Normally, this problem associated with drives over 32GB or 127GB on a
controller that cannot support it.  It was not discussed here, I was
wondering if that is the problem, if it is not, what type of Hard Drive
is giving you these problems?

Thanks.


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Marcelo Tosatti
Sent: Tuesday, January 18, 2005 5:20 AM
To: Andries Brouwer
Cc: Mario Holbe; linux-kernel@vger.kernel.org
Subject: Re: 2.4: "access beyond end of device" after ext2 mount

On Tue, Jan 18, 2005 at 01:37:08PM +0100, Andries Brouwer wrote:
> On Tue, Jan 18, 2005 at 06:45:26AM -0200, Marcelo Tosatti wrote:
> 
> > > I suppose that what happens is the following:
> > > mounting sets the blocksize to 4096.
> > > After reading 9992360 sectors, reading the next block means
reading
> > > the next 8 sectors and that fails because only 6 sectors are left.
> > 
> > So this is either not a Linux error and not a disk error, its just
that the
> > "use with filesystem" then "direct access" is a unfortunate
combination.
> 
> It is not a disk error, but I consider it a Linux error.

OK.

> > What would be the correct fix for this for this, if any?
> 
> For 2.4 my reaction would be to say that it is a known property
> of the system, possibly less fortunate, an unimportant flaw.

This seems to be harmless, so, better do nothing about it.

> Of course a fix is possible if this is deemed important for some
reason.
> 
> > v2.6 should suffer from the same issues?
> 
> I don't think so. But 2.6 details are rather different.

OK!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to