Hi Markus,
On Tuesday, January 21, 2014 06:24 PM, Markus Pargmann wrote:
Hi,
On Thu, Jan 16, 2014 at 09:18:23AM +0800, Chris Ruehl wrote:
The offset to ICONFB was incorrect, this patch set the correct value 0x14.
dev_dbg in function imx1_write_2bit print the wrong address and had been
moved after address calculation.
Signed-off-by: Chris Ruehl <[email protected]>
Reviewed-by: Markus Pargmann <[email protected]>
Perhaps this should go to the stable tree too for 3.13 and 3.14?
Yes of cause, and I have one more, the offset in
@@ -139,7 +139,7 @@ static int imx1_read_2bit(struct imx1_pinctrl *ipctl,
unsigned int pin_id,
u32 reg_offset)
{
void __iomem *reg = imx1_mem(ipctl, pin_id) + reg_offset;
- int offset = pin_id % 16;
+ int offset = (pin_id % 16) * 2;
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
should fixed, otherwise the printout of
/sys/kernel/debug/pinctrl/10015000.iomuxc/pins show prints the wrong confo /
iconfa / iconfb
I prepare a patch.
With kind regards,
Chris
Regards,
Markus
---
drivers/pinctrl/pinctrl-imx1-core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-imx1-core.c
b/drivers/pinctrl/pinctrl-imx1-core.c
index f77914a..8dfc3dc 100644
--- a/drivers/pinctrl/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/pinctrl-imx1-core.c
@@ -45,7 +45,7 @@ struct imx1_pinctrl {
#define MX1_DDIR 0x00
#define MX1_OCR 0x04
#define MX1_ICONFA 0x0c
-#define MX1_ICONFB 0x10
+#define MX1_ICONFB 0x14
#define MX1_GIUS 0x20
#define MX1_GPR 0x38
#define MX1_PUEN 0x40
@@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl,
unsigned int pin_id,
u32 old_val;
u32 new_val;
- dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
- reg, offset, value);
-
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
reg += 0x04;
+ dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
+ reg, offset, value);
+
/* Get current state of pins */
old_val = readl(reg);
old_val &= mask;
--
1.7.10.4
--
GTSYS Limited RFID Technology
A01 24/F Gold King Industrial Bld
35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong
Fax (852) 8167 4060 - Tel (852) 3598 9488
Disclaimer: http://www.gtsys.com.hk/email/classified.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
