Hi Jim,
On Wed, Nov 13, 2013, at 08:52 AM, Jim Bos wrote:
> Have you looked at this sysfs-file, specifically tried this:
>
> echo lirc > /sys/class/rc/rc0/protocols
In short, yes.
atm, I've this udev rule,
cat /etc/udev/rules.d/70-infrared.rules
ACTION=="add", SUBSYSTEM=="rc",
RUN+="/usr/bin/ir-keytable --clear --protocol=LIRC
--write=/etc/rc_keymaps/my_streamzap_rpi"
which ensures after boot
ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event2) with:
Driver streamzap, table rc-streamzap
Supported protocols: LIRC
Enabled protocols: LIRC
Repeat delay = 500 ms, repeat period = 125 ms
which correlates to
cat /sys/class/rc/rc0/protocols
[lirc]
i.e., the same effect as the manual intervetion of
echo lirc > /sys/class/rc/rc0/protocols
nonetheless, that _alone_, does NOT 'do the trick'. if those MCE*
kernel mods are around, i.e., if I have NOT disabled them in the kernel
(re)compile, or, similarly, use the distro-provided kernel which
compiles the mods by default, then -- at boot -- the Streamzap is
recognized/assigned as an MCE keyboard/remote.
rand
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
