On Friday, February 07, 2014 12:27:03 AM you wrote: [...] > [ 49.170694] video LNXVIDEO:01: Restoring backlight state > [ 49.644845] ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported > [ 49.646671] jme 0000:04:00.5: irq 50 for MSI/MSI-X > [ 49.671645] jme 0000:04:00.5 eth0: Link is down
Well, this means that Ethernet device is present after the resume. > [ 49.671717] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 49.674119] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S > [ 49.681037] iwlwifi 0000:05:00.0: Radio type=0x1-0x3-0x1 > [ 49.778035] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 49.806241] xhci_hcd 0000:02:00.0: no hotplug settings from platform > [ 49.859417] iwlwifi 0000:05:00.0: no hotplug settings from platform > [ 56.264694] wlan0: authenticate with [STRIPPED] > [ 56.277969] wlan0: send auth to [STRIPPED] (try 1/3) > [ 56.282076] wlan0: authenticated > [ 56.283879] wlan0: associate with [STRIPPED] (try 1/3) > [ 56.297196] wlan0: RX AssocResp from [STRIPPED] (capab=0x411 status=0 > aid=6) > [ 56.303746] wlan0: associated > [ 56.303826] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Can you check the lspci differences between before/after the suspend-resume cycle? -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/