On Tuesday 11 February 2014 03:00 PM, Mohit Kumar wrote:
> From: Pratyush Anand <pratyush.an...@st.com>
>
> SPEAr1310 and SPEAr1340 uses miphy40lp phy for PCIe. This driver adds
> support for the same.
What's up with SATA support for SPEAr1310? Do you have plans of adding it soon?
>
> Signed-off-by: Pratyush Anand <pratyush.an...@st.com>
> Tested-by: Mohit Kumar <mohit.ku...@st.com>
> Cc: Arnd Bergmann <a...@arndb.de>
> Cc: Viresh Kumar <viresh.li...@gmail.com>
> Cc: Kishon Vijay Abraham I <kis...@ti.com>
> Cc: spear-de...@list.st.com
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/phy/phy-miphy40lp.c | 165
> +++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 165 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/phy/phy-miphy40lp.c b/drivers/phy/phy-miphy40lp.c
> index 16da55b..dec67ed 100644
> --- a/drivers/phy/phy-miphy40lp.c
> +++ b/drivers/phy/phy-miphy40lp.c
> @@ -9,6 +9,7 @@
> * published by the Free Software Foundation.
> *
> * 04/02/2014: Adding support of SATA mode for SPEAr1340.
> + * 04/02/2014: Adding support of PCIe mode for SPEAr1340 and SPEAr1310
> */
>
> #include <linux/bitops.h>
> @@ -74,6 +75,80 @@
> #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
> (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
> SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
> +/* SPEAr1310 Registers */
> +#define SPEAR1310_PCIE_SATA_CFG 0x3A4
> + #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
> + #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
> + #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
> + #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
> + #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
> + #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
> + #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
> + #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
> + #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
> + #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
> + #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
> + #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
> + #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
> + #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
> + #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
> + #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
> + #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
> + #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
> + #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
> + #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
> + #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
> + #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
> + #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
> + #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
> + #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
> + #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
> + #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
> + #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
> + #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
> + #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
> +
> + #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
> + #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
> + BIT((x + 29)))
> + #define SPEAR1310_PCIE_CFG_VAL(x) \
> + (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
> + SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
> + SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
> + SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
> + SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
> + #define SPEAR1310_SATA_CFG_VAL(x) \
> + (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
> + SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
> + SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
> + SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
> + SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
> +
> +#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
> + #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
> + #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
> + #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
> + #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
> + #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
> + #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
> + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
> + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
> + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
> + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
> + SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
> + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
> + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
> + SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
> + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
> + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
> + (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
> + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
> + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
> + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
> + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
> + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
> +
> +#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
>
> enum phy_mode {
> SATA,
> @@ -146,12 +221,35 @@ static int miphy40lp_spear1340_sata_exit(struct
> miphy40lp_priv *priv)
> return 0;
> }
>
> +static int miphy40lp_spear1340_pcie_init(struct miphy40lp_priv *priv)
> +{
> + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
> + SPEAR1340_PCIE_MIPHY_CFG_MASK,
> + SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
> + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
> + SPEAR1340_PCIE_SATA_CFG_MASK, SPEAR1340_PCIE_CFG_VAL);
> +
> + return 0;
> +}
> +
> +static int miphy40lp_spear1340_pcie_exit(struct miphy40lp_priv *priv)
> +{
> + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
> + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
> + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
> + SPEAR1340_PCIE_SATA_CFG_MASK, 0);
> +
> + return 0;
> +}
> +
> static int miphy40lp_spear1340_init(struct miphy40lp_priv *priv)
> {
> int ret = 0;
>
> if (priv->mode == SATA)
> ret = miphy40lp_spear1340_sata_init(priv);
> + else if (priv->mode == PCIE)
> + ret = miphy40lp_spear1340_pcie_init(priv);
>
> return ret;
> }
> @@ -162,6 +260,8 @@ static int miphy40lp_spear1340_exit(struct miphy40lp_priv
> *priv)
>
> if (priv->mode == SATA)
> ret = miphy40lp_spear1340_sata_exit(priv);
> + else if (priv->mode == PCIE)
> + ret = miphy40lp_spear1340_pcie_exit(priv);
>
> return ret;
> }
> @@ -193,6 +293,70 @@ static struct miphy40lp_plat_ops spear1340_phy_ops = {
> .plat_resume = miphy40lp_spear1340_resume,
> };
>
> +static int miphy40lp_spear1310_pcie_init(struct miphy40lp_priv *priv)
> +{
> + u32 val;
> +
> + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
> + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
> + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
> +
> + switch (priv->id) {
'id' should be made as optional dt property since it's not used for 1340 no?
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
