the descriptors are in a proper status when
the device is started.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.riba...@gmail.com>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c
b/drivers/net/ethernet/xilinx/ll_temac_main.c
index b88121f..8bae87f 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -229,6 +229,25 @@ static void temac_dma_bd_release(struct net_device *ndev)
}
/**
+ * temac_dma_bd_reset - Reset buffer descriptor rings
+ */
+static void temac_dma_bd_reset(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ int i;
+
+ for (i = 0; i < TX_BD_NUM; i++)
+ lp->tx_bd_v[i].app0 = 0;
+
+ lp->tx_bd_ci = 0;
+ lp->tx_bd_next = 0;
+ lp->tx_bd_tail = 0;
+ lp->rx_bd_ci = 0;
+
+ return;
+}
+
+/**
* temac_dma_bd_init - Setup buffer descriptor rings
*/
static int temac_dma_bd_init(struct net_device *ndev)
@@ -864,6 +883,8 @@ static int temac_open(struct net_device *ndev)
if (rc)
goto err_rx_irq;
+ temac_dma_bd_reset(ndev);
+
return 0;
err_rx_irq:
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
