On Wed, 27 Jun 2001, Jens Axboe wrote:
> On Wed, Jun 27 2001, Jeffrey W. Baker wrote:
> >
> > I will be happy to :) Should I hang conditional code off the existing
> > ioctl (CDROM_SELECT_SPEED, ide_cdrom_select_speed) or use a new one?
>
> Excellent. I'd say use the same ioctl if you can, but default to using
> SET_STREAMING for DVD drives.
Hrmm, ah, hrmm. Perhaps I need a little help with this one :)
Just for testing, I modified cdrom_select_speed in ide-cd.c to use SET
STREAMING. Working from the Fuji spec, I created a 28-byte buffer, set
the starting lba to 0, the ending lba to 0xffffffff, the read speed to
0x000000ff, and the read time to 0x000000ff, expecting a resulting speed
of 1KB/ms or 1000KB/s[1]. I assign the buffer to pc.buffer and send it on
its way to cdrom_queue_packet_command().
The result is:
CDROM_SELECT_SPEED failed: Input/output error
hdc: status timeout: status 0x80 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
Am I barking up the wrong tree? Do I need to use a different function,
or a generic command instead of a packet command?
Regards,
Jeffrey
[1] Interesting that there appears to be enough room in the spec for a
drive transferring 2^32 * 1000 KB/s.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
