Hi Stephen,
Thanks for the review.
On 10/11/2013 11:46 PM, Stephen Boyd wrote:
> On 10/11, Stanimir Varbanov wrote:
>> This adds Qualcomm PRNG driver device tree binding documentation
>> to use as an example in dts trees.
>>
>> Signed-off-by: Stanimir Varbanov <svarba...@mm-sol.com>
>> ---
>> Documentation/devicetree/bindings/rng/qcom,prng.txt | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/rng/qcom,prng.txt
>>
>> diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt
>> b/Documentation/devicetree/bindings/rng/qcom,prng.txt
>> new file mode 100644
>> index 000000000000..92be00085ab1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt
>> @@ -0,0 +1,17 @@
>> +Qualcomm MSM pseudo random number generator.
>> +
>> +Required properties:
>> +
>> +- compatible : should be "qcom,prng"
>> +- reg : specifies base physical address and size of the registers
>> map
>> +- clocks : phandle to clock-controller plus clock-specifier pair
>> +- clock-names : "prng" clocks all registers, FIFO and circuits in PRNG IP
>> block
>
> We're trying to keep to more generic names such as "core" for
> clocks like this. We've had problems in the past where hardware
> designers named the clock input after the name of the hardware
> and then the name of the hardware changed in the next version of
> the chip (although the hardware was mostly compatible with the
> previous version) and so they renamed the clock input. This
> leaked into the software drivers and we had horrible things like
> platform data for clock names. Sticking to "core" indicates what
> the clock does (i.e. it clocks the core PRNG hardware) while
> staying generic enough to prevent problems in the future if the
> block is renamed to something else. It might also help us in the
> future should our bus layer become smart enough to manage clocks
> for drivers without their knowing.
Thanks for the detailed explanation, I will rename the clock.
>
>> +
>> +Example:
>> +
>> + rng {
>
> It's good practice to add the unit address here, so rng@f9bff000.
I will follow the good practice, thanks.
>
>> + compatible = "qcom,prng";
>> + reg = <0xf9bff000 0x200>;
>> + clocks = <&clock GCC_PRNG_AHB_CLK>;
>> + clock-names = "prng";
>> + };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
