Add documentation for new bindings for controlling (enable/disable) the
Buck9 Converter by GPIO (BUCK9EN).
Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Cc: Kyungmin Park <kyungmin.p...@samsung.com>
Cc: Marek Szyprowski <m.szyprow...@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
---
.../bindings/regulator/s5m8767-regulator.txt | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index fc6b38f035bd..b52ee77dc4c0 100644
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -69,13 +69,18 @@ sub-node should be of the format as listed below.
};
};
The above regulator entries are defined in regulator bindings documentation
-except op_mode description.
+except these properties:
- op_mode: describes the different operating modes of the LDO's with
power mode change in SOC. The different possible values are,
0 - always off mode
1 - on in normal mode
2 - low power mode
3 - suspend mode
+ - s5m8767,pmic-ext-control-enable: regulator can be enabled/disabled
+ by GPIO (valid only for buck9).
+ - s5m8767,pmic-ext-control-gpio: GPIO specifier for one GPIO
+ controlling this regulator (valid only for buck9).
+ This property is required when
's5m8767,pmic-ext-control-enable' is specified.
The following are the names of the regulators that the s5m8767 pmic block
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
@@ -148,5 +153,14 @@ Example:
regulator-always-on;
regulator-boot-on;
};
+
+ vemmc_reg: BUCK9 {
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>; /* Standby Mode */
+ s5m8767,pmic-ext-control-enable;
+ s5m8767,pmic-ext-control-gpio = <&gpk0 2 0>;
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
