On Thursday 12 December 2013 06:56 PM, Matt Porter wrote:
> Adds support for querying the phy bus width from the generic phy
> subsystem. Configure UTMI bus width in GUSBCFG based on this value.
> 
> Signed-off-by: Matt Porter <mpor...@linaro.org>
Acked-by: Kishon Vijay Abraham I <kis...@ti.com>
> ---
>  drivers/usb/gadget/s3c-hsotg.c | 14 +++++++++++++-
>  drivers/usb/gadget/s3c-hsotg.h |  1 +
>  2 files changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
> index e9683c2..168aaa9 100644
> --- a/drivers/usb/gadget/s3c-hsotg.c
> +++ b/drivers/usb/gadget/s3c-hsotg.c
> @@ -144,6 +144,7 @@ struct s3c_hsotg_ep {
>   * @regs: The memory area mapped for accessing registers.
>   * @irq: The IRQ number we are using
>   * @supplies: Definition of USB power supplies
> + * @phyif: PHY interface width
>   * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
>   * @num_of_eps: Number of available EPs (excluding EP0)
>   * @debug_root: root directrory for debugfs.
> @@ -171,6 +172,7 @@ struct s3c_hsotg {
>  
>       struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
>  
> +     u32                     phyif;
>       unsigned int            dedicated_fifos:1;
>       unsigned char           num_of_eps;
>  
> @@ -2276,7 +2278,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
>        */
>  
>       /* set the PLL on, remove the HNP/SRP and set the PHY */
> -     writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
> +     writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
>              (0x5 << 10), hsotg->regs + GUSBCFG);
>  
>       s3c_hsotg_init_fifo(hsotg);
> @@ -3621,6 +3623,16 @@ static int s3c_hsotg_probe(struct platform_device 
> *pdev)
>               goto err_supplies;
>       }
>  
> +     /* Set default UTMI width */
> +     hsotg->phyif = GUSBCFG_PHYIf16;
> +
> +     /*
> +      * If using the generic PHY framework, check if the PHY bus
> +      * width is 8-bit and set the phyif appropriately.
> +      */
> +     if (hsotg->phy && (phy_get_bus_width(phy) == 8))
> +             hsotg->phyif = GUSBCFG_PHYIf8;
> +
>       if (hsotg->phy)
>               phy_init(hsotg->phy);
>  
> diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h
> index d650b12..85f549f 100644
> --- a/drivers/usb/gadget/s3c-hsotg.h
> +++ b/drivers/usb/gadget/s3c-hsotg.h
> @@ -55,6 +55,7 @@
>  #define GUSBCFG_HNPCap                               (1 << 9)
>  #define GUSBCFG_SRPCap                               (1 << 8)
>  #define GUSBCFG_PHYIf16                      (1 << 3)
> +#define GUSBCFG_PHYIf8                               (0 << 3)
>  #define GUSBCFG_TOutCal_MASK                 (0x7 << 0)
>  #define GUSBCFG_TOutCal_SHIFT                        (0)
>  #define GUSBCFG_TOutCal_LIMIT                        (0x7)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to