On Thu, Dec 05, 2013 at 05:37:01PM +1100, dt.ta...@gmail.com wrote:
> From: Daniel Tang <dt.ta...@gmail.com>
>
> The device tree binding chosen for the nspire-usb driver was inappropriate and
> should be renamed to lsi,zevio-usb.
>
> References to nspire have been replaced with zevio (the SoC name)
>
> Signed-off-by: Daniel Tang <dt.ta...@gmail.com>
> ---
> .../devicetree/bindings/usb/ci-hdrc-nspire.txt | 17 -----
> .../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 +++++
> drivers/usb/chipidea/Makefile | 2 +-
> drivers/usb/chipidea/ci_hdrc_nspire.c | 72
> --------------------
> drivers/usb/chipidea/ci_hdrc_zevio.c | 72
> ++++++++++++++++++++
> 5 files changed, 90 insertions(+), 90 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
> delete mode 100644 drivers/usb/chipidea/ci_hdrc_nspire.c
> create mode 100644 drivers/usb/chipidea/ci_hdrc_zevio.c
>
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> deleted file mode 100644
> index ef1fcbf..0000000
> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -* TI-Nspire USB OTG Controller
> -
> -Required properties:
> -- compatible: Should be "lsi,nspire-usb"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain controller interrupt
> -
> -Recommended properies:
> -- vbus-supply: regulator for vbus
> -
> -Examples:
> - usb0: usb@B0000000 {
> - reg = <0xB0000000 0x1000>;
> - compatible = "lsi,nspire-usb";
> - interrupts = <8>;
> - vbus-supply = <&vbus_reg>;
> - };
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
> b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
> new file mode 100644
> index 0000000..b6c3b5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
> @@ -0,0 +1,17 @@
> +* TI-Nspire USB OTG Controller
> +
TI-Nspire is a platform which uses zevio SoC, correct?
So, please do not use TI-Nspire above.
Peter
> +Required properties:
> +- compatible: Should be "lsi,zevio-usb"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain controller interrupt
> +
> +Recommended properies:
> +- vbus-supply: regulator for vbus
> +
> +Examples:
> + usb0: usb@B0000000 {
> + reg = <0xB0000000 0x1000>;
> + compatible = "lsi,zevio-usb";
> + interrupts = <8>;
> + vbus-supply = <&vbus_reg>;
> + };
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 245ea4d..7635407 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -10,7 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
> # Glue/Bridge layers go here
>
> obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
> -obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_nspire.o
> +obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o
>
> # PCI doesn't provide stubs, need to check
> ifneq ($(CONFIG_PCI),)
> diff --git a/drivers/usb/chipidea/ci_hdrc_nspire.c
> b/drivers/usb/chipidea/ci_hdrc_nspire.c
> deleted file mode 100644
> index c5c2dde..0000000
> --- a/drivers/usb/chipidea/ci_hdrc_nspire.c
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -/*
> - * Copyright (C) 2013 Daniel Tang <tan...@tangrs.id.au>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2, as
> - * published by the Free Software Foundation.
> - *
> - * Based off drivers/usb/chipidea/ci_hdrc_msm.c
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/usb/gadget.h>
> -#include <linux/usb/chipidea.h>
> -
> -#include "ci.h"
> -
> -static struct ci_hdrc_platform_data ci_hdrc_nspire_platdata = {
> - .name = "ci_hdrc_nspire",
> - .flags = CI_HDRC_REGS_SHARED,
> - .capoffset = DEF_CAPOFFSET,
> -};
> -
> -static int ci_hdrc_nspire_probe(struct platform_device *pdev)
> -{
> - struct platform_device *ci_pdev;
> -
> - dev_dbg(&pdev->dev, "ci_hdrc_nspire_probe\n");
> -
> - ci_pdev = ci_hdrc_add_device(&pdev->dev,
> - pdev->resource, pdev->num_resources,
> - &ci_hdrc_nspire_platdata);
> -
> - if (IS_ERR(ci_pdev)) {
> - dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
> - return PTR_ERR(ci_pdev);
> - }
> -
> - platform_set_drvdata(pdev, ci_pdev);
> -
> - return 0;
> -}
> -
> -static int ci_hdrc_nspire_remove(struct platform_device *pdev)
> -{
> - struct platform_device *ci_pdev = platform_get_drvdata(pdev);
> -
> - ci_hdrc_remove_device(ci_pdev);
> -
> - return 0;
> -}
> -
> -static const struct of_device_id ci_hdrc_nspire_dt_ids[] = {
> - { .compatible = "lsi,nspire-usb", },
> - { /* sentinel */ }
> -};
> -
> -static struct platform_driver ci_hdrc_nspire_driver = {
> - .probe = ci_hdrc_nspire_probe,
> - .remove = ci_hdrc_nspire_remove,
> - .driver = {
> - .name = "nspire_usb",
> - .owner = THIS_MODULE,
> - .of_match_table = ci_hdrc_nspire_dt_ids,
> - },
> -};
> -
> -MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
> -module_platform_driver(ci_hdrc_nspire_driver);
> -
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c
> b/drivers/usb/chipidea/ci_hdrc_zevio.c
> new file mode 100644
> index 0000000..3bf6489
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
> @@ -0,0 +1,72 @@
> +/*
> + * Copyright (C) 2013 Daniel Tang <tan...@tangrs.id.au>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + *
> + * Based off drivers/usb/chipidea/ci_hdrc_msm.c
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/chipidea.h>
> +
> +#include "ci.h"
> +
> +static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
> + .name = "ci_hdrc_zevio",
> + .flags = CI_HDRC_REGS_SHARED,
> + .capoffset = DEF_CAPOFFSET,
> +};
> +
> +static int ci_hdrc_zevio_probe(struct platform_device *pdev)
> +{
> + struct platform_device *ci_pdev;
> +
> + dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n");
> +
> + ci_pdev = ci_hdrc_add_device(&pdev->dev,
> + pdev->resource, pdev->num_resources,
> + &ci_hdrc_zevio_platdata);
> +
> + if (IS_ERR(ci_pdev)) {
> + dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
> + return PTR_ERR(ci_pdev);
> + }
> +
> + platform_set_drvdata(pdev, ci_pdev);
> +
> + return 0;
> +}
> +
> +static int ci_hdrc_zevio_remove(struct platform_device *pdev)
> +{
> + struct platform_device *ci_pdev = platform_get_drvdata(pdev);
> +
> + ci_hdrc_remove_device(ci_pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ci_hdrc_zevio_dt_ids[] = {
> + { .compatible = "lsi,zevio-usb", },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver ci_hdrc_zevio_driver = {
> + .probe = ci_hdrc_zevio_probe,
> + .remove = ci_hdrc_zevio_remove,
> + .driver = {
> + .name = "zevio_usb",
> + .owner = THIS_MODULE,
> + .of_match_table = ci_hdrc_zevio_dt_ids,
> + },
> +};
> +
> +MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids);
> +module_platform_driver(ci_hdrc_zevio_driver);
> +
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.10.4
>
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
