On Mon, Dec 16, 2013 at 1:36 PM, Yinghai Lu <ying...@kernel.org> wrote:
> On Mon, Dec 16, 2013 at 10:13 AM, Yinghai Lu <ying...@kernel.org> wrote:
>>>
>>> 64-bit non-prefetchable BARs are missed from caculation in the scheme,
>>> causing assign failed eventually.

>>>
>>> Will you figure out a better way to cover them or just add a 'type3' 
>>> parameter?
>
> Looks like we have add type3 for that case.

please check attached delta patch.

Thanks

Yinghai
---
 drivers/pci/setup-bus.c |   17 +++++++++++------
 drivers/pci/setup-res.c |    8 ++++++--
 2 files changed, 17 insertions(+), 8 deletions(-)

Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -916,6 +916,7 @@ static inline resource_size_t calculate_
  */
 static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			 unsigned long type, unsigned long type2,
+			 unsigned long type3,
 			 resource_size_t min_size, resource_size_t add_size,
 			 struct list_head *realloc_head)
 {
@@ -946,7 +947,8 @@ static int pbus_size_mem(struct pci_bus
 			resource_size_t r_size;
 
 			if (r->parent || ((r->flags & mask) != type &&
-					  (r->flags & mask) != type2))
+					  (r->flags & mask) != type2 &&
+					  (r->flags & mask) != type3))
 				continue;
 			r_size = resource_size(r);
 #ifdef CONFIG_PCI_IOV
@@ -1119,7 +1121,7 @@ void __ref __pci_bus_size_bridges(struct
 			struct list_head *realloc_head)
 {
 	struct pci_dev *dev;
-	unsigned long mask, prefmask, type2 = 0;
+	unsigned long mask, prefmask, type2 = 0, type3 = 0;
 	resource_size_t additional_mem_size = 0, additional_io_size = 0;
 	struct resource *b_res;
 
@@ -1171,26 +1173,29 @@ void __ref __pci_bus_size_bridges(struct
 		prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		if (b_res[2].flags & IORESOURCE_MEM_64) {
 			prefmask |= IORESOURCE_MEM_64;
-			if (pbus_size_mem(bus, prefmask, prefmask, prefmask,
+			if (pbus_size_mem(bus, prefmask, prefmask,
+				  prefmask, prefmask,
 				  realloc_head ? 0 : additional_mem_size,
 				  additional_mem_size, realloc_head)) {
 					/* Success, size non-pref64 only. */
 					mask = prefmask;
 					type2 = prefmask & ~IORESOURCE_MEM_64;
+					type3 = prefmask & ~IORESOURCE_PREFETCH;
 			}
 		}
 		if (!type2) {
 			prefmask &= ~IORESOURCE_MEM_64;
-			if (pbus_size_mem(bus, prefmask, prefmask, prefmask,
+			if (pbus_size_mem(bus, prefmask, prefmask,
+					 prefmask, prefmask,
 					 realloc_head ? 0 : additional_mem_size,
 					 additional_mem_size, realloc_head)) {
 				/* Success, size non-prefetch only. */
 				mask = prefmask;
 			} else
 				additional_mem_size += additional_mem_size;
-			type2 = IORESOURCE_MEM;
+			type2 = type3 = IORESOURCE_MEM;
 		}
-		pbus_size_mem(bus, mask, IORESOURCE_MEM, type2,
+		pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
 				realloc_head ? 0 : additional_mem_size,
 				additional_mem_size, realloc_head);
 		break;
Index: linux-2.6/drivers/pci/setup-res.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-res.c
+++ linux-2.6/drivers/pci/setup-res.c
@@ -212,7 +212,8 @@ static int __pci_assign_resource(struct
 				     pcibios_align_resource, dev);
 
 	if (ret < 0 &&
-	    (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64))) {
+	    (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) ==
+	     (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) {
 		/*
 		 * That failed.
 		 *
@@ -223,12 +224,15 @@ static int __pci_assign_resource(struct
 					     pcibios_align_resource, dev);
 	}
 
-	if (ret < 0 && (res->flags & IORESOURCE_PREFETCH)) {
+	if (ret < 0 &&
+	    (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64))) {
 		/*
 		 * That failed.
 		 *
 		 * But a prefetching area can handle a non-prefetching
 		 * window (it will just not perform as well).
+		 *
+		 * Also can put 64bit under 32bit range. (below 4g).
 		 */
 		ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
 					     pcibios_align_resource, dev);

Reply via email to