Hello,

I have just booted 3.13-rc3 on my i.MX6DL board, done nothing but watch
it start, and I have got this!

Philippe

======================================================
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.13.0-rc3+ #4 Not tainted
------------------------------------------------------
ALSA device list:
  No soundcards found.
kworker/u4:0/6 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 (prepare_lock){+.+.+.}, at: [<804b55b4>] clk_prepare_lock+0x78/0xec

and this task is already holding:
 (&(&host->lock)->rlock){-.-...}, at: [<804941c4>] sdhci_do_set_ios+0x20/0x728
which would create a new lock dependency:
 (&(&host->lock)->rlock){-.-...} -> (prepare_lock){+.+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&host->lock)->rlock){-.-...}
... which became HARDIRQ-irq-safe at:
  [<8005f640>] mark_lock+0x15c/0x6d8
  [<8006069c>] __lock_acquire+0xae0/0x1cc8
  [<80061d9c>] lock_acquire+0x68/0x7c
  [<80650b64>] _raw_spin_lock+0x34/0x44
  [<8049679c>] sdhci_irq+0x24/0xa30
  [<8006b64c>] handle_irq_event_percpu+0x54/0x1a4
  [<8006b7e0>] handle_irq_event+0x44/0x64
  [<8006e928>] handle_fasteoi_irq+0xc4/0x15c
  [<8006afb0>] generic_handle_irq+0x28/0x38
  [<8000f1f4>] handle_IRQ+0x54/0xb4
  [<80008644>] gic_handle_irq+0x30/0x64
  [<80012f64>] __irq_svc+0x44/0x5c
  [<806488c0>] printk+0x3c/0x44
  [<80493e20>] sdhci_add_host+0x83c/0xbc0
  [<80498bcc>] sdhci_esdhc_imx_probe+0x324/0x548
  [<8035f480>] platform_drv_probe+0x20/0x50
  [<8035d8ac>] driver_probe_device+0x118/0x22c
  [<8035da5c>] __driver_attach+0x9c/0xa0
  [<8035bfa0>] bus_for_each_dev+0x5c/0x90
  [<8035d380>] driver_attach+0x20/0x28
  [<8035cf80>] bus_add_driver+0xe0/0x1d8
  [<8035e114>] driver_register+0x80/0xfc
  [<8035edcc>] __platform_driver_register+0x50/0x64
  [<808979c0>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<800088b8>] do_one_initcall+0x40/0x170
  [<80867c78>] kernel_init_freeable+0x104/0x1d4
  [<80644934>] kernel_init+0x10/0x118
  [<8000e988>] ret_from_fork+0x14/0x2c

to a HARDIRQ-irq-unsafe lock:
 (prepare_lock){+.+.+.}
... which became HARDIRQ-irq-unsafe at:
...  [<8005f640>] mark_lock+0x15c/0x6d8
  [<80062594>] mark_held_locks+0xa0/0x138
  [<800626dc>] trace_hardirqs_on_caller+0xb0/0x1cc
  [<8006280c>] trace_hardirqs_on+0x14/0x18
  [<8064daa8>] mutex_trylock+0x180/0x20c
  [<804b5550>] clk_prepare_lock+0x14/0xec
  [<804b5d34>] clk_notifier_register+0x2c/0xf0
  [<80015f84>] twd_clk_init+0x50/0x68
  [<800088b8>] do_one_initcall+0x40/0x170
  [<80867c78>] kernel_init_freeable+0x104/0x1d4
  [<80644934>] kernel_init+0x10/0x118
  [<8000e988>] ret_from_fork+0x14/0x2c

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(prepare_lock);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock);
                               lock(prepare_lock);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/u4:0/6:
 #0:  (kmmcd){.+.+.+}, at: [<8003ded4>] process_one_work+0x130/0x444
 #1:  ((&(&host->detect)->work)){+.+.+.}, at: [<8003ded4>] 
process_one_work+0x130/0x444
 #2:  (&(&host->lock)->rlock){-.-...}, at: [<804941c4>] 
sdhci_do_set_ios+0x20/0x728

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&host->lock)->rlock){-.-...} ops: 410 {
   IN-HARDIRQ-W at:
                    [<8005f640>] mark_lock+0x15c/0x6d8
                    [<8006069c>] __lock_acquire+0xae0/0x1cc8
                    [<80061d9c>] lock_acquire+0x68/0x7c
                    [<80650b64>] _raw_spin_lock+0x34/0x44
                    [<8049679c>] sdhci_irq+0x24/0xa30
                    [<8006b64c>] handle_irq_event_percpu+0x54/0x1a4
                    [<8006b7e0>] handle_irq_event+0x44/0x64
                    [<8006e928>] handle_fasteoi_irq+0xc4/0x15c
                    [<8006afb0>] generic_handle_irq+0x28/0x38
                    [<8000f1f4>] handle_IRQ+0x54/0xb4
                    [<80008644>] gic_handle_irq+0x30/0x64
                    [<80012f64>] __irq_svc+0x44/0x5c
                    [<806488c0>] printk+0x3c/0x44
                    [<80493e20>] sdhci_add_host+0x83c/0xbc0
                    [<80498bcc>] sdhci_esdhc_imx_probe+0x324/0x548
                    [<8035f480>] platform_drv_probe+0x20/0x50
                    [<8035d8ac>] driver_probe_device+0x118/0x22c
                    [<8035da5c>] __driver_attach+0x9c/0xa0
                    [<8035bfa0>] bus_for_each_dev+0x5c/0x90
                    [<8035d380>] driver_attach+0x20/0x28
                    [<8035cf80>] bus_add_driver+0xe0/0x1d8
                    [<8035e114>] driver_register+0x80/0xfc
                    [<8035edcc>] __platform_driver_register+0x50/0x64
                    [<808979c0>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<800088b8>] do_one_initcall+0x40/0x170
                    [<80867c78>] kernel_init_freeable+0x104/0x1d4
                    [<80644934>] kernel_init+0x10/0x118
                    [<8000e988>] ret_from_fork+0x14/0x2c
   IN-SOFTIRQ-W at:
                    [<8005f640>] mark_lock+0x15c/0x6d8
                    [<800601b4>] __lock_acquire+0x5f8/0x1cc8
                    [<80061d9c>] lock_acquire+0x68/0x7c
                    [<80650c44>] _raw_spin_lock_irqsave+0x4c/0x60
                    [<80492f54>] sdhci_tasklet_finish+0x1c/0x120
                    [<8002bb24>] tasklet_action+0x90/0x14c
                    [<8002c07c>] __do_softirq+0x100/0x254
                    [<8002c5a4>] irq_exit+0xb0/0x108
                    [<8000f1f8>] handle_IRQ+0x58/0xb4
                    [<80008644>] gic_handle_irq+0x30/0x64
                    [<80012f64>] __irq_svc+0x44/0x5c
                    [<806488c0>] printk+0x3c/0x44
                    [<80493e20>] sdhci_add_host+0x83c/0xbc0
                    [<80498bcc>] sdhci_esdhc_imx_probe+0x324/0x548
                    [<8035f480>] platform_drv_probe+0x20/0x50
                    [<8035d8ac>] driver_probe_device+0x118/0x22c
                    [<8035da5c>] __driver_attach+0x9c/0xa0
                    [<8035bfa0>] bus_for_each_dev+0x5c/0x90
                    [<8035d380>] driver_attach+0x20/0x28
                    [<8035cf80>] bus_add_driver+0xe0/0x1d8
                    [<8035e114>] driver_register+0x80/0xfc
                    [<8035edcc>] __platform_driver_register+0x50/0x64
                    [<808979c0>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<800088b8>] do_one_initcall+0x40/0x170
                    [<80867c78>] kernel_init_freeable+0x104/0x1d4
                    [<80644934>] kernel_init+0x10/0x118
                    [<8000e988>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f640>] mark_lock+0x15c/0x6d8
                   [<8005fee0>] __lock_acquire+0x324/0x1cc8
                   [<80061d9c>] lock_acquire+0x68/0x7c
                   [<80650c44>] _raw_spin_lock_irqsave+0x4c/0x60
                   [<804941c4>] sdhci_do_set_ios+0x20/0x728
                   [<804948f4>] sdhci_set_ios+0x28/0x34
                   [<80481680>] mmc_power_up+0x6c/0xd0
                   [<804823d8>] mmc_start_host+0x40/0x70
                   [<804833f0>] mmc_add_host+0x60/0x88
                   [<80493dd4>] sdhci_add_host+0x7f0/0xbc0
                   [<80498bcc>] sdhci_esdhc_imx_probe+0x324/0x548
                   [<8035f480>] platform_drv_probe+0x20/0x50
                   [<8035d8ac>] driver_probe_device+0x118/0x22c
                   [<8035da5c>] __driver_attach+0x9c/0xa0
                   [<8035bfa0>] bus_for_each_dev+0x5c/0x90
                   [<8035d380>] driver_attach+0x20/0x28
                   [<8035cf80>] bus_add_driver+0xe0/0x1d8
                   [<8035e114>] driver_register+0x80/0xfc
                   [<8035edcc>] __platform_driver_register+0x50/0x64
                   [<808979c0>] sdhci_esdhc_imx_driver_init+0x18/0x20
                   [<800088b8>] do_one_initcall+0x40/0x170
                   [<80867c78>] kernel_init_freeable+0x104/0x1d4
                   [<80644934>] kernel_init+0x10/0x118
                   [<8000e988>] ret_from_fork+0x14/0x2c
 }
 ... key      at: [<80e517cc>] __key.24069+0x0/0x8
 ... acquired at:
   [<8005f13c>] check_usage+0x3e8/0x5f4
   [<8005f3a0>] check_irq_usage+0x58/0xb4
   [<80060ce0>] __lock_acquire+0x1124/0x1cc8
   [<80061d9c>] lock_acquire+0x68/0x7c
   [<8064f57c>] mutex_lock_nested+0x5c/0x3b4
   [<804b55b4>] clk_prepare_lock+0x78/0xec
   [<804b5fc8>] clk_get_rate+0x14/0x64
   [<80497c74>] esdhc_pltfm_set_clock+0x20/0x2a8
   [<80492b60>] sdhci_set_clock+0x4c/0x424
   [<804944b8>] sdhci_do_set_ios+0x314/0x728
   [<804948f4>] sdhci_set_ios+0x28/0x34
   [<80481560>] mmc_set_bus_mode+0x20/0x24
   [<804858d4>] mmc_attach_mmc+0x140/0x1a0
   [<80482348>] mmc_rescan+0x28c/0x2dc
   [<8003df48>] process_one_work+0x1a4/0x444
   [<8003ec7c>] worker_thread+0x120/0x3e4
   [<8004539c>] kthread+0xcc/0xe8
   [<8000e988>] ret_from_fork+0x14/0x2c


the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock:
-> (prepare_lock){+.+.+.} ops: 337 {
   HARDIRQ-ON-W at:
                    [<8005f640>] mark_lock+0x15c/0x6d8
                    [<80062594>] mark_held_locks+0xa0/0x138
                    [<800626dc>] trace_hardirqs_on_caller+0xb0/0x1cc
                    [<8006280c>] trace_hardirqs_on+0x14/0x18
                    [<8064daa8>] mutex_trylock+0x180/0x20c
                    [<804b5550>] clk_prepare_lock+0x14/0xec
                    [<804b5d34>] clk_notifier_register+0x2c/0xf0
                    [<80015f84>] twd_clk_init+0x50/0x68
                    [<800088b8>] do_one_initcall+0x40/0x170
                    [<80867c78>] kernel_init_freeable+0x104/0x1d4
                    [<80644934>] kernel_init+0x10/0x118
                    [<8000e988>] ret_from_fork+0x14/0x2c
   SOFTIRQ-ON-W at:
                    [<8005f640>] mark_lock+0x15c/0x6d8
                    [<80062594>] mark_held_locks+0xa0/0x138
                    [<80062720>] trace_hardirqs_on_caller+0xf4/0x1cc
                    [<8006280c>] trace_hardirqs_on+0x14/0x18
                    [<8064daa8>] mutex_trylock+0x180/0x20c
                    [<804b5550>] clk_prepare_lock+0x14/0xec
                    [<804b5d34>] clk_notifier_register+0x2c/0xf0
                    [<80015f84>] twd_clk_init+0x50/0x68
                    [<800088b8>] do_one_initcall+0x40/0x170
                    [<80867c78>] kernel_init_freeable+0x104/0x1d4
                    [<80644934>] kernel_init+0x10/0x118
                    [<8000e988>] ret_from_fork+0x14/0x2c
   RECLAIM_FS-ON-W at:
                       [<8005f640>] mark_lock+0x15c/0x6d8
                       [<80062594>] mark_held_locks+0xa0/0x138
                       [<80062dd8>] lockdep_trace_alloc+0x90/0x110
                       [<800a8bf4>] __alloc_pages_nodemask+0x70/0x84c
                       [<800d7558>] new_slab+0x6c/0x270
                       [<80649880>] 
__slab_alloc.isra.71.constprop.73+0x3b8/0x504
                       [<800d83d4>] kmem_cache_alloc+0x120/0x12c
                       [<800f380c>] __d_alloc+0x24/0x180
                       [<800f3b6c>] d_alloc+0x18/0x68
                       [<800e652c>] lookup_dcache+0x8c/0xb0
                       [<800e6570>] __lookup_hash+0x20/0x4c
                       [<800eb344>] lookup_one_len+0xcc/0x120
                       [<80256fc4>] __create_file+0x74/0x214
                       [<80257238>] debugfs_create_file+0x30/0x38
                       [<80257ffc>] debugfs_create_u32+0x44/0x54
                       [<804b65d4>] clk_debug_create_subtree+0x98/0x11c
                       [<804b6614>] clk_debug_create_subtree+0xd8/0x11c
                       [<80898fb4>] clk_debug_init+0xac/0x13c
                       [<800088b8>] do_one_initcall+0x40/0x170
                       [<80867c78>] kernel_init_freeable+0x104/0x1d4
                       [<80644934>] kernel_init+0x10/0x118
                       [<8000e988>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f640>] mark_lock+0x15c/0x6d8
                   [<8005fee0>] __lock_acquire+0x324/0x1cc8
                   [<80061d9c>] lock_acquire+0x68/0x7c
                   [<8064da38>] mutex_trylock+0x110/0x20c
                   [<804b5550>] clk_prepare_lock+0x14/0xec
                   [<804b7548>] __clk_init+0x20/0x458
                   [<804b7a50>] _clk_register+0xd0/0x168
                   [<804b7b98>] clk_register+0x3c/0x88
                   [<804b857c>] clk_register_fixed_rate+0x88/0xd4
                   [<804b8630>] of_fixed_clk_setup+0x68/0x90
                   [<80899088>] of_clk_init+0x44/0x6c
                   [<8086b2c8>] time_init+0x2c/0x38
                   [<808679f0>] start_kernel+0x1dc/0x360
                   [<10008074>] 0x10008074
 }
 ... key      at: [<808fd198>] prepare_lock+0x38/0x48
 ... acquired at:
   [<8005f170>] check_usage+0x41c/0x5f4
   [<8005f3a0>] check_irq_usage+0x58/0xb4
   [<80060ce0>] __lock_acquire+0x1124/0x1cc8
   [<80061d9c>] lock_acquire+0x68/0x7c
   [<8064f57c>] mutex_lock_nested+0x5c/0x3b4
   [<804b55b4>] clk_prepare_lock+0x78/0xec
   [<804b5fc8>] clk_get_rate+0x14/0x64
   [<80497c74>] esdhc_pltfm_set_clock+0x20/0x2a8
   [<80492b60>] sdhci_set_clock+0x4c/0x424
   [<804944b8>] sdhci_do_set_ios+0x314/0x728
   [<804948f4>] sdhci_set_ios+0x28/0x34
   [<80481560>] mmc_set_bus_mode+0x20/0x24
   [<804858d4>] mmc_attach_mmc+0x140/0x1a0
   [<80482348>] mmc_rescan+0x28c/0x2dc
   [<8003df48>] process_one_work+0x1a4/0x444
   [<8003ec7c>] worker_thread+0x120/0x3e4
   [<8004539c>] kthread+0xcc/0xe8
   [<8000e988>] ret_from_fork+0x14/0x2c


stack backtrace:
CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.13.0-rc3+ #4
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012218>] (dump_backtrace+0x0/0x10c) from [<800123b8>] (show_stack+0x18/0x1c)
 r6:00000000 r5:809c53f0 r4:00000000 r3:bf872d00
[<800123a0>] (show_stack+0x0/0x1c) from [<8064a720>] (dump_stack+0x78/0x94)
[<8064a6a8>] (dump_stack+0x0/0x94) from [<8005f190>] (check_usage+0x43c/0x5f4)
 r4:00000001 r3:bf872d00
[<8005ed54>] (check_usage+0x0/0x5f4) from [<8005f3a0>] 
(check_irq_usage+0x58/0xb4)
[<8005f348>] (check_irq_usage+0x0/0xb4) from [<80060ce0>] 
(__lock_acquire+0x1124/0x1cc8)
 r8:bf8730e8 r7:809c53f0 r6:80e46a54 r5:bf8730d0 r4:00000003
[<8005fbbc>] (__lock_acquire+0x0/0x1cc8) from [<80061d9c>] 
(lock_acquire+0x68/0x7c)
[<80061d34>] (lock_acquire+0x0/0x7c) from [<8064f57c>] 
(mutex_lock_nested+0x5c/0x3b4)
 r7:00000000 r6:80dfc7bc r5:804b55b4 r4:808fd160
[<8064f520>] (mutex_lock_nested+0x0/0x3b4) from [<804b55b4>] 
(clk_prepare_lock+0x78/0xec)
[<804b553c>] (clk_prepare_lock+0x0/0xec) from [<804b5fc8>] 
(clk_get_rate+0x14/0x64)
 r6:bf020c40 r5:000186a0 r4:bf828380 r3:80497c54
[<804b5fb4>] (clk_get_rate+0x0/0x64) from [<80497c74>] 
(esdhc_pltfm_set_clock+0x20/0x2a8)
 r5:000186a0 r4:bf020c40
[<80497c54>] (esdhc_pltfm_set_clock+0x0/0x2a8) from [<80492b60>] 
(sdhci_set_clock+0x4c/0x424)
[<80492b14>] (sdhci_set_clock+0x0/0x424) from [<804944b8>] 
(sdhci_do_set_ios+0x314/0x728)
[<804941a4>] (sdhci_do_set_ios+0x0/0x728) from [<804948f4>] 
(sdhci_set_ios+0x28/0x34)
[<804948cc>] (sdhci_set_ios+0x0/0x34) from [<80481560>] 
(mmc_set_bus_mode+0x20/0x24)
 r5:806947d0 r4:bf020800
[<80481540>] (mmc_set_bus_mode+0x0/0x24) from [<804858d4>] 
(mmc_attach_mmc+0x140/0x1a0)
[<80485794>] (mmc_attach_mmc+0x0/0x1a0) from [<80482348>] 
(mmc_rescan+0x28c/0x2dc)
 r5:806947d0 r4:bf020af8
[<804820bc>] (mmc_rescan+0x0/0x2dc) from [<8003df48>] 
(process_one_work+0x1a4/0x444)
 r7:bf9bc100 r6:bf80dc00 r5:bf020af8 r4:bf82d880
[<8003dda4>] (process_one_work+0x0/0x444) from [<8003ec7c>] 
(worker_thread+0x120/0x3e4)
[<8003eb5c>] (worker_thread+0x0/0x3e4) from [<8004539c>] (kthread+0xcc/0xe8)
[<800452d0>] (kthread+0x0/0xe8) from [<8000e988>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:800452d0 r4:bf840580
mmc2: BKOPS_EN bit is not set
mmc2: new high speed MMC card at address 0001

-- 
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to