On 11 February 2014 10:27, Roger <rogera...@realtek.com> wrote:
> On 02/10/2014 10:58 PM, Ulf Hansson wrote:
>>
>> On 6 February 2014 15:35, <rogera...@realtek.com> wrote:
>>>
>>> From: Roger Tseng <rogera...@realtek.com>
>>>
>>> Realtek USB SD/MMC host driver provides mmc host support based on the
>>> Realtek
>>> USB card reader MFD driver.
>>>
>>> Signed-off-by: Roger Tseng <rogera...@realtek.com>
>>> ---
>>> drivers/mmc/host/Kconfig | 7 +
>>> drivers/mmc/host/Makefile | 1 +
>>> drivers/mmc/host/rtsx_usb_sdmmc.c | 1500
>>> +++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1508 insertions(+)
>>> create mode 100644 drivers/mmc/host/rtsx_usb_sdmmc.c
>
> [snip]
>
>>> +#ifdef CONFIG_PM_RUNTIME
>>
>>
>> There are stubs for pm_runtime* functions, thus the ifdefs can be removed.
>> Please go though the complete patch and remove all instances.
>>
>>> + pm_runtime_put(sdmmc_dev(host));
>>
>>
>> I don't know so much about USB mmc hosts hardware, but I just wanted
>> to find out if I have understood this correct.
>>
>> You can't do fine grained power management of the USB parent device,
>> since it needs to be runtime resumed to be able keep the power the
>> card? Once it becomes runtime suspended, the power to the card will
>> thus also be dropped?
>>
> Yes, and to keep some internal state of the controller.
Okay.
But the internal state of the controller should be possible to restore
at runtime_resume, so that should not be the reason, right?
>
> [snip]
>
>>> +#ifdef CONFIG_PM
>>
>>
>> I suppose this should be CONFIG_PM_SLEEP?
>>
> ...
>
>>> + err = mmc_suspend_host(mmc);
>>
>>
>> This won't compile. The mmc_suspend_host API has been removed.
>>
> ...
>
>>> + return mmc_resume_host(mmc);
>>
>>
>> This won't compile. The mmc_resume_host API has been removed.
>>
> ...
>>>
>>> +static struct platform_driver rtsx_usb_sdmmc_driver = {
>>> + .probe = rtsx_usb_sdmmc_drv_probe,
>>> + .remove = rtsx_usb_sdmmc_drv_remove,
>>> + .id_table = rtsx_usb_sdmmc_ids,
>>> + .suspend = rtsx_usb_sdmmc_suspend,
>>> + .resume = rtsx_usb_sdmmc_resume,
>>
>>
>> Please use the modern pm_ops instead of the legacy suspend/resume
>> callbacks.
>> I suggest you then also switch to use the SIMPLE_DEV_PM_OPS macro.
>
>
> I just missed the removal of mmc_suspend|resume_host.
>
> I'll remove all these unnecessary mmc host pm things as done in commit
> ff71c4bcb0af2730d047989e485303ae4e1ce794 for drivers of our PCIe devices.
>
> Thanks for pointing this out.
>
>> Kind regards
>> Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
